parta s used for sale

Bread dough dividing machine, W & P, Parta S 2000

Bread dough cutting machine, Fabr. W & P, Type Parta U 2

Bread plant W&P Parta U CR59 The system consists of 4 machines 1x W&P Parta U dough divider 1x W&P Intermediate fermentation chamber 296 baskets 215x360cm and height 282cm 1x W&P CR59 Cone wiper 1x W&P long scooter

A used dough cradle W&P Parta U with stainless steel cladding is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP Parta U - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output: 925 to 1050 pieces - the dough divider is in baker's condition

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour. method of careful processing of the dough; two dividing chamber; low oil consumption; weight range 150-900 g or 80-750 g ; hopper volume 120 l; machine weight 820 kg ; dimensions with hopper 1127x750x1612 mm ; power 1.1 kW renovated

Bread dough dividing machine, W & P, Parta ST 1500-1000

-Dough divider weigher Manufacturer: Werner & Pfleiderer Haton BV -Type: Parta SN -400 volts -Year of construction 2001

Dough Dividing Machine Weigher Werner & Pfleiderer Model: Parta U Fully automatic dough dividing machine Range 300 to 2100 grams Conveyor belt 725 mm Central lubrication Hopper 170 ltr. Mechanical weight adjustment Stainless steel Output 925 pcs/Std. max. Machine mobile with brake Connection 400V, 1.6 kW, 16A-CEE plug Used machine cleaned 2021 Refurbished

Used dough weigher W&P, type: Parta U -completely overhauled- - W&P Parta U1 with 1 cylinder for dividing - Capacity: max. 1,500 pcs./h - Weight range: 300 - 2,800 g - Machine completely disassembled, all wear parts renewed - Condition: Very good, like new - 6 months warranty Visits and test runs are possible by arrangement.

Dough Weigher W&P, Type: Parta SN -Refurbished- - with double piston - everything completely overhauled - very good condition, as good as new - incl. 6 months warranty Visits and test runs are possible by arrangement.

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Net weight= 820 kg, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

A used dough weigher W&P Parta U2001 stainless steel is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP PartaU 2001 - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output macx. 1140 Pieces - the dough divider is in baker's condition - Year of construction 2007

Dough Divider Dough Weigher W&P PartaU 2 Chamber Overhauled - Manufacturer: Werner & Pfleiderer Haton - Model: Parta U - Dough weigher / dough divider with 2 chambers - Weight range 2 chamber: 110 grams to 1200 grams - Hourly output: 1230 to 2840 pieces - With stainless steel funnel - Completely clad in stainless steel

Dough weigher Werner &, Pfleiderer Parta UProduct descriptionManufacturer: Werner &, Pfleiderer HatonType: Parta Uused dough dividers from Werner &, Pfleiderer type Parta U with 1 chamber. The Parta U is very suitable for dough dividing for companies with higher quantities per hour.with 1 chamber Weight range: 300 grams to 2800 gramsHourly output: 925 to 1050 piecesPainted machine ( needs to be overhauled )2 pieces in stock ( photos of 2 pieces )Details see pictures.

60 x 120 x 120 cm

60 x 120 x 120 cm

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300

Description blower for material: power: 1.3 kW power supply: 400 V rpm: 2850 g / min

General SKU212T529 LocationBarneveld MakeFranken TypePTS 250 No.00625 Year of construction1990 Main Features MaterialStainless steel Capacity7200 Ltr./Hr. Specified Features - Separator Separatorcheck Capacity130 Ltr. InletDN50 Liquid outletDN50 MaterialStainless steel 1.4571 (316Ti) Information Total height1 m Weight160 kg Floorspace2,3x0,3 m Extra SpecificationsOperation pressure: -1/2 bar testing pressure: 2,6 bar operating temperature: 200 °C SeparatorsFrankenCentrifuges > SeparatorsBrand > Franken What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU223N084 LocationBarneveld MakeNewmix TypeSysyem 1000 Premium EU No.701024 Year of construction2008 Main Features MaterialStainless steel Motor0.55 KW Length950 mm Specified Features - Stirrer Stirrercheck Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) Motor0,55 KW, 230 Volt With variable speed drivecheck MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x 1,6 m Total height2,0 m Weight400 KG Extra SpecificationsMixer for liquid bags2x kettle 200 l double-walled on wheelsTempering unit Single STL 1-9-B5/10-TKGStirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

General SKU223N083 LocationBarneveld MakeNewmix TypeSystem 1000 Premium EU No.701024 Main Features MaterialStainless steel Motor0.55 KW Length950 mm Specified Features - Stirrer Stirrercheck Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) Motor0,55 KW, 230 Volt With frequency controllercheck MaterialStainless steel 1.4301 (304) Information Year of construction2008 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x 1,6 m Total height2,0 m Weight400 KG Extra Specifications- Mixer for contents of bags with liquid - 2x kettle 500 liters: double-walled, mobile - Tempering unit Single STL 1-9-B5/10-TKG StirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...

