pedax used for sale

Peddimat machining center for section steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of construction: 1993 System consisting of: Longitudinal saw, drilling rig and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of construction: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized mitre adjustment Hydr. Locking mechanism for mitre swivel in the range of 45 / 45° Kneeling Inlet and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling rig Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each incl. internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system incl. measuring discs on the inlet and outlet sides automatic hold-down device each on the feed and discharge side automatic "Z" tower adjustment by DS servo  ...

4-fold Combined Sectional Shear make PEDDINGHAUS type PeddyMachine -No: 4061257680021, built in 1980PROFILE STEEL SCISSORS:L-steel 90 ° cut: 80 x 8 mmL-steel 45 ° cut: 50 x 6 mmPROFILE STEEL KNIFE:L-steel 90 ° cut: 60 x 6 mmT-steel 90 ° cut: 60 x 7 mmL + T steel 45 ° cut: 50 x 6 mmSPECIAL BLADES:U-steel: 80 mmI-steel: 100 mmFlat steel: 80 x 12/120 x 8 mmSTEEL BAR CUTTER:Round steel: 28 mmSquare steel: 25 x 25 mmFlat steel shears: 100 x 11/10 mmThree-notch claw: 8 mmStrokes per minute: 36Drive power: 1.5 kWWeight: 460 kgExternal dimensions approx. 1200 x 1000 x 1600 mmWith:- electrical alignment and footswitch- Triangle notching (upper and lower knife missing!)- bogieused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We wo ...

Section steel shears make PEDDINGHAUS type PeddyMachine -No: FF 3401PROFILE STEEL SCISSORS:L-steel 90 ° cut: 80 x 8 mmL-steel 45 ° cut: 50 x 6 mmPROFILE STEEL KNIFE:L-steel 90 ° cut: 60 x 6 mmT-steel 90 ° cut: 60 x 7 mmL + T steel 45 ° cut: 50 x 6 mmSPECIAL BLADES:U-steel: 80 mmI-steel: 100 mmFlat steel: 80 x 12/120 x 8 mmSTEEL BAR CUTTER:Round steel: 28 mmSquare steel: 25 x 25 mmFlat steel shears: 100 x 11/10 mmThree-notch claw: 8 mmStrokes per minute: 36Drive power: 2.2 kWWeight: 460 kgOutside dimensions approx. 1200 x 1000 x 1600 mmWith:- Underframe- Square notchused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

4-way comb. Section steel shears make PEDDINGHAUS type Peddimaster 28/40 HMachine -No: 4421050787006Technical specifications:FLAT STEEL SHEARSFlat steel with little deformation up to: 300 x 10 mmor: 250 x 10 mmor: 200 x 11 mmor: 75 x 15 mmKnife cutting length: 300 mmWorking height: 830 mmPROFILE STEEL SHEARSShear cross section max .: 1300 mm²Infinitely adjustable stroke: 10 - 26 mmL-steel 90 ° cut up to: 80 x 8 mmL-steel 45 ° cut up to: 50 x 6 mmRound steel: 29 mmSquare steel: 25 mmWorking height: 1088 mmNOTCHERSquare notcher sheets up to: 8.0 mmL-steel up to: 60 x 6 mmU-steel in the flange: 50 x 25/60/65 mmI-steel in the flange: 80/100 mmNotch width / notch depth: 42/55 mmHOLE PUNCHPunching force: 280 kNInfinitely adjustable stroke: 10 - 26 mmholes with punching table: 27 in 8 mmU-steel in the flange: 65 - 200 mmU-steel / I-steel in the web: 80 - 260 mmPunch projection: 305 mmWorking ...

4-fold combined profile steel shears make PEDDINGHAUS type Peddimaster 80/110, built in 1993Technical specifications:FLAT STEEL SHEARS:500 x 18 mm:400x19mm:300x22mm:200x25mmKnife length: 510 mmPROFESSIONAL STEEL SHEARSAngle steel 90°: 120 x 13 mm:150x100x12mmAngle steel 45°: 100 x 10 mmRound bar: 45 mmSquare steel: 40 mmSQUARE NOTCHSheets up to: 13 mmLatch width: 65 mmNotch depth: 85 mmHOLE PUNCHPunching force: 80 tProjection: 510 mmStroke continuously adjustable: 10 - 30 mmHoles: 30 in 20 mm:27 in 20mmGENERAL MACHINE DATANumber of strokes: 22 / 16 h/minOil filling: 80 lDrive power: 7.5 kWWeight approx.: 2450 kgExternal dimensions approx.: 1990 x 850 x 1890 mmwith- stop table- 2 footswitches- Rectangular notcher- large lot of punches and matricesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

see data sheet available under electricity immediately

see data sheet immediately available under current

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

pressure: 110 t punching cross-cut in cmm: stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maximum punching force: 1100 kn Maximum shear force: 1700 kN Punch projection: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down for the flat steel knife Square notcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Voltage: 220/ 380V, nominal current: 8/ 5A.

