pee wee used for sale

Roller diameter 200 mm, coolant device and machine light

Roller diameter 150 mm, coolant device and machine light

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side

Laurijsen WeegAutomaten COMBIMAT CM-L4S Linear scales The linear scales from Combimat were specially designed as an initial model for the first first step in the automation of the packaging process. Thanks to the compact design, the weighing devices can be easily installed in any production area and can be cleaned very quickly when changing quickly when changing products. Applications The linear scales from Combimat are particularly suitable for dry, fine-grained products that can be easily conveyed in the conveyed in the vibrating chute: Tea, coffee, corn, rice, seeds, grain, animal feed, granulates, grain, etc, Advantages The weighing machines from Laurijsen WeegAutomats offer numerous advantages: - Very compact design - Machine made entirely of stainless steel - Touchscreen operation - Quick cleaning, very suitable for short suitable for short passages - Maintenance-fre ...

Machining center Type: Optimat BHX 055 Manufacturer: Homag Weeke Year: 2015 Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: Weeke Homag Sicherheitstrittmatten, Year: ca.1996, FREETEXT1: 7 Stück, FREETEXT2: 5 x 1000 X 1200, FREETEXT3: 2 X 600 X 1200, Year :ca.1996

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

Manufacturer: Weeke, Type: BP 140 Optimat, Year: 1997, Control: Woodworp, Working range X: 3600, Working range Y-axis: 1200, Working range Z: 150, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 7,5, rpm 1): 24000, Number of tool changers: 12, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Vacuum pumps m³/h: 160, Tool clamping system: HSK 63, Saw unit: yes, CE-Sign: yes, Year :1997

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Manufacturer: Weeke Einheit Bohrgetrtiebe mit 18 Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 18, Grid 32 mm: yes, Run on the machine: weeke 195 T, Price per unit Euro: 2500, Available: 4 Stück, FREE TEXT: 3360 U/min 50-60 Hz/1,5 kw,

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Homag-Weeke Fräsmotor mit C-Achse, Year: 1998, Type: SMZ DIS. E13676, Motor mit Getriebe: yes, aus Maschine: Weeke 195 T, Kw output: 7,5, Volt/Hz: 315-380/400-482, Motor mit Getriebe: yes, Speed rpm: 24000, Flange motor design: yes, Year :1998

Manufacturer: Weeke , Model: PKS-CPU, Serial number: 4-086-05-0230,

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-R-A02-02-FW, SN Nummer: DD03. 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-050-DA01-01-FW, SN Nummer: DD-S 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine.

This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.

This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information.

This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine.

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008