british flag
Resale Logo

parts used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords parts > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121068158 1300

MEMBRAIN NF/RO for sale
Reverse Osmosis System


Number of components: 4, membrane surface: 1098m², output: 19000l/h, membranes: DOW RO 3838, connected load: 170kW, spare parts: 2 x stage pumps, 1 x pressure booster pump, 47 x DOW RO 3838 membranes.
used machine
 
Number of components: 4, membrane surface: 1098m², output: 19000l/h, membranes: DOW RO 3838, connected load: 170kW, spare parts: 2 x stage pumps, 1 x pressure booster pump, 47 x DOW RO 3838 membranes.
1996
Price  
  DE   request
121068154 1300

MOC DANNER KR 200 for sale
Cleaning machine


Machine dimensuons: 140 x160 x 200 cm. Parts case dimensions: 520 x 320 x 200 mm
used machine
 
Machine dimensuons: 140 x160 x 200 cm.
Parts case dimensions: 520 x 320 x 200 mm
1995
12,000 €  
  SI   request
121063126 1102  

JENBACHER JMS320 GS-N.LC for sale
Engines


COGENERATION ENGINE: JENBACHER JMS320 GS - N.LC YEAR OF MANUFACTURE: 2008 OUTPUT: 1063kW / 400V / 50 Hz HOURS: 18220 ALTERNATOR: STAMFORD OUTPUT: 1156kW / 1445kVA / 400V AC 3 Phase The following are integral parts  ...
used machine
 
COGENERATION ENGINE: JENBACHER JMS320 GS - N.LC
YEAR OF MANUFACTURE: 2008
OUTPUT: 1063kW / 400V / 50 Hz
HOURS: 18220
ALTERNATOR: STAMFORD
OUTPUT: 1156kW / 1445kVA / 400V AC 3 Phase
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
• Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer

2008
Price  
  ES   request
121061715 101

DS ALPHA 800 S for sale
Modular Machining Centre


X-travel: 1600mm, y-travel: 1250mm, z-travel: 1300mm, B-travel: 360°, number of pallet stations: 2, pallet size: 1000x1000mm, centric infeed: 3t max., collision circle diameter: 1700mm, drive power: 45kW, torque: 1700Nm ...
used machine
 
X-travel: 1600mm, y-travel: 1250mm, z-travel: 1300mm, B-travel: 360°, number of pallet stations: 2, pallet size: 1000x1000mm, centric infeed: 3t max., collision circle diameter: 1700mm, drive power: 45kW, torque: 1700Nm, rotational speed: 4000/min, tool fitting force: 24000N, acceleration: 2m/s², speed: 30m/min, rapid traverse B-travel: 16/min, feed force x- and y-travel/ z-travel: 15/ 20kN, magazine slots: 230, tool length: 700mm, tool diameter: 300mm, tool weight: 40kg, including various spare parts, available after March/ April 2018.
2005
Price  
  DE   request
121061640 410

CHROTEC for sale
Sack up plug


-Automatic sack up plug Chrotec -Part of a filling line Chrotec K 4 E -Additional equipment available on request -Documentation, schematics available -Plant until the dismantling was in operation in 2011 -2002 the c ...
used machine
 
-Automatic sack up plug Chrotec
-Part of a filling line Chrotec K 4 E
-Additional equipment available on request
-Documentation, schematics available
-Plant until the dismantling was in operation in 2011
-2002 the complete system has been overhauled and fitted with a Siemens S7 control
 
Price  
    request
121053340 2500

ENERPAC RC 1006 for sale
hydraulic cylinder Enerpac RC 1006


will be offered: 1 piece ENERPAC hydraulic cylinders RC 1006, 100 t Brand: ENERPAC Type: RC 1006 new, lightweight storage stocks Features: 90zhk3lxs Single-acting cylinder series RC. The exclusiv ...

 
will be offered:

1 piece

ENERPAC hydraulic cylinders RC 1006, 100 t

Brand: ENERPAC

Type: RC 1006

new, lightweight storage stocks

Features:
90zhk3lxs

Single-acting cylinder series RC.

