parallel used for sale

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

including speed regulator and a foot. Without belt. 0,75     Kw

gauge block box, gauge blocks, gauge block holder, parallel support, parallel support pair, plane-parallel measuring leg -Manufacturer: Koba, parallel gauge block set -Gauge block holder: 0-200 -Gauge block set: not complete, see photos for contents -Dimensions case: 545/210/H45 mm -Weight: 5.0 kg

SCHUNK 2 finger parallel grippers and Rotary unit new Parallel grippers: PFH 40-AS / 302041 Rotary unit: OSE-A34-4 / 354304 Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

KAWASAKI YF03N ULTRA HIGH SPEED DELTA ROBOT The Y Series robots are parallel type pick & place robots and offer quality and reliability. Brand Kawasaki Type YF03N Year of construction 2010 Serial number YF0030012 Electrical connection 400 V Total dimensions L 2400 mm Total dimensions W 2350 mm Overall dimensions H 2750 mm Description of the Kawasaki YF03N robot Type Parallel Kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) 1 ± 0.1 Range of motion (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) 2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volts; camera; Software; instructions; components; Iron frame, with control cabinet; 2x connection cable 5-pin; Control panel E40E-A003

x-travel: 0 mm y-travel: 0 mm workpiece height: mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: 0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

Pneumatic 2 finger parallel gripper, PGN+ 160-1-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see  ...

2 finger parallel gripper with return spring, PGN+ 160-2-AS-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. 2 finger parallel gripper with return spring, external closing, PGN+ 160-2-AS-SD, Schunk, second-hand - the gripper has been tested and is fully functional - one piece is missing a cover plate which will be replaced by us. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude w ...

x-travel: 6300 mm y-travel: 2200 mm workpiece height: 1835 mm Table area: 6000x1835 mm Rest: 2 Side head: 2 number of T-slots: 7 T-slot - distance: 240 mm T-slot - width: 28 mm bed length: 14650 mm column daylight: 2075 mm feed: 5-60 m/min workpiece weight: 15000 kg total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 14,65x4,37x4,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Final dimensions, reference standard LEFT FIRE 125 - 400 mm in wooden box Dimensions: 645 x 155 x 55 mm

Flat gear brake motor, ADE 50 TD, Demag, mint condition -60% Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, - has very slight signs of storage, Flat gear brake motor, ADE50TD-D1.3-65-0/ 112, Demag, - Output speed 6.1/24.6 rpm - Motor speed 685/2760 rpm - Power 0.290/1.200 kW Motor protection class IP 54 Transmission ratio 112.0 - Motor installation position horizontal - Total weight, net approx. 81 kg - 380-400 V, 50 Hz, 2.10/3.20 A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We wi ...

Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Optical Parallel Gauge Measure, Gauge Dimensions, Reference Normal MITUTOYO Series 157 Code No.: 157-903 157 - 101, 102, 103, 104 4 parts in plastic box New ! Dimensions: 170 x 90 x 35 mm

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

Type: PGHC40/100-7000 , equipped with 4 cylinders, KN: 400 , Stroke: 100 . The Hyla-Lift parallel lifting device, for tilt-free parallel lifting of tool tops in the event of extremely uneven weight distribution or column damage Auction-ID: A7-48332-783

Type: PGHC40/100-7000 , equipped with 4 cylinders, KN: 400 , Stroke: 100 . The Hyla-Lift parallel lifting device, for tilt-free parallel lifting of tool tops in the event of extremely uneven weight distribution or column damage Auction-ID: A7-48332-784

6 parallel plots, large dimensions: 1500mm, 1000mm and 750mm; for more details see photos of the nameplates Auction-ID: A7-48332-640

in wooden box Auction-ID: A1-48903-180

Approximate size 800 × 2250 × 1700 mm equipped with DiTron D602V control Bar Passage: 65 mm Auction-ID: A7-48410-882

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-48609-209

For sale: Robust and compact Sincrón industrial gearmotor (manufactured by C.M. Domenech, S.A. in Olot, Spain). Designed for heavy-duty power transmission and speed reduction in industrial plants. Highly suitable for conveyors, agitators, elevators, screw conveyors, and general industrial machinery. Sold in "as-is" condition. Technical Specifications: • Brand: Sincrón • Manufacturer: C.M. Domenech, S.A. (Spain) • Gearbox No.: 94/5974 • Model: 1060-XEHC-1115 • Power: 1 HP (approx. 0.75 kW) • Input Speed (Motor): 1,420 rpm • Output Speed (Gearbox): 8.45 rpm • Reduction Ratio: 167.9:1 • Type: Parallel shaft helical gearmotor • Mounting: Foot-mounted (sobre patas) • CE Marking: Yes Approximate Dimensions & Weight: • Dimensions: 100 cm (Length) x 40 cm (Width) x 40 cm (Height) • Weight: approx. 80-90 kg Condition: Used industrial equipment ...

Strip width: approx. 50 mm, total length: approx. 6200 mm, 2 geared motors Auction-ID: A7-48794-419

stroke: 300 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.