We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,225 used machines on RESALE, but how to find them? Machine Search
used
Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!
used
used
Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...
used
Pausch X-ray imaging workstation Compact CS 2000 with the following system components: Generator Editor Hfe 501 Tube Siemens SV 150/33/78R-S 0.6/1.2 Vertical tripod Pausch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
used
Dead weight: 6.25t, tires: 405/70-20, 46-5 kW, with pallet fork
new
CROCODILE SHOVEL with 2 rear hyd. Cylinders, strong double-stiffened hold-down, available in different working widths and with different mounts, Other mounts such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer also available!
new
NEW, 219 kg dead weight, 2 cylinders, with Euro mount, Also other mounts like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
new
NEW, 180 cm width, 284 kg net weight, with Euro mount, Also other recordings like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
new
0.50 m³ capacity, 141 kg net weight, with Euro mount, also other recordings such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
new
Heavy lift bucket 200 cm with Euro mount, Also other shots like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
new
NEW, 2.15 m³ capacity, 585 kg net weight, with Euro mount, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
used
Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
used
VERINOX JUNIOR 1000 A, universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Preparation uses: cheese, salami, pasta, confection of ...
used
Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Gewindelänge: 130 mm Min. pitch: 0.4 mm Max. pitch: 4 mm Min. roll die diameter: 100 mm Max. roll die diameter: 148 mm Roll bore diameter: 54 mm Roller pressure infinitely adjustable: 17 to Roll axis swivel for thru-feed: 8 ° Roll and pause time infinitely variable: 1 - 30 sec Shaft distance: min.: 120 mm max: 200 mm Feeds: stepless up to: 1.4 mm/s Roll speeds: stepless up to: 280 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 2141 kg Weight total installation approx.: 2401 kg Overall dimensions machine: Length: 1250 mm Width: 1200 mm Height: 1260 mm Space requirement of the electrical box: 800 x 500 mm Various accessories: Set of thread rolls
used
Hydr. Pipe expanding machine Fabr. IBP Pedrazzoli Fabr. Stern Brown 65Year 1984Pressure force: 16 tMax. Pipe size: 300 x 1.9 mmWorking speed: 60 mm / sec.Return speed: 110 mm / sec.Max. Mandrel stroke: 190 mmDrive power: 15 hpPower connection: 380 V / 50 HzExternal dimensions L x W x H: 1800 x 1200 x 1500 mmWith- 10 sets of tools 160 - 300 mm- separate control cabinet with controlsxa0xa0xa0 On / off, vise open / close, head back / forth,xa0xa0xa0 Pause / Emergency- FootswitchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free ...
used
Vacuum Filling Machine / Sausage Filling Machine / Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and turning off all intestinal types. Particularly fry-friendly filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and pause length infinitely selectable Level indicator, piece counter, quantity shutdown Portioning range 5 - 10,000 g Portioning speed up to 700 servings/min. Clipper connector on the back filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs unique hygiene design modern drive concept minimum energy consumption 12" Touch Screen Control ...
used
The machine is completely factory refurbished with a 1 year warranty. Delivery, installation, samples and training included in the price. Vacuum Pump Buch. Pulsating vacuum. Setting programs with work/pause and stepless smooth adjustment of the revolutions of the receiving hopper.
used
Used Inject Star HS L750 vacuum tumbler is completely made of stainless steel. The vacuum tumblers are used in meat processing plants for marinating and massaging of muscles and red meat elements, poultry elements or seafood. This vacuum tumbler has two drive-out drums. The device has the ability to adjust the speed of the drum and the direction of rotation, run time and pause. Set dimensions: L:1800 x W:1300 x H1900mm Drum capacity: 750l Batch capacity: around 400 kg Power: 3.3kW Set weight: 760kg
used
Vacuum Filling Machine / Sausage Filling Machine / Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 220 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and turning off all types of casing. Particularly gentle filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and pause length infinitely variable selectable Level indicator, piece counter, quantity cut-off Portioning range 5 - 10,000 g Portioning speed up to 450 portions/min. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs unique hygienic design modern drive concept minimal energy consumption 12" touch screen control extremely quiet and quiet ope ...
used
TYPE: AR80S Container size: 80 liters with electric lifting device Control system: Digital control with the following functions: 10 infinitely variable speeds Timer Up/down operation (boiler) Pause button Accessories incl. Mechanical lift for the boiler Made entirely of chrome steel Machine in very good condition,
used
Siat HSD 312 - S Semi-Automatic Plate Winding Machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter:1500 mm Adjustable rotation speed of the turntable Motorized foil pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Winding programs Program 1: Double wrapping with raising and lowering of the film trolley Program 2: Double wrapping with lifting – pause to attach the top cover of the pallet – and lowering the film trolley Program 3: Easy wrapping with just lifting the foil trolley Program 4: Easy wrapping with lifting of the foil trolley and pause to attach the top cover More items - new and used - can be found in our shop! International shipping costs on request!
used
Mark Two in great condition, like new with the following accessories:, Equipment:, 2x Onyx FFF filament - 800 cm³ spool, 3x Precise PLA FFF filament - 600 cm³ spool, 1x cleaning stick Precise PLA (desktop and X series), 1x carbon fiber CFF filament - 50 cm³ spool, 1x Kevlar CFF filament - 50 cm³ spool, 1x fiberglass CFF filament - 50 cm³ spool, 1x HSHT fiberglass CFF filament - 50 cm³ spool, 1x dry box for material storage Compact (desktop and X series), Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass) ...
used
Feed infinitely variable: 0.5-6mm/s, max. rollable workpiece diameter: 110mm, rolling time infinitely variable: 0.1-99.9s, max. thread length in recess: 180mm, pause time infinitely variable: 0.1-99.9s, max. thread length in throughfeed: 5000mm, rolling spindle speed infinitely variable: 20-80/min, max. pitch of thread to be rolled: 6mm, diameter of rolling spindles: 69.85mm, max. pitch for serrations: 2mm, pitch for serrations: 2mm, mounting length of the rolling spindles: 180mm (up to 70kg/mm² strength of the material to be rolled), width of the feather key in the rolling spindle: 12.7mm, height of the feather key over the rolling spindle: 2.5mm, rolling spindle distance: 130-270mm, stroke of the rolling spindle carriage: 30mm, max. diameter of rolling tools: 218mm, swivel angle of rolling spindles: +/-10°, machine bed height: 850mm, rolling spindle height above machine bed: 200mm, h ...
used
Sausage filler Frey Kompakta 2-30, K2-30, 30 litres, 400 V, 3.7 kW, 16 A, very good condition!, BJ 14, electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, complete Stainless steel, speed, speed and pause length infinitely selectable, Level indicator, piece counter, number of pieces switch-off, portioning range 5 – 10,000 g, Portioning speed up to 250 portions/min., with accessories Filling tubes 12,14,18,20,24,30,42,46 mm, 1x for 99 mm cans Dimensions 60x80x110 cm, original price 32900,00 €