The exclusive golden ring design absorbs eccentric loads, without wear out the cylinder parts

Designed for use in all situations

Made from high-strength alloy steel

Powerful return spring

Design by baked for increased corrosion protection

All models have a CR-400 coupler socket with dust cap

The scraper Removes contaminants from the piston and extends the service life of the cylinder.

Lifting capacity: 100 t

Stroke: 168 mm

For more information:

Retracted height: 357 mm

Max bar operating pressure: 700 bar

Operating pressure maximum PSI: 10000 PSI

Diameter outside: 177 mm

Diameter inside: 130.3 mm

single / double acting: acting

Weight: 53 kg

Lifting force kN: 101 kN

Piston surface area cm2: 133.3 cm²

Material: Steel

Oil volume cm ³: 2239 cc

Effective piston surface: 133.3 cm²

Shipping:

free shipped from stock

-For more shipping details / shipping within Germany and around the world please take up contact with us
-Pickup
 
1,100 €  
    request
121050500 702

STEPHAN Combicut TC 850 for sale
Blender


Stephan Combicut TC 850. This Stephan came out of Nestle chocolate facility Stainless electrical control panel Spare parts for this Stephan blender All attachments Vacuum pump: LEMA 125 Double Jacket Voltage:  ...

 
Stephan Combicut TC 850.
This Stephan came out of Nestle chocolate facility


Stainless electrical control panel
Spare parts for this Stephan blender
All attachments
Vacuum pump: LEMA 125
Double Jacket
Voltage: 600volts / 60 Hz / 3phase
Batch size: 300- 580 kilos
Good working condition.

 
45,000 USD  
  CA   request
121048026 1102  

DEUTZ - MWM TBG620 V12K for sale
Engines


COGENERATION ENGINE: DEUTZ - MWM TBG620 V12K OUTPUT: 1050kW YEAR OF MANUFACTURING: 1995 GENERATOR: STAMFORD Year of manufacturing: 1995 OUTPUT: 1057kW / 1322kVA 50 Hz VOLTAGE: 400V The following are integral parts ...
used machine
 
COGENERATION ENGINE: DEUTZ - MWM TBG620 V12K
OUTPUT: 1050kW
YEAR OF MANUFACTURING: 1995
GENERATOR: STAMFORD
Year of manufacturing: 1995
OUTPUT: 1057kW / 1322kVA 50 Hz
VOLTAGE: 400V
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer
1995
Price  
  ES   request
121047911 1102

JENBACHER JMS 616 for sale
Gas engines


COGENERATION ENGINE: JENBACHER JMS 616E GS - N/B. L (C) OUTPUT:1942 KW YEAR OF MANUFACTURING: 1999 GENERATOR: STAMFORD YEAR OF MANUFACTURING: 1999 OUTPUT: 2700kVA / 2160kW VOLTAGE: 690V / 50 Hz The following are i ...
used machine
 
COGENERATION ENGINE: JENBACHER JMS 616E GS - N/B. L (C)
OUTPUT:1942 KW
YEAR OF MANUFACTURING: 1999
GENERATOR: STAMFORD
YEAR OF MANUFACTURING: 1999
OUTPUT: 2700kVA / 2160kW
VOLTAGE: 690V / 50 Hz
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer and and-pype
1999
Price  
  ES   request
121039275 103

EMCO FB 6 for sale
CNC Universal Milling Machines


Universal Werkzeugfräs.- and drilling machine EMCO FB-6 TNC310 Traverse path x/Y/Z: 700/500/500 mm Solid angle table Lxw: 900 x 500 mm infinitely variable spindle speeds from 10 - 3150 RPM Motor power: 7kW hydr ...
used machine
 
