parts used for sale

Sale of an oil cooler Daikin AKZ-149-C, this comes from a warehouse dissolution and looks as good as new. Type: AKZ Cooling capacity: 1.3 kW (50 Hz) / 1.4 kW (60 Hz) Additional options: C CE compliant electric 200 V AC / 50 Hz 0.90 kW / 3.9 A Connection- 200 V AC / 60 Hz 0.91 kW / 3.6 A data: 220 V AC / 60 Hz 0.91 kW / 3.5 A Coolant: R410A Application range: 5 – 45 °C Dimensions (H x W x D): 650 mm x 360 mm x 440 mm Weight: 51 kg Sound level: 62 dB(A) Inlet connection: Rc 3/4 Outlet connector: Rc 3/4

Max. batch weight: 100kg, heating output: 59kW, with documentation, was maintained regularly, an inspection is possible.

Load capacity: 100kg, weight 1760kg, layer use: 1-layer. EURO standard baskets can be used: Length/width/height: 600mm/400mm/288mm. Spray cleaning and flood cleaning possible.

Length: 1400mm, width: 1300mm, height: 1300mm, weight: 120kg, an inspection on site is possible.

Length: 2400mm, width: 2000mm, height: 2800mm, weight: 1.65t, an inspection on site is possible.

Partial cleaning machine used in the production of machines. Max. Current consumption: 134.7A, total connected load: 78.4kW. Additional descaling system, 4 trolleys for loading and 2 spare pumps. Documentation available.

Siemens S7 - ET 200 SP 6ES7512-1DK01-0AB0 CP 1512 NEW PART Was delivered to us incorrectly.

Communication module CM 1241 6ES7241-1CH32-0XB0 CM 1241 RS422/485 NEW GOODS - unopened Was delivered incorrectly.

dimensions 820x540x70 capacity 1 to daylight 2337 mm

max opening: 200 mm

2 Sibre TE 630/1250/60 Retail sale possible

2 Sibre SBH 500/1250/60 Retail sale possible

Syringe pump Altek Hydraulic motor OMR50 Spray pressure 1 -10 bar Storage pressure 4 6 bar 4 pick-up points with rubber buffer

Used Ultimax 3 tft monitors with frame (see pictures)

Spare part, pressure ring set GRACO (WALTHER PILOT) 76106039001 61.8 x 84.7 x 6.2 mm compression ring set consists of two pressure rings ! New ! Dimensions (set): 85 x 85 x 14 mm

Pipe bending tool, 6-piece PAGUS Ø 32 mm 1x GR 11/2 ( inches ) Dimensions: 205 x 110 x 82 mm 1x GR 1 ( inches ) Dimensions: 145 x 98 x 82 mm 1x GR 3/4 ( inches ) Dimensions: 118 x 90 x 82 mm 1x GR 1/2 ( inches ) Dimensions: 103 x 90 x 82 mm 1x GR 42 ( Ø 42 mm ) Dimensions: 247 x 100 x 82 mm 1x GR 20 ( Ø 20 mm ) Dimensions: 130 x 90 x 55 mm mount ( machine side ): Ø 32 mm, length: 82 / 55 mm used, tested ! Dimensions ( packaging ): 400 x 190 x 150 mm

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2018 Extras: Ultra-fine filters Draining pump Oil separator More items - new and used - can be found in our shop! International shipping costs on request!

New Work Machine Cabin Manufacturer: NTcab External dimensions: 130x140x170cm LxWxH Curb weight: 1016 kg The cabin is therefore new and very versatilely equipped.