General SKU232U228 LocationBarneveld Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm Information Makeunknown: missing type plate Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pig ...

Aggregate replacement motor Scania Type=DC12-45/52/55/56/58/59/60A,ca.350KW general overtaking with 1 year warranty. Request to: info@miw-zeven.de

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Wir verkaufen einen generalüberholten DC12 54A Zündstrahlmotor mit komplett neuen Teilen. Der Motor wird vor Auslieferung aus unserem Werk noch einmal auf unseren Prüfstand gebracht.

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

Immediately available New ovens - Exhibition e.g. SLS-15o Electric circulating air oven , Horde wagon Inner BHL: 1200x1800x1600 mm Price from 8,900 + freight

Make : Trepko Model : Split Cup Capacity : 1000 c/h Stations : Cup Dispenser-Granuals or Cereals Filler- Yoghurt Filler- Aluminium Lid placing - Sealing - Outfeed conveyor-pick and place unit Cup Diameter: 95 mm

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN20 -Width: 152 mm -Nominal pressure: PN16 -Dimensions: 152/106/H186 mm -Weight: 3.6 kg

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

General SKU345S1073 MakeUSF Seitz Filtertechniek GmbH LocationBarneveld TypeSEITZ-VELAcart Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles5 Top connectionsDN25 Capacity34 Ltr. MaterialStainless steel Information No.542 Year of construction2000 Mounted on legscheck Floorspace0,4x0,3 m Total height1,5 m Extra SpecificationsInlet: DN50 Outlet: DN50 Max. working pressure: 10 bar Test pressure: 14 bar Max. temp: 85/134 °C Content: 34 Ltr. WITHOUT CANDLES Candle filtersUSF Seitz FiltertechniekFilters > Candle filtersBrand > USF Seitz Filtertechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...

Used Used Case Erector Sge: Year: 2007 Condition: Good Used Case Erector Sge Year: 2007 Speed: 8.000 bph Model: formacartoni Gluer included Safety protections Code: G 65 More details: https://bottlingscout.com

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve -Manufacturer: Sisto, gate valve diaphragm valve Ovp -Connection: DN40 PN10 -Number: 5x valve available -Price: per piece -Cardboard dimensions: 250/180/H290 mm -Weight: 7.5 kg/pc.

Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or ...

x-travel:1530 mm y-travel:530 mm z-travel:465 mm side by side, right side fixed table X =:925 mm side by side left side 2 axis table X =:780 mm control:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/min Spindle Torque:120 Nm power capacity:22 kW Fixed Table Dimensions:920 x 540 mm Table load fixed table:2000 kg Max. parts size on fixed table:900 x 500 x 400 mm Diameter of integrated 2-axis rotary table:650 mm Table load rotary table:500 kg B-axis swivel angle:-90°/+110° ° / deg Max. parts size on rotary table:600 x 500 x 400 mm Max. Parts size over both tables:1500 x 500 x 400 mm internal coolant system feed:70 bar bar weight of the machine ca.:10,5 t dimensions of the machine ca.:3,65 x 2,53 x 2,81 m pendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new ...

Safe - safe STRACKESsecurity level / resistance grade III1 key lock VDS class 2(B)1 mechanical code lock 2(B) with armoured keyhole lockInterior dimensions: W=650 mm, H=1300 mm, D=445 mmInterior with bulkhead and collection device- Bolt work with 3 sides locking- Key lock with one key (2 keys available)- with insertion slot 160 mm- 19 pieces plastic insertion boxes 140 x 270 mm- Operating instructionsExternal dimensions: W=790 mm, D=675 mm, H=1440/1800 mmWeight: 1330 kg; used

approx. 24 pieces frame SSI Schaefer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded from location! Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Frame height: approx. 2.28m Frame depth: 30cm Condition: good Available: as of now Location. Frankenberg / Saxony

Hydraulic guillotine shears STEINER type HTS 30/20 RMasch. No. 315 Year of construction 1982Cutting length 3050 mmCutting thickness 20 mmBack gauge 800 mm controlledMotor power approx. 30 kWNet connection 400 volts, 50 Hz- Back gauge with positioning control ELGO- Back gauge adjustment via ball screws- Safety light barrier SICK front as protection against interference- 3 pieces Material Support arms with ball rollers- Electric foot switch- Replacement knifeSpace requirement of the basic machine L x W x H 4650 x 2610 x 3200

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators