Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition
Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition
Key data: 800 mm
Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...
Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included
PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes
Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...
Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.
Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.
Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition
saw-blade dia.: tba mm Cutting height: tba mm Motor output: tba kW Control: tba Optimizing cross-cut saw Paul type 17 AP for the automatic cutting to length and optimizing of solid wood according to specified lengths and error detection. The machine increases material yield and efficiency through computer-controlled cutting sequences and is ideal for sawmills and wood processing companies with series production. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paul Double Edger KM2, good condition, 9.6 kW, 590 mm cutting length, 80 mm cutting heightPrices subject to change, errors, printing and typesetting errors excepted
Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,
Manufacturer: Paul Mehrblattsäge K34G 800 , Type: K 34, Year: 2000, Arbeitsbreite min-max.mm: 800, Arbeitshöhe min-max.mm: 40, Saw Blade Diameter mm: 300, Working hight mm: ca.40, revlutions saw spindle rpm: 6000, Movable saws: no, Power engine kW: 30, Power feeding kW: ca.4, Feeding speed max m/min: 10-25, Splinter protection: yes, Feeding by vacuum lifter: mit Abschieber, Abstapeln mit : Rollenbahn, FREE TEXT: inkl.Ersatzsägewellen ca.8 Stück, Year :2000
Manufacturer: Paul, Type: Sägewelle, Cutting widht mm: 1500, Diameter saw spindle mm: 100,
Manufacturer: Paul, Type: K34 O/800 GL, Year: 2016, Alignment laser: 25 mW, Arbeitsbreite min-max.mm: 450, Arbeitshöhe min-max.mm: 26 - 52, Min.-max. working length in mm: 480 - 1.600, Saw Blade Diameter mm: 240, Working hight mm: 1.350, Cutting widht mm: 800, revlutions saw spindle rpm: 4.500, Diameter saw spindle mm: 60, Power engine kW: 75, Feeding speed max m/min: stufenlos, Inlet transport mm: 715, Year :2016
Manufacturer: Paul, Type: K 34 M, Year: 1998, Arbeitsbreite min-max.mm: 1300, Arbeitshöhe min-max.mm: 40, Min.-max. working length in mm: 80, Saw Blade Diameter mm: 300, Tool adaption system: 30 Sägewelle, revlutions saw spindle rpm: 4500, Max. throughput width mm: 1500, Chipper: möglich, Power per saw kW: 4 X 4, Power feeding kW: 5,5, Feeding speed max m/min: 5-25, Positioning above axes: yes, Splinter protection: yes, Feeding system: Walzen, Year :1998
Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999
Manufacturer: Paul, Bauyeshr : 1989, Type: 12 MKE, Steuerung : Maxi X 3, Cutting depth mm: 44 - 150, Working hight mm: 19 - 75, Schnittgeschwindigkeit Frequenzgeregelt: yes, Work piece length max mm: 6500, Kw Leistung Sägemotor: 7,5, wood lenght max mm: 3000, Aufgabestationen: yes, Abfallförderband: yes, Saw Blade Diameter mm: 550, Optimisation: yes, Year :1989
