pasteurization used for sale

Overview The machine was built in 2007 by Spanish company Seppelec. The machine is still assembled but not in use since the factory closed the production. Before decommissioning, the machine was intensively maintained and tested with phosphorescent material.   Techn. Details Capacity: 13,500 l/ h Pressure to prevent degassing: 7 bar Temperature while pasteurizing: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control: Siemens S7-300 Cpu 314 2dp Communication port type: Profibus

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

Continuous Juice Pasteurizer Pasteurization Plant Pasteurizer 8500 ltr/h used heat pasteurize pasteurize cool juice durable make flow heater continuous paste sterilizer used. The pasteurizer plant was used for pasteurizing and cooling back drinks and apple juice. Manufacturer: Anlagenbau AG Worb Power approx. 8500 liters per hour Built c. 2001 0.6 m2 / 117 kW / max. 120 °C Including: - Pipe heat exchanger/tube heat exchanger and plate heat exchanger - 1x stainless steel tank with lateral rubging agitator - 1x pump type R905-2W - 1x stainless steel coolant compensating tank Odenwald Y.O.M. 1992, volume 112 liters. - Buffer tank - 3x Alpha Laval centrifugal pumps, type LKH114155 (11 kW) & type LKH113555 (7.5 kW). - Stainless steel switching/control cabinet Room requirement complete system approx. 6000 x 4400 x 3700 mm The plant has already been dismantled and  ...

Used whey centrifugation and pasteurization line. Line composition: Hermetic self-cleaning centrifuge, type REDA RE150T, capacity 15,000 l/h; Pasteurization module, type Alfa Laval, year of manufacture 1998. Centrifuge serviced, last service on February 16, 2022 with operating hours counter 12907.

Overview The chamber pasteurizer has 2 chambers and was manufactured in 2007 by German company JS Maschinen GbR. It pasteurizes by spraying hot water on the product. Techn. Data Capacity by rack: 1200 bottles of 33cl longneck 1450 bottles of 25cl 800 bottles of 75cl classic Each pasteurization chamber is equipped with 4 water spray bars with nozzles Each pasteurization chamber is equipped with a water tank (under and behind the chamber), a pump and a resistor Cycle time: approx.. 2h, depending on the temperatures of the chosen program Outlet temperature is 40°C Heaters from 2014 Probs from 2023 Pump garniture from 2022 Weight: 1200 kg Spare parts available

Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...

Used Syrup Room 15 000 Lt h PROGECO 2003 This is a used Syrup Room from PROGECO a well known manufacturer in the industry The model is SS 450 and was manufactured in 2003 It has a speed of 15000 liters per hour making it a suitable option for high volume syrup production Currently the Syrup Room is in a ready to operate state and comes equipped with necessary safety features to ensure secure operations Additionally manuals are provided to facilitate easy installation and maintenance The Syrup Room runs on V 380 kW 37 and Hz 50 electrical data making it a reliable option for powering large scale syrup production operations With its high speed capacity and reliable performance this used Syrup Room from PROGECO is an ideal solution for any syrup production facility Technical Data 4000 liter agitator sugar dissolving tank dissolution exchanger plate heat exchanger for 12 000 liters for heat  ...

Used processing and filling bottling line for juice glass bottles bag in box 900 L h 1 Introduction to the Washing Grinding and Pressing Line The Filling line for Juice bottling line begins with the washing grinding and pressing phase The JK400 Tipper Box Pallet is essential in the Filling line for Juice for the efficient transport of raw materials while the JP600 Washing Machine ensures thorough cleaning The JT 1500 400 inspection strip allows for quality control of the fruit before grinding The JM6000 Fruit Mill equipped with an elevator system is crucial for the effective grinding of fruits 2 From Grinding to Pressing The next step involves the Gamma 80 Pump with screw and casing which transports the pulp from the mill to the press The EBP 650 Single Track Press is designed for optimal juice extraction The 100 L press juice tank with filter and level switch ensures efficient collectio ...

Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting edge solution in the liquid thermal treatment sector This machine meticulously designed by UDMACHINES is a model PAS 10000 45 2P E It s distinguished by its operational efficiency and precision setting a new standard in the industry Key Characteristics UDMACHINES known for their innovation manufactured this Used Flash Pasteurizer in 2022 making it a relatively new addition to the market Importantly it boasts a remarkable operational capacity of 10 000 liters per hour This capacity is a testament to its significant efficiency especially in handling large volumes for treatment Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method a critical feature Specifically it rapidly heats liquids to 90 C This process is not ...

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Used milk pasteuriser Brand: GEA Ahlborn Type: VT 40 capacity: 6.000 l / h Pasteurization: 8 ° C-> 115 ° C

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Autoclave TANK, Type: 340E -New- The autoclave was only used for 5 cookings at our customer's site. Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilization, pasteurization and preservation. - Completely made of high-quality stainless steel - All safety equipment (latest requirement of the Pressure Vessel Ordinance) - All. Safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain tap, safety outlet tap, etc. - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully autom. Control by F-value controller - Fully autom. Control of operating temperature, core temperature, preselection and operating time clock - Content: 340 liters - Double jacket heating via built-in steam generator - Heating type: Electric, 27 kW, ...