Universal Werkzeugfräs.- and drilling machine EMCO FB-6 TNC310

Traverse path x/Y/Z: 700/500/500 mm
Solid angle table Lxw: 900 x 500 mm

infinitely variable spindle speeds from 10 - 3150 RPM
Motor power: 7kW
hydraulic tool clamping DIN 69871/SK40

Feed X/y axis: 1-5000 mm / min (stepless)
Feed Z-axis: 0.5-2500 mm / min (stepless)

Rapid feed x/y axis: 5000 mm / min (stepless)
Rapid feed Z axis: 2500 mm / min (stepless)

Control: HEIDENHAIN TNC 310 (Web control)
electronic handwheel
Length measurement system in X-Y-Z axis: HEIDENHAIN LS 303 C.

Machine weight: approx. 2700 kg
Machine size T x B x H: approx. 2.20 x 2.05 x 2.35 m

Accessories:
-Coolant system
-Hydraulic tool clamping
-automatic central lubrication system
-Vertical milling head
-Chip tray
-Working space protection
-Operating instructions and spare parts list
-Machine lamp
2001
Price  
    request
121028601 1707

HP Halter für Druckköpfe for sale
Holder for DesignJet printheads


New HP - holder for printheads for Designjet 100,110,111,130, etc. HP - no. None / spare parts not immediately there are HP - stock available
new machine
 
New HP - holder for printheads for Designjet 100,110,111,130, etc.

HP - no. None / spare parts not immediately there are HP - stock available
new
88 €  
    request
121017235 1108  

MAK 9M453AK for sale
MaK 9M453AK CRANKSHAFT


1 PC MaK 9M453AK Crankshaft available for sale. WITH MEASUREMENT REPORT. WITH GEAR & COUNTERWEIGHTS Exworks Istanbul Ready for Delivery Please contact for other requirements of MaK 9M453AK Dies ...

 
1 PC MaK 9M453AK Crankshaft available for sale.

WITH MEASUREMENT REPORT.

WITH GEAR & COUNTERWEIGHTS


Exworks Istanbul
Ready for Delivery

Please contact for other requirements of MaK 9M453AK Diesel Engines.
 
Price  
  TR   request
121016271 1108  

SKL 8 VDS 29/24 AL-2 for sale
SKL 8 VDS 29/24 AL-2 CRANKSHAFT


1 PC SKL 8 VDS 29/24 AL-2 Crankshaft available for sale. STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS Exworks Istanbul Ready for Delivery Please contact for other requirements of S ...

 
1 PC SKL 8 VDS 29/24 AL-2 Crankshaft available for sale.

STANDARD MEASUREMENT WITH REPORT.

WITH GEAR & COUNTERWEIGHTS


Exworks Istanbul
Ready for Delivery

Please contact for other requirements of SKL VDS 29/24 AL-2 Diesel Engines.
 
Price  
  TR   request
121016257 1707

HP Q1273-60300 for sale
INK tubes assy for Designjet 4000-4520


New HP - ink - tubes assy (tubing) for DesignJet 4000-4520 HP - no. Q1273-60300 / new immediately ex stock available spare parts there are HP - no longer.
used machine
 
New HP - ink - tubes assy (tubing) for DesignJet 4000-4520 HP - no. Q1273-60300 / new immediately ex stock available spare parts there are HP - no longer.
2017
999 €  
    request
121000387 103

INGERSOLL 120 x 144 x 24 ft for sale
Horizontal Floor Type Milling And Boring Machines


120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and ...

 
120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210

This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and traverse movement.

The bed has a finished pad on the left-hand side so that a bedwing and outboard support can be added to the machine when required.

