pee wee used for sale

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Homag-Weeke Fräsmotor mit C-Achse, Year: 1998, Type: SMZ DIS. E13676, Motor mit Getriebe: yes, aus Maschine: Weeke 195 T, Kw output: 7,5, Volt/Hz: 315-380/400-482, Motor mit Getriebe: yes, Speed rpm: 24000, Flange motor design: yes, Year :1998

Manufacturer: Weeke , Model: PKS-CPU, Serial number: 4-086-05-0230,

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-R-A02-02-FW, SN Nummer: DD03. 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-050-DA01-01-FW, SN Nummer: DD-S 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine.

This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.

This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine.

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...

This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details.

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

This 3-axis HOMAG WEEKE BHP200/VANTAGE714 CNC Machining Centre was manufactured in 2013. It features an impressive working area with an X-axis of approximately 4300 mm and a Y-axis of around 2250 mm. The machine is equipped with a powerful 10 kW spindle capable of reaching up to 24,000 RPM and includes a 14-position automatic tool changer. If you are looking to get high-quality CNC routing capabilities, consider the HOMAG WEEKE BHP200/VANTAGE714 machine we have for sale. Contact us for further details.

This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information.

This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details.

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...

Weed killer organic with water Brand Wave weed control Hours 471 30 mtr high-pressure hose Incl extra filling hose jerry can and water softener 1000 liter water tank Incl separate spray hose up to 50 bar In good working condition see video Incl as good as new Hulco machine transporter 2600 kg version dimensions 300 x150 cm box size Machine can also work without a water tank Then you connect it to the water tap. Viewing by appointment only Trailer not included Auction-ID: A1-40282-84

Peeling machine for spelt, oats, sunflowers Built in 2020, only 3 years in operation Motor power 5.5 kW with riser for tray separation Control cabinet

Weed brush Nimos ECO-60 HM, three-point front attachment with PTO pump for brush-drive. Right-turning PTO drive in working direction! Also suitable for direct hydraulic drive. Hydraulic motor with flat-sealing hydraulic connections. For swivel functions 3 x dw required. Brush-circle D = approx. 700 mm, Swivel range from left to right approx. 250 cm. Other weed brushes stock, also hand-held and self-propelled work machine. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

directional control valve, hydraulic valve HYDRAULICS - RING WEE43G06C1 Pmax = 315 bar with 2 control solenoids 24V used ! Dimensions: 215 x 90 x 50 mm

No engine Auction-ID: A1-47380-320

Auction-ID: A1-48457-6

Weelko electric treatment table Brand: Weelko Type: Electric Treatment Couch Color: white Upholstery: artificial leather (PU) Features face cutout with removable cushion Equipped with removable armrests Including wired hand control Equipped with DewertOkin linear actuator(s) The actuator states: Model: JLDQ-19M Power supply: 24 or 29 V DC Maximum current: 5 A Maximum force: 6000 N Stroke: 65 mm Speed: 5.7 mm/s Protection class: IPX4 Actuator production date: 11/2023 Auction-ID: A1-47435-108

Weelko electric treatment table Brand: Weelko Type: Electric Treatment Couch Color: white Upholstery: artificial leather (PU) Features face cutout with removable cushion Equipped with removable armrests Equipped with DewertOkin linear actuator(s) The actuator states: Model: JLDQ-19M Power supply: 24 or 29 V DC Maximum current: 5 A Maximum force: 6000 N Stroke: 65 mm Speed: 5.7 mm/s Protection class: IPX4 Actuator production date: 11/2023 Auction-ID: A1-47435-106

Weelko electric treatment table Brand: Weelko Type: Electric Treatment Couch Color: white Upholstery: artificial leather (PU) Features face cutout with removable cushion Equipped with removable armrests Including wired hand control Equipped with DewertOkin linear actuator(s) The actuator states: Model: JLDQ-19M Power supply: 24 or 29 V DC Maximum current: 5 A Maximum force: 6000 N Stroke: 65 mm Speed: 5.7 mm/s Protection class: IPX4 Actuator production date: 11/2023 Auction-ID: A1-47435-109

Weelko electric treatment table Brand: Weelko Type: Electric Treatment Couch Color: white Upholstery: artificial leather (PU) Features face cutout with removable cushion Equipped with removable armrests Including wired hand control Equipped with DewertOkin linear actuator(s) The actuator states: Model: JLDQ-19M Power supply: 24 or 29 V DC Maximum current: 5 A Maximum force: 6000 N Stroke: 65 mm Speed: 5.7 mm/s Protection class: IPX4 Actuator production date: 11/2023 Auction-ID: A1-47435-107

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-48581-666