The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Complete farm dairy for filling milk, yoghurt and butter with fully automatic fillers for gable boxes with screw caps and 95mm yoghurt pots Machines were completely overhauled a few years ago and are in very good condition. Included are: - Milk pasteurizer 1000 liters/h (continuous pasteurizer 93% Heat recovery) including pumps, controls, temperature recording - Homogenizer 1000 liters/h - Centrifuge 1000 liters/h - 2x coolable buffer tanks (whole milk, low-fat milk) - Nimco 550 milk filler with screw cap applicator. Output max. 2500 packs/h, currently set to 1500 packs/h - Cream / yoghurt pasteurizer 300 liters/h (continuous pasteurizer) with Electric heating including pumps, controls, temperature recording - Homogenizer 300 liters/h - Buffer tank 600 liters - 2x yoghurt tanks 600 liters double jacket heatable and coolable - yoghurt pump (worm pump) - Yoghurt filler ...

BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy productsetc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE

OBTAINING LIQUIDITY - LEASING / HIRE-PURCHASE POSSIBLE ASK FOR AN INDIVIDUAL NON-BINDING OFFER! LEASING POSSIBLE FROM 674,-€ This is a NEW blast chiller / blast freezer from the manufacturer Irinox, type MF 100.1. This is a device for blast cooling/blast freezing hot food or unprocessed foods. A sturdy stainless steel entry ramp for the trolley. The system is an exhibit of a trade fair, still unused. The external refrigeration unit UC100 is still in its original packaging and is new. The cell may show minimal signs of use due to transport. The RRP for the MF 100.1 including the refrigeration unit is: € 51,592 net. + VAT. IMMEDIATELY AVAILABLE FROM STOCK ! OUR USED EQUIPMENT SERVICE FOR YOU: - 12 months warranty by Irinox - High-quality branded devices at fair prices - Professional and competent advice - before and after the purchase - Shipment or self-collection ...

Telme Coremix 60 pasteurizer Serial: 3156 2007, Coremix 60 is an automatic pasteurizer for low and high pasteurization using a special thermoconductor liquid for indirect thermal treatments, mix per cycle 60l, 9Kw, mobile

Lot consisting of n. 1 complete line of washing, selection, pasteurization, cooking of leafy plant products. The line is currently active and consists of the following machines: - n.1 horizontal cloth conveyor belt brand CFR, model TR.P.SA/70, serial number OR.154, year 2005 ; - n.1 drum sand trap brand Zacmi, model 1120-S-180/9, serial number 1120-S-180/9, year 1995 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number TRAS-ORI-233, year 1995 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number 0231, year 1992; - n.1 vibrating conveyor belt, brand Key Technology, model MVISP 4306797, serial number 103132/1 ; - n.1 horizontal cloth conveyor belt brand Orogel, serial number TRAS-ORI-212, year 1995 ; - n.1 expansion chamber brand Te.Cal., serial number 1916-B, year 2011; - n.1 vibrating conveyor belt brand Best, model Vibrator 31800564,  ...

Corema Euromix120 Pasteurizer Serial: 1150 2006, The Euromix120 Pasteurizers for variable mix quantities use a special thermoconducter liquid. The pasteurization cycle is always rapid (less than 2mins) and times vary to the quantity of mix, mix per cycle 15 - 120l, mobile, 3Ph

Complete soft drink production unit for sale. We offer the following machines for sale as a package: - TLG vacuum filling machine -ALCOA capping machine -APV pasteurization equipment -GRAMEGNA shrink wrap machine -ELF EUROPE Duplex oil and water-based filling machine. The machines have not been used since 2004, we just stored them, hoping to start the activity again. The equipment is in excellent condition, only because it has not been used, so it requires maintenance. Sold as a package at this price. 1.INTERPLAST GRAMEGNA SHRINK FOILING MACHINE FOR SALE. Year of manufacture 1998. UE98069, BJ6/1998. It is in very nice condition. We havent used it since 2004, we put it aside until now, just in case we need it again. We used it in our soft drink production plant. Package size: 500×200 mm, max foil width 600 mm. Capacity 8000 pcs/h, sold together with buffer belt and con ...