Axle set with hydraulic motors Rexroth MNR R921811314 Hydraulic radial piston motor Rexroth 2 pcs Model Rexroth MNR: R921811314 CNR:- TYP: MCR5F470F180Z32B4M2WL 12SP SN: 1938362 FD: 12W40 7481 Made in the United Kingdom Shipping weight - 221 kg

Unused and not yet fully assembled two-chamber industrial washing machine, is offered very far below original price! Technical data according to manufacturer's specifications: Dimensions Width = 3278 mm Height = 3350 mm Depth = 3924 mm Weights Total weight = 6500 kg Ab. Gross batch mass = 500 kg Required floor load capacity = 1500 kg/m² Washing medium Operating medium = demineralized water Water connection = 4 bar, 3/4", cold Working temperature range = 10 -70°C, adjustable Flood pumps = 2 centrifugal pumps, flow rate per pump approx. 2 mn³/min, connected load per 4 kW Water Quantity Washing Process Chamber 1 = 3.9 m³ Water level measured from above Water level chamber 1 = max. 250mm, nominal 100-200 mm, min. 50 mm Heating Heating basin = 10 cartridge heaters, electric Total connected load = 85 kW Nominal voltage = 3 x 400 V AC~ PEN Control volta ...

unknow A9020411 (12-14)-

Operator Panel

Cutler Hammer Panel Mate Power Pro PGGLOBL1701DPRO 1785T 91-01759-04 Dimensions approx. 26.5 cm Wide, 19.5 cm high and 10.5 cm deep Shipping : 7,90 with Hermes VAT not deductible

Type: RS 160 - center height: 140 mm - spindle thru-hole: 40 mm - alowable work diameter: 160 mm

MCM00B0-SMLT Micro Design

BU62-60-30-B-003 built-in rectifier device BUS21-30/60-30-001

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Welding current transmission Bum with counter bearing and SEW Eurodrive drive + Braking resistance Frequency converter is missing VAT not deductible Shipping possible

Continuous cleaning system - 2-bath facility (1st bath pre-wash, 2nd bath rinse) - Max. basket weight 80 kg - Distillation capacity approx.: 110l/hUltrasonic unit - Heating capacity : 13,2KW - Solvent content approx. 230 l Dimensions WxDxH 2600 x 2785 x 2340 mm

Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Control CNC 432 Ref. 4022 226 4280 D 004594

Inv. Num. : 7060 Type: Vaiocs-1 Producer: EMO Created: 1998 Parameters: Control system: SIEMENS SIMATIC Tank dimensions: 530 x 320 x 200 mm Machine dimensions: 4950 x 4170 x 2310 mm

Description: Manufacturer number: 42099 Operating voltage: 230 V Frequency: 50 Hz Connection: 18 kW Rated current: 0.2 A Filling capacity: 50 L weight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 630 x 600 x 1,200 mm

Description: Serial number: 866070619 Operating voltage: 400 V Frequency: 50 Hz Connection: 16.3 kW Rated current: 31.8 A weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 780 x 750 x 1,600 mm

Description: Dimensions of the washbasin: 650 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 900 mm, weight approx.: 200 kg

Description: Contents consisting of springs, pipe clamps, countersinks, vacuum accessories, deburring tool and various small Lots Approx. Onsite Dimension. (l x w x h): 400 x 300 x 1,200 mm, weight approx.: 70 kg

Description: Content consisting of various indexable inserts, mostly from the manufacturer INGERSOLL and WALTER Approx. Onsite Dimension. (l x w x h): 400 x 250 x 470 mm, weight approx.: 50 kg

Description: Content consisting of various indexable inserts, mostly from the manufacturer SANDVIK, as well as various boring inserts Approx. Onsite Dimension. (l x w x h): 400 x 250 x 470 mm, weight approx.: 50 kg

High-pressure washbasin with viewing window for manual and environmentally friendly use based on aqueous cleaners. Bsduoi7jo8 Specifications: Usable area / work surface: 1,200 x 700 mm Usable height: 400 mm Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt /min Washing temperature: adjustable up to max. 45°C Fuel tank capacity: 170 lt Heating power: 4,000 W Total power: 8.0 KW Voltage: 400 V 3 Ph+N Frequency: 50 Hz Total weight: 180 kg Dimensions of the brush washbasin 1,480 x 991 x 2,080 mm (with the lid open)

Platform load: 350 kg/m² Year of construction: 2005 Location: Cologne