pressure: 80,0 / 110 t punching cross-cut in cmm: 27,0 in 20 mm L-beam: 120 x 13 mm L-beam: T 120 x 12 mm shear: flat material: 500x18 / 400x19 mm throat: 510 mm work height max.: 1050 mm total power requirement: 6,5 kW weight: 1650 kg range L-W-H: 1750 x 850 x 1850 mm very good condition () Furnishing: - hydraulic, combined profile steel shears with release station with punching station .. punching capacity 800kN Flat steel shears .. Shear capacity 100kN Angle steel scissors Angle steel knife for cutting 90 ° & 45 ° miters Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Offer 22562 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 500 x 18 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 120 x 13 mm - at 45° 90 x 10 mm - Round steel 45 mm - Square steel 40 mm - Notcheter - With square notch for sheets up to 13 mm - Jack width / depth 65 / 85 mm - With triangular notch for sheets up to 13 mm - Notch depth 70 mm - Hole punch - Punching force approx. 80 t - Projection 510 mm - Stroke approx. 10 to 29 mm - perforates in steel up to 39 mm Ø in 16 mm - perforates in steel up to 30 mm Ø in 20 mm - Stroke rate at 20mm hole. / Scissors 30 / 20 1/min - E. contact stop - various punches + matrices - Drive 400 V / 7.5 kW - Dimensions W 900 x H 1800 x D 1800 mm - Weight approx. 2600 kg ...

Max. punching and shearing capacity: 1000 kN Receptacle for hole diameters up to 90 mm Punches 31 mm holes in 25 mm steel Shears on the flat steel shears to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as desired Weight: approx. 3,000 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Max. punching and shearing capacity: 500 kN Punches e.g. 20 mm holes in 20 mm steel Shears on the flat steel shears on 350 mm to 13 mm steel Further technical data on request With an assortment of punches and dies as desired

Offer 23278 Specifications: - Sheet metal and flat steel shears, knife length 175 mm - cuts flat steel up to 50 x 15 mm - or up to 140 x 8 mm - Profile - steel bar shears - cuts - angle steel up to 80 x 8 mm - Round steel up to 28 mm - Square steel up to 25 mm - Hole punch - punching force 275 KN - Stroke 24 mm - Projection 155 mm - perforated in steel up to 20 Ø in 10 mm - or up to 27 Ø in 6.5 mm - Drive 400 V / 3 kW - Space requirement approx. W 500 x H 1500 x D 855 mm - Weight approx. 450 kg - various punches + matrices

Specifications: - Printing capacity 25 t - Flat steel shears - Flat bars up to 100 x 11 mm - or: 60 x 10 mm - Sectional steel shears - L- and T-blade at 90° 80 x 8 mm - at 45° 50 x 6 mm - Bar steel shears for round steel + square steel - Clinker with square notcher for sheet metal up to 8 mm - Stroke rate 30 1/min - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x D 1000 x H 1600 mm - Weight approx. 650 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Hydr. comb. Sectional steel shears with hole punch Specifications: - Flat steel shears: - Knife length 420 mm - Cutting capacity, flat up to 400 x 18 mm - Profile steel bar shears: - Angle steel 120 x 10 mm - Square steel / round steel 30 / 32 mm - Notching device: - Sheets up to 13 mm - Latch width / latch depth 52 / 70 mm - Hole punch: - Punching force 800 KN - Projection 250 mm - Punches in steel up to e.g. 31 mm Ø in 18 mm or 25 mm Ø in 20 mm - E. footswitch - Drive 400 V / 4.0 kW - Space requirement approx. W 600 x H 1700 x D 980 mm - Weight approx. 1200 kg -with: - E. footswitch - E. Stroke - Various punches with die - Stop support table - Separate tool cabinet

