pe pipe used for sale

General SKU379X949 LocationBarneveld CEcheck MakePlastic Systems Main Features MaterialAluminium/Stainless steel Volume30 Ltr. Motor1 KW Specified Features - Miscellaneous dryer Dryer(compressed-air desiccant dryer) Capacity30 l. MaterialStainless steel With jacketcheck General TypeDAC 30 No.DAC001-07 Year of construction2006 Extra SpecificationsHopper capacity: 30 dm³ (≈ 30 L) Process air flow: 7–20 Nm³/h Process temperature range: 50–150 °C Heating power: 0.95 kW Total installed power: 1.0 kW Energy consumption at 80 °C: 0.11–0.29 kW (listed range) Compressed air (process) flow: 6–16 Nm³/h Compressed air (regeneration) flow: 4 Nm³/h Total max compressed air flow: 20 Nm³/h Required compressed air pressure: 6–8 bar (oil- and water-free) &:nbsp:Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine che ...

Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE.

General SKU379X941 LocationBarneveld CEcheck MakeIntron Main Features MaterialMild steel Motor0.05 KW Specified Features - Miscellaneous Motor0,05 kW, 115/230 volt MaterialMild steel With jacketcheck General TypeCeast 9050 Mach.No.9050B18055 Year of construction2019 Floor space1,0 x 0,45 m Total height0,95 m Weight220 kg Extra SpecificationsImpact Energy Range: 0.5 J to 50 J (0.37 – 36.9 ft-lb).Display &:amp: Control: Integrated touch panel with embedded PC for test control and results. (as is)&:nbsp:Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal ...

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

PELLIZZOLI HEAVY DUTY GRANULATOR, Heavy duty, high quality granulator for rubber and plastics, sturdy machine, very well constructed, 1.500 mm.wide rotor, Ø 800 mm - open rotor, powerful 132 kw drive, n.15 rotating new knives 50 mm.long + spare set, n.2 screens: holes 50 mm + 8 mm., machine prepared to be connected to a chiller to perform a thorough cooling, material sucking unit + dust sucking unit., This machine was new in 2005 but it has been working only 3 months on a pilot project., The machine is offered reconditoned, Complete with CE compliance, electrical drawings, manual., installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.500 mm. (59), conditions: fully reconditioned, type: heavy duty - open rotor for rubber and plastics

General SKU050G197 MakeMachinefabriek Heesen N.V. Boxtel TypeMonoroll Year of constructionunknown LocationBarneveld Main Features Motor5.5 KW Inlet diameter175 mm Width40 mm Specified Features - Roll compactor Granulatorcheck Roll sizesø 130 mm Ring dieø 175 x 40 mm Number of dies available:1 Die perforationø 4 mm Number of press rolls1 (500 rpm) Motor5,5 kW(380 V, 1440 rpm) Inletø 150mm Outlet175 x 175mm General Mounted on wheelscheck Floorspace1,3 x 0,6 m Total height1,4 m Weight450 kg Extra SpecificationsWith stainless steel ring diePowdered foodsStarchSugarAnimal feedConfectionerySolid pharmaceuticsMinerals & inorganicRoll compactorsHeesen BoxtelIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical  ...

Color: RAL 7035 light grey, RAL 7012 basalt grey, RAL 5012 blue grey, the machine’s inverter is defective. Accessories: electromagnetic clamping plate 400x250mm, with pole pitch 5mm and holding force control, automatic vertical infeed with infeed program and digital display for vertical and cross movement, automatic central lubrication system, wet grinding unit with paper belt filter system for filter paper 460x200mm with filter fineness 0.016–0.025mm, electric wheel dresser with dimensional compensation and operating manual. An on-site inspection is possible.

tool diameter: 18 mm adjustability of the setting guage: 130 mm max. dia. of grinding wheel: 100 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.55 x 0.4 x 1.11 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU201P083 MakeESCHER WYSS TypeH100 No.2652 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor37 KW Inlet diameter1000 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity180 Ltr Basket sizesdia.1000mm x600mm Max. loading weight232 Kg Hydraulic drivecheck With hydraulic unitcheck Motor+/- 37 kW, 380 Volt With variable speed drivecheck Max. basket speed1530 rpm With hydraulic unitcheck Motor0,75 kW Inletdia.155mm Solids outlet200x200 mm (screw) Liquid outlet440x185 mm MaterialStainless steel General Mounted on foundation platecheck Floorspace3,4x1,6 m Total height2,3 m Weight3600 kgGeneric medicinesPeeling centrifugesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicEscher WyssIndustries > Pharmaceuti ...

