We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,808 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
- electric engine, approx. 2 x 110 kW - shafts 7/7 discs with 5 knives per discs (reconditioned) - breaker bar with combs (reconditioned) - Hook Lift Frame - water sprinkling system - discharge belt with a discharge height approx. 3,400 mm - Remote control - weight approx. 20 t
used
- Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - Built in 2013 - only 12,500 hours - with second cutting table - Incl. power pack and control cabinet - Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - year of manufacture 2013 - only 12 500 hours - with second cutting table - with power pack
used
Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg
used
Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2
used
Ripper 1 shaft with hydraulic pusher, brand: Vecoplan, rotor measures: 1600x350 mm, dice: 40x40, motor: 75 Kw (100 hp), hopper measures: 1600x2200 mm. No electrical panel.
used
Ripper 1 axle, with hydraulic pusher, brand: Vecoplan, rotor measures: 1580x350 mm, die: 40x40, motor: 75 Kw (100 hp), hopper measures: 1580x2200 mm. With electrical panel.
used
SPECIFICATIONS: Crushing chamber mm: 2000 x 1500 Rotor length mm: 800 Installed capacity KW: 18 Capacity: 300/500 kg per hour Screen diameter mm: 18 Hydraulic operation
used
Specifications Cutting width: 6 x 40 mm Year of construction: 1994 Productivity: approx. 70 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s Security level: P3 Power supply: 380 V/2.2 kW Machine is fully functional, after technical supervision.
used
Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.
used
Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.
used
Impact mill SBM Austria (for sand) Brand: SBM Austria Type: 8/4/2 XR8/4/2 XR Inlet opening: 470 x 200 mm Incl.: electric motor 30-75 kW
used
Specifications Maximum pressure: 6 tons Power supply: 400V / 2.2 kW Press force: 2.5 kg/cm² Year of construction: 1993 Bale size: 600x400x500 mm Productivity: approx. 3 bales/hr Bale weight: approx. 50 kg Price: on request Shredder Cutting width: 3.8 x 50 mm Year of construction: 1993 Power supply: 400 V/ 4 kW Price: on request Safety level: DIN 66399 O-2/P-3/T-3/E-2/
used
Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW
used
Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request
used
Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.
used
Manufacturer: Mercodor, Type: ZM 44, Year: 1992, Control: yes, Number of rotors: 2, Number o knifes: 33, kW power rotor: 7,5, Feeding width mm: 500, Feeding hight mm: 650, Length/width/height: 1400x1050x1500, Wight approx. kg: 350, Year :1992
used
Manufacturer: Prodeco, Type: M1, Year: 2012, Number of rotors: 1, kW power rotor: 15, rotor diameter mm: 240, Dimensions of funnel in mm: 1000 x 800, Length/width/height: 1615 x 1000 x 1500, Wight approx. kg: 1080, Year :2012
used
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 2300 Year of construction: 2010 Specifications: Main drive power: 1 x 75 kW, 134 A rpm: 1500 Hydraulic drive power: 5.5/0.75 kW, 11/1.9 A rpm: 1.500 60s Cutting Crowns Weight: approx. 14,000 kg
used
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.
used
Balemaster HL 160 – Air shredder system with feed belt, built in 2012 Specifications Manufacturer: Balemaster Europe Type: HL 160-Air Year of construction: 2012 Motor: 22 kW Feed width: 1600 mm Belt speed: 15 m/min Throughput: approx. 3.5 t/h Weight: approx. 4000 kg Material: corrugated cardboard, paper, cardboard boxes
used
AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg
used
1-shaft ripper. Brand: Silmisa, model: MSA 630, cutting chamber: 700x630 mm, motor: 45 Kw (60 hp), rotor width: 630 mm, rotor diameter: 400 mm, year: 2004. With electrical panel with touch screen.
used
1-shaft ripper with hydraulic pusher, brand: Zerma, model: ZSS 1200-E, cutting chamber: 1200x400 mm, motor: 55 Kw (75 hp), hopper: 1.57x1.12 m, year: 2010. Replacement brackets and blades. 1 New spare gearbox. With electrical panel.
used
Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.