: Ja : Stanzkraft 800 kN frequency: 50 Hz current: 17/11 A voltage: 220/380 V round bar steel: 32-17 mm square edge steel: 30-18 mm : 100 x 10 mm flat steel: 350 x 16 mm throat: 200 mm work height max.: 1107 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200 x 700 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical data: Round steel 27 mm Square steel -- mm Angle steel 100 x 10 mm Flat steel 10 mm Punching pressure 40 t weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,800 mm

Drilling machine Peddinghaus TDK 1000/9 Peddinghaus LC 1250 Saw Peddinghaus Signo 05 Markierer Siemens Sinumerik control system Year of construction: 1990 Maximum width of the workpiece (90 degrees): 1000 mm The cutting unit can be rotated 45 degrees to the right and left. Maximum workpiece width (45 degrees): 700 mm Maximum workpiece height: 420 mm (drill) - 440 mm (chopper) Maximum hole diameter: 40 mm Number of drill bits: 9 (3-3-3) Maximum saw blade diameter: 1250 mm Saw blade width: 9 mm Total equipment weight: ~17.5 t Equipment pick-up size: - Drill: 5000 x 2100 x 3000 mm - Saw: 3500 x 1300 x 2500 mm - Marking: 1400 x 1200 x 1200 mm - Controller: 1200 x 1000 mm - Hydraulic power unit: 1000 x 500 mm

The mubea and Peddinghaus tools pictured are not sold completely. You can tell us what stamps and dies you need, so that we put together an individual assortment for you.

Pipe end notching machine make PEDI type Gr. IIITool receiving width: 280 mmmax. pipe diameter 90 °: 90 mmwith notch 45 °: 50 mmCurrently equipped with maximum number of tools: 3 toolsTool size: 50 to 50 mmTool size: 45 to 50 mmTool size: 3/4 to 3/4 Diameter of the eccentric shaft: 70 mmDrive power: 2.2 kWWeight: 750 kgExternal dimensions L x W x H: 800 x 1000 x 1650 mmWith- additional tools:46 to 50 mm, 1 to 1- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type hydraulics 1000 NMachine -No: 4206879484010, year of construction 1984Printing capacity: 100 tStroke infinitely adjustable: 10 - 100 mmStrokes per minute: 80 - 34Projection: 510 mmWorking height: 1074 mmInstallation height: 440 mmpunched: 39 in 20 mmor with optional equipment: 65 in 12 mm: 90 in 8.5 mm: 130 in 6.0 mmOil filling: 150 lRated power: 15 kWWeight approx: 4,4 tExternal dimensions approx L x W x H: 1954 x 1000 x 2250 mmWith- Coordinate template table for workpiecesxa0xa0 up to 500 x 1000 mm- Swivel bracket- Ball support table- a lot of accessoriesused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Hydr. Pipe expanding machine Fabr. IBP Pedrazzoli Fabr. Stern Brown 65Year 1984Pressure force: 16 tMax. Pipe size: 300 x 1.9 mmWorking speed: 60 mm / sec.Return speed: 110 mm / sec.Max. Mandrel stroke: 190 mmDrive power: 15 hpPower connection: 380 V / 50 HzExternal dimensions L x W x H: 1800 x 1200 x 1500 mmWith- 10 sets of tools 160 - 300 mm- separate control cabinet with controlsxa0xa0xa0 On / off, vise open / close, head back / forth,xa0xa0xa0 Pause / Emergency- FootswitchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Hydraulic hole punch PEDDINGHAUS Type Hydraulic 1000 Masch. No. 42068 752 83 004 Year of construction 1983 Punching force 100 ton. Hole diameter 30 in 20 mm Sheet metal 40 in 15 mm Sheet metal projection 510 mm Motor power 8.8 kW Rated power 380 volts, 50 Hz Hydraulic oil Tank capacity 80 litres - Coordinate stop table 1000 x 720 mm (self-made) - Punching saddle for dies max. 140 mm- Adapter for cutting insert 140 mm to 63 mm- Punch holder with union nut Stop in the projection up to 450 mm Side stop left 550 mm Side stop right 1300 mm - stroke infinitely adjustable - built-in punching tool approx. 34 mm space requirement of the machine L x W x H 1770 x 2000 x 2380 mm Machine width without stop rail right 1200 mm weight approx. 3500 kg good condition; used

