paper converting: other used for sale (287)

Manufacturer: Schiavi / BOBST Model: Rigel Year of Manufacture: 2001 Colors: 8 Print possibilities: 4+4 Materials: LDPE, HDPE, BOPP, CPP, PET, ALU, PAPER, BIO Gearless: No Checked up: 2022 by BOBST technicians both mechanic and electric parts Max Speed: 300m/min Fast Sleeve Change: Yes Fast Sleeve Anilox Change: Yes Computer Supervision: Yes Web Width: 1320mm Print Width: 1290mm Min Print Repeat: 430mm Max Print Repeat: 1200mm Unwinder Type: Double Turret Automatic Flying Splice Winder Type: Double Turret Automatic Flying Splice Max Reel Diameter Unwinder: 800mm Max Reel Diameter Winder: 800mm Drying: Thermal Oil Video camera: Yes (FIFE) Corona Treatment: Yes (Cason) for conductive and non-conductive materials Web Guides: In and out (BST) Viscosity Control: Gama (not in use, must be repaired) Inking System: Ceramic Anilox + Chambered Doctor Blades Anilox Sleev ...

Manufacturer: LAMINA Model: 1114 FA Year of Manufacture: 1998 Size max: 1400×1100 mm Size min: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0,6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour Find more here - / Contact us at -

Manufacturer: Nexa3D Model: QLS260 Year of Manufacture: 2019 Electrical Specifications: - Input Voltage: 220–240 V - Frequency: 50/60 Hz - Current: 25 A, 1 Phase - Max Short Circuit Current: 240 Vac, 5 kA Pneumatic Requirements: - Compressed Air: 80–120 psi - Nitrogen: 15–30 psi Find more here - / Contact us at -

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked Find more here - / Contact us at -

Manufacturer: Heidelberg Model: HM450 Year of Manufacture: 2007 Weight: 1630 kg Equipped with 4 stations. Includes a three-knife trimmer with cutting die and Heidelberg sewing heads. Find more here - / Contact us at -

CTP plate setter Advantage DL+ Plate developing machine VPP 68 Find more here - / Contact us at -

Advantage N-SL 2010 CTP plate setter Advantage N-SL+ Plate developing machine VPP 68 +Nela fully automatic plate punching machine with video cont Find more here - / Contact us at -

Edge banding machine Sumbel Perkeo 60; cleaned and tested; Working width 60mm; 1 roller; Speed adjustable; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; cleaned and checked; working width 60mm; one roller; adjustable in speed; Used for cold glue.

Grooving, ruling and perforating device with 600mm working width, foot control

Automatic creasing/perforation for formats up to 630 mm x 330 mm, manual system, table model

Manufacturer: EOS Model: M 100 Year of Manufacture: 2016 Machine Type: Laser-Sinter System / Metal 3D Printer Build platform: Diameter 100 mm x Z 95 mm Technology: DMLS Materials: CoCr, 316L, option available for Ti64 Laser: Yb-fibre laser; 200 W CE Certified: Yes Electrical Specifications: - Voltage: 230 V 1~ / N / PE or 200–240 V 2~ / PE - Full Load Current: 8 A - Net Fuse: 16 A (1~) / 15 A (2~) - Frequency: 50 / 60 Hz - Nominal Power: 1.7 kW - Short Circuit Current Rating: 5 kA Physical Specifications: - Total Weight: 570 kg Condition & Notes: - Machine is fully functioning, but currently missing a filter, which is required for operation. - Last maintenance: 17/08/2024 — the machine has not been used much since. - No accessories included with the sale. - A Concept Laser QM powder sieve can be sold separately if required. Find more here - / Contact us at -

Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.

A used paper spike drilling machine Citoborma 290 B

Bacciottini Pit Stop Mini Creasing Machine; cleaned and tested; Max. sheet format 350x300mm, min.100x150mm; Paper weight 80-400g; 3 tools (2xgrooving tool, 1xperforation); Program memory. Creasing machine Bacciottini Pit Stop Mini; cleaned and checked; max.paper size 350x300mm, min.100x150mm; paper weight 80-400g; three tools(2 creasing, one perforating); Program Memory.

Bacciottini AF Speed creasing machine; Condition as is, is sold as a spare parts carrier; 3x grooving tool, 1x perforation tool. Creasing machine Bacciottini AF Speed; condition as is only for spare parts; three tools for creasing and one tool for perforating.

Manufacturer: Kornit Model: Breeze Print count: 128,500 - The printer is sold without print heads - It has an integrated pre-treatment unit. - The set includes tables for body and sleeve prints, as well as for children´s t-shirts. I have a Kornit Breeze printer for sale, from a Polish distributor. The print count is 128.5 thousand. The printer is sold without print heads. It has an integrated pre-treatment unit. The set includes tables for body and sleeve prints, as well as for children´s t-shirts. The printer has not been used for a year. I can issue an invoice if needed. There is also an option to purchase individual parts – we can sell 3 different mainboards, tables, manifold, side doors, or the wiper mechanism. The machine was installed here in November 2018. The manuals show the date 2017, the year is most likely one or the other. Find more here - / Contact us at -

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Vacuumatic Vicount Paper Counter Single-head paper counting machines for the security and commercial printing industries. Paper Substance Range: 25gsm to 240gsm, subject to paper quality. Count Speed From 500 To 2000 Sheets per minute, depending on paper quality and batching requirement. Batching: Tabbing interval 2 to 9999 sheets in steps of 1. If the batch size is small there may be a limit to count speed and stack height. 10 lengths selectable. Facility to store 10 different variable batch programs, each program having up to 25 lines. Maximum Stack Height 230mm. Mains Supply Options: 230V ac 1N - 50/60HZ 2.5A f.l.c (full load current) or 115V ac 1N 50/60 Nz 5A f.l.c Efficient paper counting and batching.

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, with Kohmann suction belt feeder with adjustable chain station squaring section with suction table max format 1000 x 700mm min format 100 x 80mm Variable cut off length of foil by means of the change gears with stereo cylinder and glue-impression roller The glue stereo can be made ready outside the machine. The stereos are glued onto a carrier film which then can be easily mounted onto the stereo cylinder in the machine. In this way the stereo can be stored for reuse on repeat jobs. with delivery station electrical equipment for 380 v, 50 cycles AC with electrical push-button controls,

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA

Manufacturer: Stratasys Model: F370 Year of Manufacture: 2020 Operating hours: 3,493 Construction volume: 355 × 254 × 355 mm Variety of materials: ABS-M30, ASA, PC-ABS, TPU 92A, etc. Reliability: Closed build chamber with controlled temperature User-friendly: touchscreen, easy material handling, automatic calibration Software: GrabCAD Print compatible Power connection: 230 V Condition & Accessories: Very well maintained, no damage Fully functional 2. Material print head for CF material included Various printing materials included (some leftovers, but also originally packaged spools) Find more here - / Contact us at -

HAND CREASING & PERFORATING Equipment / further information: new tool for perforating

Vacuumatic MK 6; mobile paper stacking machine with strip intake; min. sheet size: 560x300mm, max. sheet size: largest commercial pallet; Paper stack height: 1,350mm incl. pallet; Minimum pallet height: 130mm; Counting speed: infinitely variable up to 1,500 sheets/min.; Strip Shot: 20-999 sheets; Material range: 30-170 g/m2 depending on flexibility; Electrical connection: 230V/50Hz; Specially designed for paper converters to allow accurate control of the number of sheets of palletized paper (printed or unprinted). Vacuumatic MK 6; mobile paper stack counting machine with strip insertion; Min. Sheet Format: 560x300mm, Max. Sheet Format: largest commercially available range; Paper stack height: 1,350mm including pallet; Minimum pallet height: 130mm; Counting speed: infinitely variable up to 1,500 sheets/min.; Stripe insertion: 20-999 sheets; Material range: 30-170 g/m2 depending on fl ...

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Manufacturer: Rabolini Model: Imperia Type of Machine : Die–cutting press Find more here - / Contact us at -

Rotary feeder, 1 valve station, bottom patch with 2 color tail end printers, pressing and packeting station

Duplo 645 in production ready condition. Counters: cut: 102 670 crease 355 946 paper: 419 128

Manufacturer: ProJet Model: 5500X Year of Manufacture: 2015 Printer Usage : Machine Hours: 1016 hrs, 54 mins, 00 secs Build Hours: 376 hrs, 12 mins, 39 secs Lamp Hours: 134 hrs, 07 mins, 47 secs Support Material Used: 0.10 kg Upper Part Material Used: 0.09 kg Lower Part Material Used: 0.00 kg It comes with a extra build plate, documentation, software and a few extra parts. 3D Systems’ ProJet® 5500X uses proven MultiJet Printing (MJP) technology to build the highest quality, most accurate and toughest multi-material parts available. Print finely detailed parts with varying degrees of flexibility, material transparency and color (black, white, or select shades of grey), all from one 3D printer. The ProJet 5500X features the fastest print speeds, a large build volume, and the most convenient print-to-part process, so it’s easier to create parts with engineered plastic or ru ...

Stratasys Objet24 Specifications Build Volume - 234 × 192 × 148.6 mm (9.21 × 7.55 × 5.85 in) Layer Thickness & Resolution - Layer Thickness: 28 microns (0.028 mm) - XY Resolution: 600 dpi - Z Resolution: 900 dpi Accuracy - ±0.1 mm Materials & Technology - Technology: PolyJet (material jetting with UV curing) - Materials: VeroWhitePlus™ (model), FullCure 705 (support) Printer Size & Weight - Dimensions: 825 × 620 × 590 mm (32.5″ × 24.4″ × 23.2″) - Weight: ~106 kg (234 lbs) Power & Connectivity - Power Requirements: - 100–120 VAC, 50–60 Hz, 7 A - 220–240 VAC, 50–60 Hz, 3.5 A - Network: Ethernet (TCP/IP) Find more here - / Contact us at -

Manufacturer: Presstek Model: 34DI Year of Manufacture: 2006 Type of Machine : Digital Offset Printing Press Total length: 320 cm Max. print format: 450 mm Max. sheet size: 460 mm Production speed: 7,000 sheets/hour Total impressions: approx. 4.2 million Installation area: 350 × 300 cm Includes inks and maintenance materials Complete maintenance performed in 07/2022, including full disassembly, cleaning, and reassembly Find more here - / Contact us at -

Manufacturer: KBA Model: 46DI Year of Manufacture: 2004 Type of Machine : 4-color offset printing press Includes transport pallet and server 5.8 million impressions total Production speed: 7,000 sheets per hour Comes with inks and maintenance materials (including 4x4 CMYK) Installation area: approx. 350 x 300 cm Complete maintenance performed in July 2022, including full disassembly, cleaning, and reassembly Find more here - / Contact us at -