Capacity:
Vertical distance from table to centerline of spindle 0-144"
Length of table feed and traverse 24'
Length of quill travel from face of head 0-24"

Bed (3 ways):
Width across travel ways 112"
Overall length, approx. 52.5'

Table:
Working surface width 120"
Working surface length 24'
Overall length 26'
• Power operated lock
• Johnson Drive
• T-slots & Pin holes

Housing:
Width across housing ways 90"

Head:
• Movement on housing is made through two (2) elevating screws.
• Hand-operated locks
• Contains a quill which carries the spindle
• Spindle is driven by a 100 HP adjustable speed drive DC motor through gearing
• Flywheel on spindle drive

Spindle:
• The spindle is equipped with a No. 450 taper, 4-1/2" in diameter at the large end, ¾" diameter taper per foot

Quill:
Spindle quill diameter 22"
Power and hand adjustment 24"
• Power adjustment is independent of table and head movement
• Hand operated lock

Spindle Speeds:
Spindle speed, approx. 10-130 RPM
• The spindle has three (3) ranges of speed. Medium starts at 14 RPM, and high-speed range is full capacity of the 100 hp drive motor.

Feed Distribution:
• The machine is arranged with two (2) 2-Motor feed boxes, one for the head feed and one for the table

Feed & Traverse Rates:
Feed Rapid Traverse
Table ¾" – 36" per minute 20 ft. per min
Head ¼" – 12" per minute 8 ft. per min
• Quill is equipped with an electronic feed motor providing feed and traverse movements ranging from ¾" – 24" a minute

Full Lubrication for all areas:

Motors and Electrical Equipment:
Qty. Description
1 Main Motor 100 hp, 575/1725 RPM, 230 volts, DC, drive motor
2 Feed Motor 7-1/2 hp, 575/2300 RPM, DC
2 Head & Table Drive Motors 40 hp, AC, foot mounted traverse motors
2 Lubricating Pump Motors ½ hp, AC,
1 Quill Adjust Motor 3 hp, 1150/2300 RPM, DC, 65/2300 FPM
1 Coolant Pump Motor 2 hp
1 Table Clamp Motor 15 ft. lb., 1800 RPM, Shell type

Electrics:
• 230 volts, DC
• 440 volts, AC
• The DC motors receive DC power from a 900 kW MG Set driven by a 150 hp motor

Machine controls:
• The machine is primarily controlled via a portable pendant with the following :
1. Start and stop drive motor
2. Start, stop, reverse, jog, feed, fast feed and traverse table
3. Clamp table
4. Start, stop, reverse, jog, feed, fast feed and traverse bed
• The control cabinet mounted on the operators platform contains the following:
-Hand operated rheostats for increasing or decreasing the feed rates
-Stop and start buttons for chip conveyor, coolant pump motor and lube pump motor.

Coolant

Chip Conveyor

Net weight - 330,000 lbs


(2) Hydraulic Clamping Fixtures:
• Fixtures consists of two complete clamping units, each unit including a housing, clamping rail and supporting brackets.
• Adjustable Clamping Rail – to clamp various die block widths
• Housing is located on the table in one of two positions; one for blocks from 14" to 27" thick, and a second for blocks 27" to 40" thick
• Each fixture is equipped with pendant operated through push buttons and selector switches
Capacity – the fixture is adjustable for holding the following sizes of die blocks:
-Thickness – 14" – 40"
-Width – 36" – 90"
-Length – 58" – 21-1/2 ft.
-Electrics – 440 volt, 3 phase, 60 cycle, AC as follows:
-(1) 7-1/2" HP AC motor for adjusting crossrail
-(1) 5 HP AC motor for driving the hydraulic pump motor
-Weight – estimated weight of each fixture and its parts is 140,000 lbs
-Magnetic Clamping on each fixture as follows:
-Fixture 1 – Sundstrand magnetic Control, 480 v AC - 244 DC
-Fixture 2 – Neutrofier II Magnetic Control, 280/400 AC – 244 DC
-72" x 10" Magnetic face on each fixture
-Travel:
-Vertical travel – 64"
-Hydraulic Unit:
-Vickers

Note:
Maximum recommended weight on table is 740,000 lbs. If one fixture is used then reduce by 140,000 lbs. If two fixtures are used then reduce by 280,000 lbs.

