pedershaab used for sale

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Max. punching capacity: 600 kN Max. shear capacity: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shear Large support table on the punching side with stops Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 2,000 kg

round bar steel: 28 mm square edge steel: 25 mm L-beam: 80 x 8 mm cutting capacity: 35 t shear : steel sheet: max. 10 mm shear: flat material: 100 x 11 mm blade length: 175 mm triangle notching device for sheet until: 8 mm no. of strokes: max. 35 Hub/min work stroke: ca. 35 mm total power requirement: 1,5 kW weight of the machine ca.: 535 kg dimensions of the machine ca.: 0,97 x 0,45 x 1,55 m Condition: ready for operation: Electric 380 Volt: Triangle notching device: Length stop electr.: Rotary base: Moveable: Foot switch: Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 16 ...

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 28 mm square edge steel: 25 mm L-beam: 80 x 8 mm notching cap. mild steel max.: 7 mm cutting capacity of the vertical shear: 350 kN Punch power: 190 kN shear: flat material: 100 x 11 mm shear: length of knifes: ca. 175 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 1,0 x 0,5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired

Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026

Offer 26088 Technical data: - Flat steel shears - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 15 mm - E. Contact stop - various punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg

round bar steel: 32 mm square edge steel: 60 x 6 mm L-beam: mm pressure: 50 t stroke: 10 - 28 mm total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 m Maximum pressing force 50 t FLAT STEEL SHEAR PERFORMANCE Flat steel: 150 x 15 mm or: 180 x 18 mm PERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mm Angle steel 90°: 100 x 10 mm 45°: 50 x 6 mm PERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mm Square steel: 30 x 30 mm PERFORMANCE SQUARE NOTCHER: 60 x 6 mm Sheet metal up to: 10 mm Notch width: 42 mm: Notch depth: 55 mm PERFORMANCE HOLE PUNCH Punching force: 50 t Stroke: 10 - 28 mm Punches: 27 in 14 mm Projection: 155 mm GENERAL DATA Drive power: 4.0 kW Oil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mm Weight approx.: 840 kg Translated with DeepL.com (free version) The data for this ad was creat ...

PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

Manufacturer: Pedrazzoli Model: STERN B.65 Year of Manufacture: 2013 Type of Machine: Pipe End Forming Machine Certification: CE Marked Find more here - / Contact us at -

round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.

punching force max.: 50 t throat: 510 mm stroke: 32 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: 35 bei 10 mm Hub/min Working height: 1070 mm daylight: 350 mm table width: 255 mm dimensions: ca. 1080 x 650 x 1680 mm material layer: 630 X 535 weight: ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Centrifugal pump, water pump, peripheral pump, domestic water pump, cooling water pump -Manufacturer: Pedrollo, Peripheral pump surface pump type PK60-1 -Connection: 220/380 volts -Power: 0.37 kW -Speed: 2900 rpm -Flow rate: max. 40 l/min -Suction height: max 8 m -Quantity: 1x Pumps Available -Price: per piece -Dimensions: 300/140/H153 mm -Weight: 5.9 kg/pc.

Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 5 -Steel sheet: up to 5 mm -Round steel: up to 13 mm -Overall dimensions: 500/150/H1025 mm -Transport dimensions: 850/150/H370 mm -Weight: 22 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3 BR 6 -Steel sheet: up to 6 mm -Round steel: up to 13 mm -Lift-down device: -Overall dimensions: 1175/150/H410 mm -Weight: 24 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -Lift-down device: -Overall dimensions: 295/125/H865 mm -Transport dimensions: 690/125/H310 mm -Weight: 11 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: -Overall dimensions: 480/210/H1360 mm -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Pedro Roquet, Double hydraulic pump -Type: 1LS9 3DJ23FR 1L03DB24R -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 210/155/H120 mm -Weight: 5.2 kg

Press company Walter SL 60t (beverage vending machine) 1991 Punching machine Peddinghaus 1997 Longitudinal seam welding machine Weil 2007 NC Milling Machine FP-4MA N/A Lid CNC Milling Machine DMC63-V N/A Lid Maho Automatic Circular Saw KKS 450 R 2008 Kaltenbach MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius

Technical data drilling rig: Manufacturer: Peddinghaus Type: BDL 760/3 Machine No.: 4742570604001 Technical data metal band saw: Manufacturer: MEBA Machine Type: 400DG-700 Engine No.: 16835 Year of Make: 2001 Cutting range: 90° Round: 406 mm, Flat: 700x400 mm Mitre left: 45° Round: 400 mm, Flat: 560x400 mm 30° Round: 300 mm, Flat: 300x350 mm Mitre right: 45° Round: 400 mm, Flat: 600x400 mm Clamping range bundle tension: Width: 0-700 mm Height: 20-406 mm Remnant lengths: approx. 75 mm (manual operation) Cutting speed: 18 to 95 m/min - infinitely variable 15 to 150 m/min - AC drive (option) Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 6760 x 41 x 1.3 mm Saw blade tension: hydraulic Dimensions and weight: Weight of the machine: approx. 3,300 kg (net) Dimensions of the machi ...

This cube has 3 magnetic clamping area. Dimension each area: Length: 2,000 mm Width: 2,000 mm Height: 2000 mm