Hydraulic Pedrazzoli band saw, complete with automatic advancement, new electronics, video touch, hydraulic descent speed variator and belt speed variator

pressure: 100 t punching cross-cut in cmm: -- stroke: 100 mm throat: 510 mm work height max.: 1100 mm Twist power: 31 Durchm. in 25 mm channels - flange: 100-400 mm Number of ventilators: 80-400 mm : 100-400 mm : 100-550 mm punch stroke: bei 20 mm Hub: 60 p.Min sheet thickness max.: bei Luftbiegung: 10 mm total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,7 x 0,9 x 2,3 m Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peddinghaus Model 210 Super 13 G flat, profile and bar steel shears with notch and perforator in use. Universal profile shears, steel shears; - Pressing force 60 ton; - Flat steel shears; - profiled shears - guillotine shears; -Clinker; - Perforated die-cutter; -Documentation/instruction manual for the machine available.

Peddimax 1002 combi punch/shear/notching with CNC Siemens X amp; Y positioning table for punchstation with CNC MPS pushfeed system gt; 6 meter for auto cutting flat steel (with hydraulic workpiece clamping) with conveyor belt for cut pieces central lubrification Dia x sheetthicknessdia: dia 31 in 25 mm / dia 90 in 10 mm Depth of throat 510 mm Max hole dia. Ø 90 mm Max cutting-thickness in plate: 500 x 20 mm Blade length 510 mm 90°-cut corner 150 x 150 xnbsp; 12 mm 45°-cut corner 100 x 100 x 12 mm Cut to length round/square 50 mm Max material -thickness by notching: 90 x 52 x 13 mm Punching pressure: 100 ton Power needed: 11 kW Length: 1980 mm Depth: 1020 mm Height: 2060 mm Weight: 3 ton

5-way combined profile steel shears make PEDDINGHAUS type 210 Super 13Machine -No: 580AC015 built in 1979Technical specifications:Flat steel: 200 x 13 mmL-steel: 120 x 13 mmU-steel: 180 mmRound steel: 45 mmSquare steel: 40 mmPunching force: 65 tholes: 27 in 19 mmor: 90 in 5.5 mmStroke: 25.5 mmProjection: 370 mmWeight approx: 2100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type 225 H 13Fabr. -No: 818C004 built in 1975Punching force: 50 tProjection: 370 mmStroke: 60 mmOil content: 120 lStrokes per minute: 34punches: 25 in 16 mmor: 20 in 19 mmDrive power: 10 hpDimensions: 2230 x 860 x 1680 mmWeight approx:1,0 tWith- several stamps and diesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized punch PEDDINGHAUS type Forax 25 EMasch -No: 4220252183013 Year 1983Punching force: 25 tDischarge: 185 mmPunches: 27 in 7with special device: 39 in 5or: 58 in 3.5or: 90 in 2.2Stroke length: 18 mmStrokes per minute: 58Installation height: 189 mmWeight approx: 340 kgWith- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw (chop saw) make IPB Pedrazzoli type Brown MasterSaw blade diameter: 275 mmMiter adjustment via turntable: 0 - 45 ° left2 saw blade speeds: 55/85 rpm.Drive power: 2.5 / 3 kWSpeeds Engine: 1400/2870 rpmExternal dimensions W x D x H: 1000 x 650 x 1800 mmWeight approx: 200 kgWith- on underframe- Quick-action vise- Length stop- Cooling device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal and steel shears manufactured by PEDDINGHAUS type 4 BR 8Year of construction 2013Sheet steel up to: 8,0 mmRound steel up to: 20 mmSquare steel up to: 18 mmKnife length: 175 mmWeight approx: 43 kgExternal dimensions: 600 x 18 x 500 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined lever shears make PEDDINGHAUS type 5 RP 10Machine -No: 992815Technical specifications:Blade length: 175mmPerformance sheet steel up to: 10 mmPower angle iron: 80 x 8 mmPerformance bar steel shears round: 22 mmPower bar steel shears square: 20 mmPerformance profile steel shears: 60 x 7 mmDimensions approx.: 700 x 200 x 700 mmApprox. weight: 107 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type: Profile steel shears with punching Manufacturer: PEDDINGHAUS Model: 5-fold combined profile steel shears with punching Condition: very good Offer type: used machine Specifications: Achievement: round = Ø 20 mm, flat = 80 x 12 mm Angle steel = 50 x 50 x 6 mm T-steel = 50 x 6 mm Drive type: by hand Note: two machines on a stable, mobile substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be visited and demonstrated by us. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.