paper mill production used for sale

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the conjugated type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 i ...

Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.

Production line is in good condition

Battery Production Facility Manufacturer: Aumann Year: 2016 Like new 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14 cells) and LTO (36 cells) Find mo ...

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year

For sale: a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measuring system for automated quality control of optical components such as wafers, sensors or micro-optics., This machine was developed for the precise mass testing of optical components and offers the highest measurement accuracy, reliability, and flexibility in industrial applications. Its modular design allows the tester to be perfectly adapted to individual production or development requirements., Features & Equipment, • Integrated laser module (940 nm, circularly polarized) for precise optical illumination, • High-resolution camera with automatic calibration and large field of view, • Robot-based wafer handling (EFEM) for automated loading and unloading, • Analysis software for evaluating efficiency, contrast, uniformity, and performance, • CE certified, including ...

SMD Production Equipment for Sale Hybrid Pick-and-Place Machine - Model: HP-110/110 Ver 1.3 - Condition: Used - Included: Bambi air compressor Reflow Oven - Brand: Dima - Model: Breeze SMRO-0253/0503 Manual SMD Placement Machine - Brand: Dima SMT Systems - Included: JUN-AIR compressor Screen and Stencil Printer - Brand: EssemTec - Model: SP002 The used Hybrid P&P automatic placement machine, type HP-110/110 Ver1.3, built in 2004, including Bambi Air compressor. The following feeders are included with the placement machine: SMCS-4016 - 2 pieces SMCS-4008 - 60 pieces SMCS-4008-1 - 20 pieces SMCS-4012 - 10 pieces SMCS-5000 - 2 pieces Tray holder - 1 piece 1 piece Dima Reflow Oven Breeze SMRO-0253/0503 Year of manufacture 2004 1 piece SMD manual placement Dima SMT Systems with JUN-AIR compressor Year of manufacture 2004 1 piece EssemTec SP002 Screen and stencil printer Ye ...

The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...

This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine.

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Hang 162-55 riveter for the production of kitchen knives - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hang 162-55 riveter for the production of kitchen knives Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hang 162-55 riveter for the production of kitchen knives Price: 4300 EUR Download PDF Hang 162-55 riveter for the production of kitchen knives Manufacturer: Hang Germany The machine is used to crimp rivets in knife holders. For medium and large series Solid welded construction Two motorized rivet feeders, rotating sorting bins Pin rivet tool and transport slider for hollow rivets Pr ...

longitudinal feed: X: 490 mm Vertical feed: Y: 320 mm cross travel: Z: 660 mm Swivel range: C: +/- 200 ° Control: HMC 500 WWM Walter lenght tool piece capture: A: 175 mm ISO 50 Max. rpm: A: 60 min/-1 centre height: 145 (190) mm max. workpiecediameter: 320 mm max. workpiece length: 320 (350) mm resolution: 0,0001 ° Resolution: 0,0001 mm Grinding spindle:: spindle diameter: 80 mm grinding wheel diameter: max. 200 mm Max. rpm: 0 - 7.000 min/-1 driving power - grinding spindle: 24 kW max. Torque: 6 Nm total power requirement: 35 kVA weight of the machine ca.: 4,65 t dimensions of the machine ca.: 3,6 x 2,5 x 2,95 m Documents: pallet loading station: CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) https://stiens.de/en/machines/offerdetails.html?m=1039-9375&s=WALTER%2 0Heli%20Toolcheck T ...

General SKU214X079 MakeUnknown TypeUnknown No.Unknown Year of constructionUnknown LocationBarneveld Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variator3-36 rpm With temperature control20-270°C Electrical heatingcheck With jacketcheck General With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm&:nbsp:Mixing millsRubber-Plastic machinery > Mixing millsIndustries > Chemical > RubberBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU296U565 MakeWAB-Bachhofen LocationBarneveld TypeKD 45 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) With jacketcheck General No.760735 Year of construction1976 With switchgear(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatin ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm MaterialMild steel, stainless steel 1.4000 (aisi 429) With jacketcheck General No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed >  ...

General SKU291Y514 MakeFryma TypeML180 Year of constructionunknown Main Features MaterialStainless steel Motor11 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 180 x 28 mm Teethed rotorcheck With hoppercheck Inletø 30 mm Outlet200 x 60 mm Motor± 11 kW, (380 V) MaterialBrass, Stainless steel 1.4408 General LocationBarneveld Floorspace0,5 x 0,7 m Total height1,15 m Weight220 kg Extra SpecificationsThroughput range 1,000–12,000 L/hr.&:nbsp:Achievable particle size 0.5–5 mm.&:nbsp:Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyColloid millsFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicFrymaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic ...

General SKU291Y527 LocationBarneveld MakeKarl Schnell Type062-F282-248 Motor Motor power21 kiloWatt Main Features MaterialAluminium/Stainless steel Motor21 KW Inlet diameter200 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 240 x 155 mm With hoppercheck Inletø 200 mm Outlet185 x 75 mm Motor21 kW (380 V, 2880 rpm) Speed2880 rpm Material1.0257 St 44.4, Stainless steel 1.4305 (303) General No.Unknown Year of constructionUnknown With switchgear(as is) Floorspace0,6 x 0,9 m Total height1,7 m Weight500 kgOils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyColloid millsFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical >  ...

General SKU291Y475 MakeKarl Schnell Serial42942 Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter165 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 220 x 50 mm With hoppercheck Inletø 165 mm Outletø 100 mm Motor55 kW (400 V 2880 rpm) Materialstainless steel 1.4006 (AISI 410) General Type080 F248 Mounted on framecheck LocationBarneveld Floorspace1,15 x 1,00 m Total height1,55 m Weight700 kg Extra SpecificationsWithout perforated disc.Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyColloid millsFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesIndustr ...

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary  ...

Various millstones

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power