The machine was originally designed to perform general face milling operations on die blocks.

It is currently installed under power at a NorthEast USA plant where it may be inspected on request.

We will sell the Clamping Units separately.
 
Price  
  US   request
120999983 107

TRUMPF TruPunch 5000 - 1600 FMC for sale
Punching Machines


Year of construction: 2006 Hours of operation machine: 35.281 h (20.09.2017) Work area: 3050 x 1550 mm Control: Siemens Sinumerik 840 D Max sheet thickness approx.: 8 mm Space requirement approx.: 7600 x 7000 mm App ...
used machine
 
Year of construction: 2006
Hours of operation machine: 35.281 h (20.09.2017)
Work area: 3050 x 1550 mm
Control: Siemens Sinumerik 840 D Max sheet thickness approx.: 8 mm
Space requirement approx.: 7600 x 7000 mm
Approximate weight machine: 17,300 kg
Power consumption: 29 kVA

Standard equipment
-Stable, easily accessible C-frame
-Coordinate guide with integrated linear magazine, 25 places for tools and clamps
-4 clamps
-Automatic part slide 500 x 500 mm

Punching head
-Hydraulic Mono - tool holder 360 ° rotation
for all tools, automatic tool length compensation, tool lubrication
-2 lubricant containers, programmable stripper motion, punching slug extraction
-Programmable presser to set up with a low locking force

Control
-Open based Sinumerik 840 d control system
-10.4 "TFT color display
-Diagnosis function
-Graphics programming ToPs 2000
-Integrated 3.5 "-floppy"
-RJ45 network connector

Security
-CE marking
-Multi-beam photoelectric
-Emergency shut-down hydraulic
-Bulge detection

Advanced cutting equipment
-Function multi tool
-Function Multibend
-Function thread forming
-Adaptive stroke calibration
-ASC (advanced control stripper)

Advanced machine equipment
-4 x single to öffnede clamps
-Sensor for slide of part of
-Vibration-damped installation
-Designation cylinder
-Automatic switch-off
-Conveyors
-Blowing device for small parts

Automation

SheetMaster (3000 x 1500 mm)
-Magnet cleaner
-Vakuumsensorik
-Central lubrication
-Plate thickness gauge for double sheet control
-Magnet system
-Cleaner plate module

TrumaTool 40
-TrumaTool upgrade main time parallel

SortMaster R4
-incl. 4 container
2006
Price  
    request
120999845 2301

FANUC M6i / RJ for sale
industrial robot


type mechanic: M6i type Control: RJ2 max. load: 6 kg Machine only for spareparts. No teachpendant available.
used machine
 
type mechanic: M6i
type Control: RJ2
max. load: 6 kg

Machine only for spareparts.
No teachpendant available.

1996
Price  
    request
120999829 1519

KAUP Spreader for sale
Kaup container spreader / traverse / pliers


Container clamp very good condition with 4 foldable pinball machines sections 3 and 6m Capacity approx. 6 tonnes From site Ohrdruf. Sale and mistakes reserved.

 
Container clamp
very good condition
with 4 foldable pinball machines
sections 3 and 6m
Capacity approx. 6 tonnes
From site Ohrdruf.
Sale and mistakes reserved.
 
18,000 €  
    request
120987682 106

Dango & Dienenthal MSM 1400 for sale
Hydraulic Forging Presses


This is an 85 tonne Mobile Forging Manipulator new in the early 2000's Carrying capacity 850.0 kN (85.0 t) Tongs moment 1,700.0 kNm (170.0 tm) Technical data: Manipulator Abilities: Weight load max (for hot fo ...
used machine
 
This is an 85 tonne Mobile Forging Manipulator new in the early 2000's
Carrying capacity 850.0 kN (85.0 t)
Tongs moment 1,700.0 kNm (170.0 tm)