COMPLETE BOTTLING LINE GLASS Speed: 18.000 bph Bottle formats: 0.25 LT | 0.5 LT | 0.75 LT | 1.0 LT Depalletizer Acmi Rasar D180 | 1991 Decrater Acmi Deinser 6 | 1993 Cap unscrewer Alcoa | 1996 Depalletizer Acmi Stratos | 1994 Bottle-Washer Simonazzi Atlantic | 1985 Bottle inspector Krones Linatronic | 1997 Saturator Premix Jaku | 1999 Rinser Sbr (Bertolaso) | 1991 Monoblock Eurostar 70.15 Isobaric | 1992 Capper Alcoa | 1996 Labeller Krones Prontomatic | 1991 Ink-Jet Videojet Cicrespi | 2009 Crate washer Bohrer | 1999 Case packer Acmi | 1996 Palletizer Acmi Rasar P 130 | 1991 Pallet wrapper Borbinder Peter Born Ag | 2005 Labeller Bancale Bornbinder Peter Born Ag | 2005 Case packer Dimac Starwrap R25 | 1986 (Circa) Ink-jet printer Tradex | 2014 Pasteurization plant | 1997 Air compressor Atlas Copco GA 45 | 1991 Air compressor Atlas Copco GA 37 | 2010

In a highly competitive and ever evolving sector such as bottling and packaging having high quality equipment is crucial to ensuring efficiency and precision One of the bottling lines that has proven to offer these qualities is the complete Doypack pouches line with a capacity of 600 kg h In addition this machine could be described as approximately brand new as it has been used for only 1 000 hours to produce 5 million pouches With an operating speed of 600 Kg h this line is optimized for pouch containers and has a format capacity of 100g This makes it ideal for a wide range of products including dairy products juices ready to drink creams and sauces One of its distinctive features is the weight based filling type thus ensuring that each bag contains the exact amount of product The efficiency of the line is further enhanced by key components from renowned manufacturers Tetra Pak Contherm ...

Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...

Used Eurostar Canning Line up to 3000 cph Technical Analysis The Used Eurostar Canning Line up to 3000 cph is an industrial grade bottling machinery that offers advanced performance and functionality for companies in the beverage industry Production Speed of the Used Eurostar canning line up to 3000 cph The Used Eurostar Canning Line is capable of operating at an impressive speed of 3000 bottles per hour BPH This high speed makes it ideal for large scale bottling operations Type of Containers Supported This machine is designed exclusively for can bottling making it highly specialized for this application Can Formats supported by the Used Eurostar canning line up to 3000 cph Versatility is a strong point of this bottling line as it can handle a wide range of can sizes including 0 20 L 0 25 L 0 33 L and 0 44 L cans plus 0 15 L slim sizes can also be added if necessary This flexibility allo ...

consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel, Additional title: pasteurization, Capacity: 100 hl/h, Perm. working overpressure: 16 bar test pressure 20,8 bar, Wärmeaustauschfläche: 21 m2, Length: 5,6 m, Width: 2 m, Height: 2,4 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

STEPHAN double body mixer with vacuum. 600 liters capacity Description The STEPHAN Vacutherm system is a compact process unit. It has been designed primarily for the production of prepared foods. Several steps of the process are combined in one machine. The processing of liquid and solid ingredients can be done, as well as the incorporation of particles. The STEPHAN Vacutherm system has been developed and optimized with the collaboration of prepared food manufacturers. Precisely controlled processes result in high quality and product repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in one machine. These are mixing, dispersion, size reduction, heating, cooling, pasteurization, deaeration and emulsion. The processing of liquid and solid ingredients can be performed, as well as the incorporation of particle ...

box pasteurizer for the simultaneous pasteurization of four pallets, with temperature control and timer, Additional title: 4 pallets, Steam consumption: 250 kg/batch, Length: ca. 4,0 m, Width: ca. 1,5 m, Height: ca. 2,3 m, Features: control cabinet with temperature control and timer ventilators, folding door, various connections

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency Comprising a range of top tier components the Complete Bottling Line KRONES ensures seamless performance effectively meeting the stringent demands of high volume production Main Components Firstly the KRONES K 131 669 filling monoblock manufactured in 2016 stands as the centerpiece of the Complete Bottling Line KRONES Capable of handling a remarkable 20000 bottles per hour it is complemented by the 1998 KRONES 472 072 depalletizer and the 2000 Gronemeyer RINSER 8983 400 4 Consequently this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES Quality Control ...

pasteurization plant

- Model No.: 30104-12658 - Capacity: 8,000l/h - Product: Grape juice/fruit juice - Number of sections: 4 - Inlet temperature: +4°C - Pasteurization temperature: + 95°C - Outlet temperature: +15°C - Heating: Superheated water: 105°C / 13 m3/h - Cooling: Cold water 13°C / 15m3/h - Dimensions: (L x W x H) 2000 x 670 x 1850 mm - Device in good condition

Continuous tunnel pasteurizer, make Steiner, type TP 900/5000, year 2012, for continuous pasteurization of e.g. jam in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Overview    The Alfa Laval Flexitherm flash pasteurizer was used in a Croatian brewery. As the bottling project is finished, the pasteurizer is for sale now. Last use was in December 2023.  Tech. Details  Capacity: 25 - 50 hl/ h  CO2 content max: 5,5 g/l  Inlet temperature: 5 – 15 °C  Pasteurization temperature: 72 °C  PU effect (selectable): 30PU  PHE regenerative effect: 90%  Outlet temperature: 2°C