paper core machine used for sale

For grooves and grooves according to the method of beam groove Benefits: The 62 cm working width allows grooves, grooves and perforates even for large formats. The robust structure of this groove machine and creasing machine makes it possible to groove and groove up to 3 mm thick cardboard. Special tools can also be installed. (e.g. small punching tools, perforation tools...) By printing e.g. on a paper mallow a buckling edge (fold) is produced. This fold allows the bag to be folded/handled cleanly with a bag. Ideal if the bags are made of several layers of paper. Dimensions 850 x 750 x 1150 mm Built in 2014

Size: C6 to C5,C6/5(DL) Equipments: HSW PostBox-System transfers your mailings postage-optimized to your national postal service providers, With a Post Box System by HSW for automatic postbox loading, you increase the efficiency and cost we have 3 identical machines

<br>8-30 mm<br><br>Still in operation: Yes<br>Available: immediately

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

JBT C8A Apple coring machine 2016, Stainless, peeling, coring and segmenting machine, 400 apples per minute, apples are fed from the water flume into the shuffle feeder and into 8 cups across conveyor before finally into the coring peeling and segmenting section, variable speed, infeed 3000mm and main body 4400mm, 9Kw, 3Ph

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Core drill: Ø 202 mm -Dimensions: 500/370/H1070 mm -Weight: 53 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm

For sale: Bragernes aut. coreless rewinder, year 1981, web width 1000 mm, Unwind dia. 1000 mm. Can make rolls from 5 m up to outside dia. 50 mm With web guide and tension control. Available: Now

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

2930-12-334-9277 / 0052000675

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

Drill diameters 8 - 40 mm Drill taper MK4 Max. profile height 1.000 mm Max.Profile length 18.000 mm Max. thickness 150 mm Controller Siemens 840D

5kg = approx. 149 pcs welding electrode, rod electrode with reinnickel core rod unused, Manufacturer Thyssen Type Nickel A Original shrink-wrapped in foil, ovp in cardboard! The electrode melts slightly delayed by a pulsating arc, whereby a very good wetting of the base material is achieved. Particularly suitable for joint welding on grey cast iron (old cast iron) Dimensions, welding data, packaging units Diameter (mm) Length (mm) Welding current (A) Directional weight (kg/1000 pcs) Package contents (pieces) Package contents (kg) 2,5 350 50 - 100 21,0 238 5,0 3,25 350 70 - 130 33,5 149 5,0 4,00 350 90 - 150 49,5 101 5,0 Weight approx. 5kg Diameter 3.2mm

Square screws with core attachment, 46 pieces PAGUS M8 x 75 mm DIN 479 pitch: 1,25 Thread length: 65 mm Total length: 75 mm Screw cap: 8 x 8 mm head thickness: 8 mm Core attachment: Ø 6.5 x 2 mm Material: Steel New ! Dimensions ( packaging ): 160 x 110 x 35 mm

Cored wire electrode BÖHLER Union MV 70 71525 Diameter: Ø 1.2 mm Quantity: approx. 16.0 kg Reel: Ø 300 mm New Dimensions ( single ): 300 x 300 x 100 mm Dimensions ( packaging ): 310 x 310 x 105 mm

Cored wire electrode BÖHLER Union RV 71 73191 diameter: Ø 1.2 mm quantity: approx. 14.5 kg reel: Ø 300 mm New ! Dimensions ( single ): 300 x 300 x 100 mm Dimensions ( packaging ): 310 x 310 x 105 mm

High-alloy metal powder cored wire, stainless steel welding wire BÖHLER CN 23/12-MC 57886 Diameter: Ø 1.2 mm Quantity: 16.0 kg Reel: Ø 300 mm New ! Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

High-alloy cored wire electrode, stainless steel welding wire BÖHLER EAS 4 PW-FD 36059 Diameter: Ø 1.2 mm Quantity: approx. 14.5 kg Reel: Ø 300 mm New Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

Cored Wire Electrode SANDVIK 19.9.LT AWS A5.22: E308 LT-1 Diameter: Ø 1.2 mm Quantity: approx. 5.0 kg Reel: Ø 300 mm New ! Dimensions: 300 x 300 x 100 mm

Cored wire electrode, CrNi flux cored wire based on rutile slag for MAG welding OERLIKON FLUXINOX 309 L DIN 8556-23 12 L W.-No. 1.4332 ASME Sec.II/C/SFA-5.22/E 309 L T-1 Diameter: Ø 1.2 mm Spool K300 Quantity: 15 kg New ! Dimensions: 300 x 300 x 105 mm

Cored wire electrode, CrNi cored wire based on rutile slag for MAG welding OERLIKON FLUXINOX 308 L DIN 8556-19 2 L W.-No. 1.4316 ASME Sec.II/C/SFA-5.22/E 308 L T-1 Diameter: Ø 1.2 mm Spool K300 Quantity: 10 kg New ! Dimensions: 300 x 300 x 105 mm