Grouping table Manufacturer: Pester Type: PEWO-collect Year of Make: 2017 Machine number: Machine Description Group table PEWO-collect For manual packaging of pre-grouped containers or single folding cartons Compact GMP design in balcony construction Easy accessibility and best ergonomics Frame Balcony construction with free access to the work area GMP-compliant machine design Mobile with steerable castors 1,500mm x 1,400mm Infeed height: 900mm - 950mm Product transport Treadmill, 1,400mm long, 210mm wide Infinitely variable speed Maintenance carried out: Machine in very good general condition Description subject to change

General SKU264P392 MakeKrauss Maffei AG (DE) TypeHZ 40 Si No.9556 Year of construction1984 Mounted on framecheck Main Features MaterialStainless steel Motor5.5 KW Inlet diameter400 mm Specified Features - Peeling centrifuge Peeler centrifuge:Horizontal Siphon peeler centrifuge: Capacity9,8 Ltr Basket sizesdia.400mm x200mm Max. loading weight12,1 KG Hydraulic drivecheck With hydraulic unitcheck Motor5,5 KW, 380/660 Volt (Ex) Max. basket speed3000rpm With scrapercheck Hydraulic operatedcheck Solids outletdia.100mm Liquid outletdia.90mm MaterialStainless steel General LocationBarneveld With switchgearcheck Floorspace1,7x1,4 M Total height1,9 M Weight1650 KG ATEX designedcheck Extra SpecificationsFilter area 0,25m2,, with spare basketGeneric medicinesPeeling centrifugesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDye ...

General SKUR1092 LocationBarneveld MakePentas (CZ) Main Features MaterialStainless steel Volume235 Ltr. Specified Features - Silo Silocheck Opencheck Capacity235 ltr. Diameter775mm Cylindrical height300mm Conical height600mm Conical bottomdouble conical bottom Inletdia. 775mm (top) dia. 150mm ( wall) Outletdia. 150mm MaterialStainless steel General Type235 ltr. Year of constructionUnknown manufacturer plate is missing Mounted on legscheck Floorspace1,1x0,9 M Total height1,7 M Weight320 Kg Extra Specificationsequipped with DN 150 rotary valve TBMA type HARD-150X-1 (Ex)including big bag lifting beam brand Tiger 970x970mm and Demag hoist of 2 tons type E22This silo has an upper inlet where product can be filled by unloading a big bag. a second product can be added via the side and a partial double-walled cone,&:nbsp:or an extraction system can be set upPaints & coa ...

General SKUR0471 MakeTMT / Pentas LocationBarneveld CEcheck TypeSF625/1 Main Features MaterialStainless steel Motor0.25 KW Inlet diameter500 mm Specified Features - Bag dump station Metering screwcheck Screw diameter190 mm Pitch135mm Shaft diameter65 mm Screw length1680 mm With hoppercheck Hopper sizesø 700 mm x 950 mm Inlet150 x 500 mm Outletø. 200 mm With motor0.25 kW (400 V (Ex)) Screw speed5.6 rpm Bag dump stations MaterialStainless steel General No.3807/01 Mach.No.3807/01 Year of construction2011 Year of construction2011 Mounted on legscheck Floorspace2,7x1,1 M Total height1,6 M Weight500 Kg Extra SpecificationsIncluding Demag hoist of 2 tonsThe silo has an upper inlet where product can be filled by unloading a big bag. A second product can be added via the side and a partial double walled cone, or an extraction system can be set up.Paints & coati ...

General SKU166B785 MakeJ.S. Petzholdt TypeKM 10 No.10248 Year of construction1976 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor4.36 KW Specified Features - Processing vessel Universal mixercheck Capacity10 l. Vessel sizesø 300 x 230 mm Outletø 50 mm With motor0,66 kW 220 V 3000 rpm With variable speed drivecheck Rotor speed181-392 rpm With lump breakerhomogeniser With motor2,2/3,7 kW 380V 700/1400 rpm Rotor speed0-10000 rpm With jacketcheck Processing vessels MaterialStainless steel 1.4552 General With switchgear(as is) Floorspace1,4 x 1,4 m Total height2 m Weight650 kg Extra SpecificationsWith vacuum pump: suction capacity: 10 m³/hGeneric medicinesOintmentsBiotechnologyPlastic & polymersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectioneryBiopharmaceuticalAPIProcessing vesselsJ.S. PetzholdtIndustries > Phar ...

pressure: 100 t distance between columns: 400 mm stroke: 20 - 140 mm table surface area: 900 x 710 mm ram surface: 560 x 450 mm ram adjustment: 80 mm dayligth: 470 mm no. of strokes: 70 Hub/min total power requirement: 10,5 kW weight of the machine ca.: 9 t dimensions of machine L x W x H: 1,98 x 1,60 x 3,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU281N330 LocationBarneveld MakeRobatel slpi TypeEH 1050 No.B89259C Main Features MaterialStainless steel Motor22 KW Inlet diameter1050 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 Ltr. Basket sizesdia. 1050x480 mm Max. loading weight237 kg Motor22 kW, 220/380 Volt Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Inletdia. 85 mm Solids outletdia. 250 mm MaterialStainless steel General Year of construction1990 Mounted on framecheck With switchcheck Floorspace3,2x2,5 M Total height2,3 M Weight8100 KGGeneric medicinesPeeling centrifugesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicRobatelIndustries > Pharmaceutical > Generic medicinesCentrifuges > Peeling centrifugesIndustries > Ch ...

