127,339 used machines on RESALE, but how to find them? Machine Search
PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg
PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg
Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg
MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL MACHINE IS COMING FROM AEROSPACE COMPANY AND IT IS IN A VERY GOOD WORKING CONDITION Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. (1997)
Servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens servo motor with brake -Type: 1 FT5072-1AF71-4AH0 -Speed: 3000 rpm / nmax: 4800 rpm -Voltage: Ui = 367 V -Shaft: Ø 24 x 50 mm -Brake: 24V - 21.3W -Dimensions: 325/144/H175 mm -Weight: 15 kg
This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard
Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm -Weight: 151 kg
arm length: 4000 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.32 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Simatic Multi Panel with control lamp and brackets -Type: 6AV6 643-0DD01-1AX1 -Dimensions total: 700/1450/H275 mm -Weight: 44 kg
Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg
Spiral bookbinding machine Swigraph R6 257U, with various tools in Swiss quality, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machines in our house by prior appointment.
Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Simatic Touch Panel with indicator light and brackets -Type: 6AV6 643-0CD01-1AX1 -Dimensions total: 1000/210/H1100 mm -Weight: 29 kg
Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg
Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holder: SK40 holder -Inner diameter 57.5 mm -Dimensions: Ø 76 x 157 mm -Weight: 1.8 kg
Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 457 Height: 260
Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 244 Height: 260
Steam heating Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoking material: wood chips Without after-burning system Installation dimensions of the machine in cm: Width: 151 Length: 129 Height: 260
Collision protection, ram protection, shelf protection, column protection, column collision protection -Manufacturer: A-SAFE, collision protection pillar protection spacer 2 pieces -Type: R-01-01-0011 150 mm Spacer -Delivery/Price: complete -Dimensions: 230/180/H600 mm -Weight: 2.2 kg/piece
Tool holder, milling holder, milling tool -Manufacturer: Dornag Swiss, milling chuck SK40 -Inner diameter: Ø 25 mm -Dimensions: Ø 65 x 175 mm -Weight: 2.1 kg
Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg
Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Hitech, Touch Screen Panel Operator Interface Hitech 1700 -Type: PWS1720-STN -Dimensions: 205/70/H160mm -Weight: 1.4 kg
ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used
Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Simatic Touch Panel with indicator light and brackets -Type: 6AV6 647-0AA11-3AX0 -Dimensions total: 240/110/H430 mm -Weight: 5.7 kg
Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor -Type: Elmo-G 2 BH2 000-0AH02 -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 250/235/H255 mm -Weight: 8.6 kg
Mobile cultivator Starchl MK50 FEEDER 450/450 engine diesel 190hp Hours 300
power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 10 -Type: 6EP1334-1AL11 6EP1 334-1AL11 -Input: 120/230 V 50/60 Hz -Output: 24 V DC 10 A -Quantity: 1 piece available -Price: per piece -Dimensions: 220/130/H60 mm -Weight: 1.1 kg
Head Machine 6 rows Weight range approx. 70-120gr with various warp knitting drums with pre-portioner Output Weight outputs approx.: 12,000 pieces per hour TOUCH control, · for wheat doughs, mixed wheat doughs, rye mixed doughs
SLP Pallet Rack Stand Frame Height approx. 6,510 mm / Depth 1,100 mm SL20, used Properties: - From stock Krefeld - please inquire about shipping - Stand height/frame height: 6,510 mm - Stand depth/frame depth: 1,100 mm - Profile width: 100 mm - Used: very good condition Stand:: - The frames are made of two Omega profiles with their corresponding connectors, post feet and fastening materials - The horizontal and diagonal struts orange - The perforation of the Omega profile has a distance of 70 mm for holding the trusses - Powder-coated surface, RAL 5010 gentian blue The stands are already pre-assembled. Scope of delivery: - Stand 6,510 x 1,100 mm: 1 pc. Dimensions: Stand height: 6,510mm Stand depth: 1,100mm Pitch: 70mm Scope of delivery: Stand approx. 6,510 x 1,100 mm: 1pc.
SLP Pallet Rack Stand Frame Height approx. 4,620 mm / Depth 1,100 mm SL15, used Properties: - From stock Krefeld - please inquire about shipping - Stand height/frame height: 4,620 mm - Stand depth/frame depth: 1,100 mm - Profile width: 100 mm - Used: very good condition Stand:: - The frames are made of two Omega profiles with their corresponding connectors, post feet and fastening materials - The horizontal and diagonal struts orange - The perforation of the Omega profile has a distance of 70 mm for holding the trusses - Powder-coated surface, RAL 5010 gentian blue The stands are already pre-assembled. Scope of delivery: - Stand 4,620 x 1,100 mm: 1 pc. Dimensions: Stand height: 4,620mm Stand depth: 1,100mm Pitch: 70mm Scope of delivery: Stand approx. 4,620 x 1,100 mm: 1pc.
10 pieces SLP pallet rack stand frame height approx. 9,030 mm / depth 1,100 mm SL25, used Properties: - Stand height/frame height: 9,030 mm - Stand depth/frame depth: 1,100 mm - Profile width: 100 mm Stand:: - The frames are made of two Omega profiles with their corresponding connectors, post feet and fastening materials - The horizontal and diagonal struts are made of galvanized C-profile - The perforation of the Omega profile has a distance of 70 mm for holding the trusses - Powder-coated surface, RAL 5010 gentian blue - Partly with stand protection The stands are already pre-assembled. Scope of delivery: - Stand 9,030 x 1,100 mm: 10 pcs. Dimensions: Stand height: 9,030mm Stand depth: 1,100mm Pitch: 70mm Scope of delivery: Stand approx. 9,030 x 1,100 mm: 10pcs.
SLP Pallet Rack Stand Frame Height approx. 2,100 mm / Depth 1,100 mm SL20, used Properties: - Stand height/frame height: 2,100 mm - Stand depth/frame depth: 1,100 mm - Profile width: 100 mm - Used: very good condition Stand:: - The frames are made of two Omega profiles with their corresponding connectors, post feet and fastening materials - The horizontal and diagonal struts are made of galvanized C-profile - The perforation of the Omega profile has a distance of 70 mm for holding the trusses - Powder-coated surface, RAL 5010 gentian blue - Partly with stand protection The stands are already pre-assembled. Scope of delivery: - Stand 2,100 x 1,100 mm: 1 pc. Dimensions: Stand height: 2,100mm Stand depth: 1,100mm Pitch: 70mm Scope of delivery: Stand approx. 2,100 x 1,100 mm: 1pc.
KENO SLP - Drum shafts - length 885 mm - max. load 750 kg - diameter 61 mm Properties: - Drum shafts for cable drum rack - To accommodate the cable drum - Length: 885 mm - Diameter: 61 mm - Payload: 750 kg - Surface hot-dip galvanized Scope of delivery: - Drum shaft: 1 pc. Properties: Length: 885mm Diameter: 61mm Payload: 750kg Surface: hot-dip galvanized Scope of delivery: Drum shaft: 1pc.
maximum number of results exceeded
please refine your search