used
Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg
used
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately
used
Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit
2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT
used
2- Shaft shredder for pre-crushing sperm, beams, etc. with overbelt magnet Diesel engine from CAT
used
Single-shaft chipper with rotor width of 122 cm Rotor diameter 500 mm 37 kw motor hydraulic gate valve New rotor bearings
used
Single-shaft chipper with rotor width of 150 cm with 37 kw motor with hydraulic slider
used
Feed opening: 800 x 1,000 mm; Hopper capacity: 0.8 m³; Throughput : 2.5 - 4 rm/h Material and screen dependent; Rotor diameter: 300 mm; Rotor length: 800mm; Number of tools: 20 teeth; Screening: hydraulic moving floor: Yes; Suction nozzle: 250mm; Air velocity: 28 m/sec; Motor power: 15kW; Hours: 4165;
used
- diesel engine CAT C7.1 Tier 4i - approx. 205 kW / 275 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control
used
- diesel engine Cummins B6.7 - Stage5 - approx. 209 kW / 280 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control - weight approx. 24 t
used
Product number: 2858 Type: PM.ZFG-00 Serial number: PM.ZFG-00 Year of construction: 2013 Power: 3 x 400V, 50Hz, 1.9kW Dimensions: 1600 x 1200 x 2100 mm Plucker for shredded meat
used
For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment
used
Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!
used
Used single-shaft shredder for wood, plastics, old cables, etc. Of course, the machine has received new knives and has been checked by us. Accordingly, we give 3 months of used machine warranty. The shredder has the amplified 30 kW drive (normally 15 kW) and is therefore enormously powerful. The rotor stops in the event of overload or blockage and reverses automatically. The hydraulics of the machine are dry, there are no leaks. Currently, a screen with a hole diameter of 14 mm is used, so that it is perfect for old cables. Of course, other screens in the range of 10 mm to 60 mm can also be used. The shredder is immediately available and can be viewed and tested. Further technical data: Rotor length: 630 mm Rotor diameter: 250 mm Feed travel: 600 mm Loading opening: 1,100 x 1,100 mm Drive rotor: 30 kW Drive hydraulics: 1.5 kW Rotor speed approx.: 90 rpm Weight ...
used
Single-shaft shredder with 2500 mm rotor width Rotor diameter 500 mm electro-hydraulic drive 250 kw with hydraulically adjustable counter knife Operational
used
Twin Shaft Shredder, Fabr. Shred Tec USA, opening: 1800x800 mm, drive 2x 37 Kw, 400 V., with control cabinet and inlet tray and frame, weight: approx. 10,000 kg, both motors are new.
used
Manufacturer: Ing.Drüge, Hamburg 6 shaft shredder, YOC 2011, 15,0+22,0 Kw., 400 V., with control cabinet incl. reversing circuit Cutting opening: 600x800 mm, incl. hopper and steel construction Ideal for: files, PC hard drives, CDs, hollow bodies up to 3 ltr.
used
Specifications Cutting width: 3.8 x 50 mm Productivity: approx. 70-75 sheets (A4, 70g/m²) Cutting speed: 217 mm/s Power supply: 400 V / 2.2 kW Year of construction: 1991 Price: on request DIN 66399 P3, O2, T3
used
Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor
used
- 2-axis ripper - Brand: August Seegers - Model: 120P5 - Cutting chamber: 1600x1400 mm - Engine: 131 Kw (180 hp) - Year: 1998. - No electrical panel. - Reference: MF-0065
used
Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!
used
ID2434 Komptech Crambo 5000 Hook year/Year of construction 2007 approx. 6100 hours/hours Shredder Crambo 5000 hook, dispenser without axes, twin-shaft shredder as slow-speed Shredder Crambo 5000 hooks, dispenser without axles, twin-shaft shredder as low-speed
used
ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers
used
ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW
used
Large Four Shaft Shredder with Two Cutting Shafts and Two Feed Shafts. Until now, the shredder has been used as a pre-shredder for the recycling of old cables. Due to the hydraulic tamper, the shredder can also be used for bulky materials. Changing the screens is hydraulically assisted and therefore easy to do. On request, the shredder can also be supplied with the articulated conveyor belt shown here. The conveyor belt is equipped with a magnet in the upper pulley for iron separation.
Shredder für Food More then 300 machines new and second hand on our seema .de