Cored wire electrode, stainless steel welding wire, MAG wire electrode BÖHLER UTP AF 6808Mo DIN 8556 MFX2 CRNIMON 22 8 W.-No. 1.4462 Diameter: Ø 1.2 mm Spool K300 Quantity: 15 kg New ! 310 x 100 x 310 mm

Cored wire electrode, Rutile-slag-based CrNi cored wire for MAG welding OERLIKON FLUXINOX 309 Mo L DIN 8556-23 13 2 L W.-No. 1.4459 Diameter: Ø 1.2 mm Spool K300 Quantity: 15 kg New ! Dimension: 300 x 300 x 110 mm

Core drill, core drill, diamond core bit, drill bit -Quantity: 9 pieces diamond drill bits -Price: complete -Condition see pictures -Core drill: Ø 2x40/1x50/5x60/1x85 mm -Length of the drills: 400 mm -Recording: Threaded recording -Weight: 12kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Core cable: stranded wire 1 x 10 mm flexible, finely stranded -Length: 16 m -Dimensions roll: Ø 500 x 415 mm -Total weight: 16 kg

Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete

There are two identical cabbage corers available.

Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

Qty. 1 Second-hand Kraft (Flute Liner) paper mill Mfc.: Mitsubishi – Bellot Built: 1973 Overhauled: 2005 by VOITH / IHI Very high investment! Type: Kraft – Flute liner paper mill Width: 3363 mm Kraft (Flute liner) Paper mill Product: Flute Liner Printing Paper Kraft Paper Writing Paper Grammage: 80 – 260 g/m² (70-120 gsm basic) Rebuilt main components of the mill by VOITH & IHI in 2005 Paper width: 3200 mm to 3363 mm Speed: 600 m/min to 800 m/min Max. 800 m/min. at 80 gsm Capacity range: 170 ton/day to 270 ton/day Former: Hydro former (with Dandy roll) to Duo former Dilution Head box Size press: Pond size press to Speed sizer Vacuum pump: renewal

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

A pile cutter from IDEAL 3915-95 with base frame is offered. The pile cutter is used Year of manufacture 2004 and in very good condition with accessories. The machine has no faults whatsoever and works perfectly. Electrical connection: 230 V / 50 Hz / 1~ Motor power: 0.45 kW Dimensions: W 600 x D 695 mm x height 1070 mm Weight: approx. 80 kg Technical data processing: Cutting length: 390 mm Insert height: 40 mm Remaining cut: 35 mm Insertion depth: 390 mm Accessories 3 spare knives and 4 pressure strips VAT can be shown on the invoice, collection must be organized by the buyer

W & H T 1441 FLAT PAPER HANDLE MACHINE

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

We offer the following Flat- and satchel paper bag machine for sale: Producer : Windmoeller & Hoelscher Type : Matador NP 38 Year : 1994 Bag width : 60 – 380 mm. Cut-off length : 200 – 600 mm. Roll width : 1060 mm. Roll dia. : 1200 mm. With : W&H Alina 650 - 4 colour in-line printer With: Window unit Still in operation: Yes Available: Now

8-30 mm Still in operation: Yes Available: immediately

Mfc.: Fischer & Krecke Type: Maxima 26 Built: 1975 - 1980 Width range: 45 - 260 mm Length: 85 – 650 mm Reel width: 700 mm Equipped with 3 colours units Capacity: 700 bags/min. Very good condition!

Rebuilt 2006 Cutting width-1.850 mm Feeding height 165 mm max Feeding depth 1,850 mm max Front table length 730 mm Table height 900 mm Equipment air table program cutting line indicator 2 knives pile lift PL 3 Jogger Vibro Info: computer modern cut control

; ready for use

- 2 head drilling machine - standard machine - desk model

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)

Producer : Holweg Type : RS 26 ( perforation type ) Year : 2001 Bag width : 70 – 380 mm. Cut off length : 160 – 760 mm. Gusset depth : 12 – 80 mm. Material : 25 – 125 g/m2 With photocell for pre-printed material With servo-gear on perf. station With window unit (can split in 3 web) With hot-melt glue unit

Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.

Four head paperdriller Lawson-Dexter Model B3 Heavy Duty Drill Year 1985-1990´s Details 4 head paper driller Variable drilling speed Variable drilling spinning speed Operation Electric footswitch Available Direct

Gluing machine for paper Prakma Model 55 Year 1970´s Width 550 mm Options with stripe gluing rollers Available Direct

Stacking height: 50 mm Speed: 18 sec. Made in Japan

A paper drill is sold. This was in use until its closure about 5 years ago. Machine can be inspected under electricity

Condition: Very good condition

Original digital program MCS 2 Central and side air tables Light guards. 2 Knives. Complete cleaned, checked and tested In full working order mechanical and electrical Available immediately.