Technical data:
Manipulator Abilities:
Weight load max (for hot forgings) 850.0 kN
Weight load nom. 700.0 kN
Load moment max (for hot forgings) 1,700.0 kNm
Load moment nom 1,400.0 kNm
Max moment for front wheel 3,443.0 kNm
Wheel Pressure with nom. load, max front wheel 4 x 65665 kg
Wheel Pressure without load, max rear wheel 2 x 61250 kg
Stability moment, approx. 8,089.0 kNm
Stability factor 2.35

Dimensions of Manipulator:
Overall Length 11.352 m
Overall Height min/max 6.731 m
Overall Width 6.42 m
Min. turning radius around the rear edge of machine 8.766 m
Total Weight (exclud. ext. arms and energy supply) 248.0 t

Parameters of tongs and rotation drive:
Max. Clamp-able circle 2000.0 mm
Max. Clamp-able square 1698.0 mm
Minimum clamp-able circle and square 446.0 mm
Opening and closing speed of tongs 130/90.0 mm/s
Turning diameter of max. Opening of tongs 3,083.0 mm
Lowest distance of tongs from rail height 1,400.0 mm
Displacement/movement distance of vertical height 2,000.0 mm
Displacement/movement speed of vertical height 100.0 mm/s
Torque of tongs 180.0 kNm
Speed tongs rotation 12 rpm
Speed of elevation and depression 1.5 ?/s
Horizontal left and right displacement/movement distance ±300.0 mm
Speed of horizontal movement 80.0 mm/s
Travelling distance of vertical hydraulic cushion/damping 200.0 mm
Clamping depth of plier 844.0 mm
Opening and closing dimensions for inserting parts with claws/extension arms 0 – 4000.0 mm

Travelling drive:
Running speed with load 60.0 m/min

Hydraulic equipment:
Working pressure of system 20 mPa
Total output power 500.0 kW
Main motor 3 x 160.0 Kw
Hydraulic oil cooling 20.0 kW
Voltage for main motor 380±10% V
Control voltage 220±10% V
Frequency 50±10% Hz

Design: ?
• The main frame is a sturdy welded steel construction of structural shapes, plates and forgings.
• The tongs carrier consists of the rotating peel supported in roller bearings, the gripping tongs mounted to the front of the rotating peel, the tongs cylinder installed in the rotating peel, and the hydraulically operated rotation gear with break.
• The piston rods of the hydraulic cylinders are ground and hard-chromium plated
• The rear wheel is driven by hydraulic motors and a transmission gear
• The high-pressure hydraulic pumps supply the pressure oil for all manipulator movements such as traveling, rotating, steering, lifting, lowering, tilting, side-shifting, opening and closing of tongs.
• Tongs clamping force is maintained by a hydraulic accumulator
• An air/oil cooler with high cooling capacity and additional oil heating system ensures adequate temperatures
• Central lubrication system: Lubrication points combined to distributors, provided for lubrication by a manually operated grease gun.
• Electric motors in I.E.C. design
• Electric motors suitable for connection to three-phase A.C. 400V, 50 Hz
• Control Voltage for 220V, 50 Hz
• Supply voltage for solenoid valves 24 V D.C.
2004
Price  
  US   request
120987669 106

KALININ PLANT KA3732 for sale
H-Frame Crank Presses


Manufacturer: Kalinin plant of forging and pressing equipment Made in: SSSR Russia Intended for production of parts from sheets using various cold stamping operations such as cutting, hole punching, bending, non-d ...
used machine
 
Manufacturer: Kalinin plant of forging and pressing equipment

Made in: SSSR Russia

Intended for production of parts from sheets using various cold stamping operations such as cutting, hole punching, bending, non-deep drawing, etc.

Specification:

Nominal force: 1600 kN

Slide stroke: 200 mm

Distance between table and slide: 630 mm

Main motor power: 17 kW

Table dimensions (WxL): 1250x2000 mm

Overall machine dimensions (LxWxH): 3550x2550x4500 mm

Weight: 29700 kg
1978
14,000 €  
  LT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter