We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,325 used machines on RESALE, but how to find them? Machine Search
used
spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1240 mm w-axis: 950 mm : CNC Radial face slide diameter: 700 mm turning speeds: 16-1250 U/min spindle drive: 30 kW table surface area: 1420x2000 mm workpiece weight: 12000 kg control: Siemens type: 840 C radial face slide travel: 170 mm spindle drive: 42 kW turning speeds: 16-1250 U/min faceplate speeds from - to: 4-315 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1400 mm y-travel: 900 mm z-travel: 1600 mm Table dimensions: 1200x900 mm spindle turning speed range: 25-1400 U/min total power requirement: 16 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 330 x 510 mm Single sided miter Variator speed setting Semi-automatic (self-lowering and rising)
used
spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm cutting width: 300 mm band speed: 20 - 100 m/min : 290 mm : 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm total power requirement: 2,2 kW weight of the machine ca.: 1050 kg dimensions of the machine ca.: 1800 x 1900 x 1750 mm - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity round maximum diameter: 300 mm Angle degrees maximum: 300 Capacity square: 3660 mm Workpiece height: 9 mm Workpiece width: 27 mm Capacity rectangle: 100 mm Band sawPegas - 300 x 320 SHI - LR MACH-ID 7631 Make: Pegas Type: 300 x 320 SHI - LR Control: PEHU Year: 2018 Capacity 90°: 300° Cutting flat 90°: 320 x 300mm Capacity L 45°: 300° Capacity R 45°: 270° Feed single stroke: 10mm Feed multiple stroke:5000mm Cutting speed Vario:20 - 100 Circle blade size: 3660 x 27 x 0,9mm Power: 2,4kW Length: 2050mm Width: 6000mm Height: 2040mm Weight: 120 ...
used
Qty. 1 Second-hand can filling line Mfc.: Transpak, Trantech Hysek, Arsopi, Krones, Pegas, Spolex, SMI, Kisters, KHS, Videojet, Ketner, Haloila, Interex, Schonau, Siemens (SSW) Built: 1991 – 2017 Capacity: 30 000 cans/h
used
Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg
used
UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy
used
spindle diameter: 130 mm x-travel: 1780 mm y-travel: 1660 mm Control: Heidenhain 355 total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel:3000 mm y-travel:2000 mm z-travel:1750 mm table-size:1600 x 2000 mm max. table load:11000 kg speeds:4000 U/min numbers of tools in magazin:60 b-axis:360 ° Servo motors are Siemens 611 IKZ pump has a max. of 120 bar
used
Amada Pega-244 Turrent Punch Press Audo index service Punch assembling jigs Tool balander 20 Ton Number of turret stations: 24 Machine is in good condition
used
Pega 244 punching machine year 1987 still in production well maintained complete with automatic loading and unloading mod. MP1020
used
Pega 244 is an extremely compact turret CNC punching machine with considerable punching power, ideal for processing medium format sheet metal. Punching capacity: 20 tons Working range with repositioning: 1000x2000mm Max thickness: 6mm Hydraulic brake and hydraulic clutch Characteristics of the CNC: Fanuc Amadam COMPLETE WITH CUSTOM MADE SOUNDPROOFING CABIN
used
Inv. Num. : 6351 Type: Pega 30507 Producer: AMADA Created: 1997 Parameters: Compressive force: 294 kN
used
CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use
used
The machine is in good technical condition. Upon prior arrangement, inspection is possible, the machine is dismantled and ready for shipment.
used
; ready to use
used
Electrical voltage 400 / 440 V Frequency 50 / 60 Hz N° Phases 3 / 3 Ph
used
Bread cutting machine Treif Pegasus 2616 -Bread cutting machine without oiling -for long loaves -complete in stainless steel -with sickle knife -Cutting width adjustable from 4 to 14mm -mobile on wheels -Year of construction 2000
used
gebr. Bread slicer Treif Pegasus 2610, overhauled, control has been renewed, completely in stainless steel version, masch.-Nr. 261007.60871.0483, 50 Hz, 400 V, 0.9 kW, year of construction 2000, weight 175 kg
used
Gebr. Bread slicer Treif Pegasus 2600, tested, function tested, machine no. 260002.60371.0189, 50 Hz, 380 V, 0.75 kW, 2.5 / 10 A, weight: 180 kg
used
A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997
used
used
saw band size 4120x34x1.1 mm; machine equipped with Band Dynamometric Tension adjustment; hydraulic/manual material clamp; equipped with 3x free-standing steel height-adjustable feed roller conveyor size 4560x720x1060 mm / size 3020x620x1060 mm / size 1000x700x1060 mm; coolant liquid pump; capacity around 320 mm; rectangle capacity 500x320 mm; capacity square 320x320 mm; cutting angle adjustable up to 45° / 60°; control panel; including 3x new saw blades
used
Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm
used
x-travel: 2600 mm y-travel: 1000 mm z-travel: 1000 mm table-size: 3.600 x 900 mm max. workpiece weight: 8.000 kg no. of flutes: 6 groove width: 22 mm flute distance: 125 spindle taper ISO: 50 DIN 69871 number of spindle speeds: 4.000 (2 Steps 0 - 1.000, U/min feed speeds: 10 - 5.000 mm/min rapid speed: 10.000 / 10.000 / 10.000 mm/min dimensions of the machine ca.: 9,82 x 5,1 x 3,16 m weight of the machine ca.: 21,5 t Control: Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Batch Mixer Dinnissen, with two paddle shaft, 10.000L
used
General SKUR0202 LocationBarneveld MakeDinnissen TypePegasus Vacuum Coater No.161633 Year of construction2016 Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Paddle mixer MaterialStainless steel Paddle mixercheck Double shaftcheck Useful capacity200 Ltr. Trough sizesdia. 750x750mm With cover(2x) Inletdia 200mm (2x) Outletdia. 350mm Half coil jacketedelectric surface heating Motor(2x) 1,1 kW 230/400 Volt Information Mounted on framecheck With switchgearcheck Total height3,1 M Weight2800 Kg Floor space3,8x2,4 M Extra SpecificationsEHEDG design Easy Clean including Coperion K-tron dosing screw including weighing cells including 2 premix tanks 0.12 kW 230/400 Volt and 1 buffer tank including air blower with filter box and air heating unit 6 kW 400 Volt type Dinnissen Paddle mixersDinnissenMixers > Paddle mixersBrand > Dinniss ...
used
General SKU396S539 LocationBarneveld MakeDinnissen (NL) TypePegasus PG 300 / 310-450-730 No.070910 Year of construction2007 Main Features MaterialStainless steel Volume300 Ltr. Motor4 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Continuous mixercheck Useful capacitymax. 300 Ltr. Trough sizes1320x850x550mm With covercheck Inlet520x270mm Outlet500x150mm Motor4 kW 380-415/660-690 Volt MaterialStainless steel 1.4301 (304) Information Total height1,2 M Weight750 Kg CEcheck Floor space2,2x1,3 M Extra Specificationsincluding 2 extra plates to regulate the product level Paddle mixersDinnissenMixers > Paddle mixersBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...
used
Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...
used
The machine is in good technical condition. Table size 1500x3000mm + accessories for rotary burning of tubes. Source Alpha In -Pegasus 2 burners / small+large By prior arrangement, the possibility of a tour in progress.
used
Bread slicer Treif PegasusManufacturer : TreifType : 2602Stainless steelType : 3-N-PE 50Hz 0,75kWProduction : 400 VoltSee picture for details
used
Treif Pegasus Bread Slicer Sickle Knife Stainless Steel? Product? Manufacturer: Treif Maschinenbau GmbH? Model: Pegasus 2622? Material: stainless steel? Condition: used, in working order, baker's condition - please clean thoroughly before use? Year of construction: 1997? Cutting width adjustable? with sickle knife? Wheeled, on wheels? Current type: 50 Hz? Operating voltage: 400 V? Nominal power: 0.75 kW? External dimensions: W.: 100 cm, D.: 67 cm, H.: 120 cm
used
1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...
used
Used Complete Can Filling Line Comac 3500 can per hour used line for cans In this used line for cans there is a Semi automatic Bulk Can High Level Depalletiser High level semi automatic sweep off type de palletizer Manufacturer COMAC The used line for cans with Gravity Can Rinser Manufacturer Eurosistemi Sri Model GRV This is a twin unit with sections in the used line for cans for 330ml cans and one other size believed to be 500 ml The wet part of the used can line is formed by the can Filler Seamer Manufacturer Comac Sri Model Pegasus 8 1M Output 3 500 PH x 330ml Vacuum Barrier Corporation liquid nitrogen dosing system For Can filler For the wet part of the used line for cans we have a Filler Level Detector Rejector of the used line for cans is Manufactured by FT Systems Sri Checking for underfills overfilled Cans and Bottle Conveyors for the entire Used Complete Can Filling Line Comac ...
used
The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...
used
The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.