Straight Machine Ecomatic Direct Dampening system Remote control of ink and registers PWHA Semi automatic plate change Automatic washing for ink rollers Automatic washing for blankets Automatic washing for impression-cylinders Technotrans Refrigeration Double diameter cylinders Powder sprayer High pile delivery Free of damages In production

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Electrical characteristics Group brand: Electro Diesel / COGENERGAZ Perkins Engine Number of hours 5500 Voltage: 400 V Frequency: 50 Hz Alternator (Leroy-Somer) Model: LSA 49.1 L9 C 6/4 Date: 03/2003 Continuous power: 880 kVA Standby power: 920 kVA

ELB PERFEKT BD10 SPS surface grinding machine was built in 2004 in Germany by ELB-Schliff Werkzeugmaschinen GmbH. The machine is used for precision grinding of workpieces with a maximum weight of 1000 kg. The machining process is carried out fully automatically on a large magnetic plate or directly on the work table. The grinding head, consisting of a spindle and grinding wheel, moves along guide rails to ensure an even and accurate surface finish. The ELB SCHLIFF PERFEKT BD10 SPS magnetic surface grinding machine is also equipped with, among others, a cooling system with a belt paper filter, which cleans the coolant after machining and allows it to be reused in the next process. The total weight of the machine is 6300 kg. Technical specifications of the ELB PERFEKT BD10 SPS grinding machine - magnetic plate dimensions (L x W): 1000 x 750 mm - maximum grinding dimensions (L x W x H) ...

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.

PEMA HPS 3500 & TPS 3500 welding positioner was built in 2021 in Finland by Pemamek Oy Ltd. The system consists of two, extremely versatile machines – the HPS 3500 headstock and the TPS 3500 tailstock with a combined payload of 7 tonnes. This solution is dedicated to lifting and rotating long workpieces, making it ideal for the production of, among others, wind towers, trailer frames or tubes. Both machines can work together or independently. The stepless height adjustment ensures precise adjustment of the working parameters to the dimensions of the workpieces. Technical specifications of the PEMA HPS 3500 & TPS 3500 welding positioner - maximum payload: 7 t (headstock 3.5 t + tailstock 3.5 t) - rotation speed: 0.06-1.3 rpm - tilting axle height adjustment range: 700-1500 mm - work table plate diameter: 950 mm - T-slots on work table plate: M20 DIN508 (4 pcs.) - maximum torque ...

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

Lot 85: (1975) 100t IWK Eccentric Press Industrial Eccentric Press for High-Capacity Stamping This 100-ton eccentric press from 1975 features a robust electrical configuration designed for versatile industrial manufacturing. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: IWK Model: PEDRS 100 Year of Manufacture: 1975 Machine Number: 22/20076/3 Circuit Diagram Number: 911 871 Nominal Force: 100t Mains Connection 1: 380 V, 3-Phase, 50 Hz, 36 A Mains Connection 2: 220 V Max. Back-up Fuse: 80 A Control Voltage: 220 V (AC) / 24 V (AC) / 24 V (DC) Lighting Voltage: 220 V

; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

; Gross weight [kg]: 2950; Engine: Perkins 1706A-E93TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 385

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type PEC Partner Equo Colona, on mobile base, new 2022! (in as-new condition). Designed for handling plastic crates with a maximum filled weight of 30 KG. Maximum overall radius 3.970 mm, maximum usable radius 3.540 mm. Vertical stroke 2.200 mm. Min/max distance from floor to top of crate: 360/2.560 mm. Overall weight without load: 1.870 kgs. With extendable console and special gripper for unstacking, rotating and stacking crates 600 x 400 x 230 mm. Also suitable for taller crates. With operating manual, pneumatic diagram and spare-parts list in Dutch (as pdf).

Item No.: PD-DEF4-SM - Filter area 4m² - With integrated residual filtration and tilting rail for opening the pressure vessel - With new safety valve - Dosing pump HB 43 with stainless steel pump head - Thread 38Pf - 1 year functional warranty

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg

Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Centrifugal pump, water pump, peripheral pump, domestic water pump, cooling water pump -Manufacturer: Pedrollo, Peripheral pump surface pump type PK60-1 -Connection: 220/380 volts -Power: 0.37 kW -Speed: 2900 rpm -Flow rate: max. 40 l/min -Suction height: max 8 m -Quantity: 1x Pumps Available -Price: per piece -Dimensions: 300/140/H153 mm -Weight: 5.9 kg/pc.

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/110 ...

Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 6x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: 0.22 kW 17250 rpm at 300 Hz -Collet holder: Ø 8 mm -Thread: right -Number: 3x engines available -Price: per piece -Dimensions: 200/80/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 133 volts -Power: 0.15 kW 11160 rpm at 200 Hz -Recording: Ø 15 mm -Thread on the left -Number: 6x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.7 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Manufacturer: Perske, milling motor type VS 31.09/2 -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Shaft mount: Ø 20 x 10 mm -Number: 3x engines available -Price: per piece -Dimensions: 250/60/H155 mm / 240/60/H140 mm -Weight: 3.4 kg/pc.

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg

Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg