129,386 used machines on RESALE, but how to find them? Machine Search
Miwe DS control panel for stikken furnaces Control panel for Stikkenofen Miwe static
Control for KOMA Monocell for Freezers used on request more info
Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper
Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height ...
approx. 200 Felder Wide-span racks / shelving racks, SSI Schaefer, with steel shelves – used – : Price per field with steel shelves from location: 295.-€ (net), dismantled, packed and loaded! Price per field without steel shelves from location: 225.-€ (net), dismantled, packed and loaded! Additional simple trusses: 5.-€ (net) / piece Manufacturer: SSI-Schäfer Type: Bundle flow rack (converted) Year of Make: 2013 With 3 floor levels per field! Frame width: approx. 6cm Frame depth: approx. 85cm Truss height: approx. 6cm Dimensions of steel shelves: Depth: approx. 76.5cm, width: approx. 30cm. Height: approx. 2cm, stock approx. 130 pcs. Depth: approx. 76.5cm, width: approx. 20cm. Height: approx. 2cm, stock approx. 76 pcs. Bracing beam: height approx. 6.5cm Available frame heights: Shelf height: approx. 2.20m Depth: 85cm Number of frames: 288 piec ...
Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking
Key data: 4200 , 2200
PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system ...
sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTe ...
sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS ...
sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...
Simatic Multi Panel Touch Siemens Siemens MP 277 10 inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 pieces Condition: used Price per piece Width outside: approx. 330 mm Depth outside: approx. 275 mm Width inside: approx. 305 mm Depth inside: approx. 245 mm Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make you an individual offer or advise you on the design or installation questions. Simply let us know your ...
robust and powerful panel saw, HOLZ-HER Type 1265 Supercut ideal for cutting up to a maximum cutting height of 2000 mm and a cutting width of 4250 mm. The machine impresses with its compact design and generous machining options at the same time – perfect for professional use in workshops and companies. Technical highlights: Max. saw blade diameter: 222 mm Max. cutting depth: 60 mm Drive: 3.0 kW at 400 V, 16 A Center hole diameter: 30 mm Compact transport dimensions: 5000 x 1200 x 2680 mm Condition: Good used condition – functional, without documentation The machine can be viewed and tested at any time 2 pieces in stock – if you have any questions, please do not hesitate to contact us Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Phone & WhatsApp: 0160 966 798 44 Errors excepted / Prices net plus VAT
sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws, automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...
sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3220 mm, 1550 mm
HARWI 1550 Giraffe Vertical Panel Saw Brand: Harwi Type: Giraffe 1550 Year: 1995 M-Nr: 5000 CK Max. cutting width: 1,550 mm Max. cutting length: 3,200 mm Max. cutting depth: 50 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 2.2 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Open back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 4.300 x 1.910 x 1.250 m Weight: 495 KG
I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.
Key data: 4300 mm, 1850 mm
HARWI 1850 Giraffe Vertical Panel Saw Brand: Harwi Type: 1850 Giraffe M-No.: 5008KM Year of Make: 2003 Max. cutting width: 1,850 mm Max. cutting length: 4,300 mm Max. cutting depth: 55 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 3.0 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Closed back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 5,200 x 1,300 x 2,700 mm Weight: 570 KG
Year of construction construction 1983 Drive power Drive power 83 kW Clamping table Clamping table 2500 x 2500 mm workpiece mass on table Workpiece mass 20 t Processing width on table 5770 mm Processing height on table 2800 mm processing depth 1985 mm Spindle diameter Spindle diameter 200 mm Slide cross-section Slide cross-section 530 x 550 mm Additional equipment Angle head large Angle head small
Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scorin ...
sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...
Key data: 4200 mm, 115 mm
Panel Saw with Lift Table Loading Scheer Type: PA 7004 Year of Make: 1999 CE with automatic lift table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, Linux operating system with PA software S5 Cutting length 4200 mm Travel of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade protrusion 135 mm Panel Saw Size FM22 Main saw blade diameter maximum 450 mm Scoring saw blade diameter maximum 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher 30 m/min in the flow, 70 m/min in the return. Remaining section device SP5004 Saw motor 11 kW, scoring 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lift table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front Air Cushion Support Tabl ...
Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm
SPECIFICATIONS: Workspace: Horizontal cutting length mm: 6000 Vertical cutting height mm: 2200 Workpiece height mm: 78 Saw blade diameter mm: 300
Key data: 6500 mm, 100 mm
Horizontal panel sizing saw Longitudinal saw with 6,500mm cutting length Panel dimension 6,300mm Main saw motor 35KKW frequency-controlled Feed speed saw carriage 5-80m/min. Max. saw blade diameter 550mm with 130mm protrusion Saw blade deviation sensor Cut-gap closers Pressure device 2,600 - 100mm Material tray 6,300mm Extension to 10,900mm 9 Parcel jammers 4 Cross aligners Pressing device 100- 2,600mm, approx. 2,000mm behind the cutting line Pressing device 100- 2,600mm, approx. 4,000mm behind the cutting line Electronic Control PC6200 Machine Tables Air Cushions with Steel Nozzles 1 angle table 2,600x1,000mm with angle stop rail 4 side table 2.600x800mm More information on request!
Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)
M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves
New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm
Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost
Monitor with control panel, 2TT1001KAN03C, Unipo, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Consists of: - Monitor 2TT1001KAN03C, - Operator panel 7BXCTRLP000B, - bezel 7FPX0995X500, Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.
Control panel fire alarm center GE-1X-F2-04 for sale, with original packaging
We offer various transfer panels for sale. Our transfer panels are made of stainless steel and equipped with butterfly valves, of course food-safe. Partially equipped with sensors. Currently still in stock: 2x DN80 and 1x DN65 The transfer panels were most recently used in the dairy industry.
JRIMAC Circular Saw/Multifunction Saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left – right/ right – left - Flexible and rational working - Air cushion table for pleasant processing of sheet goods - 90° – Stop ruler for cross-cut cuts - Collets for optimal processing of sheet material - Force-guided pneumatic hold-down device with zero-cutting device - Various options for incision initiation - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade – quick clamping system "JRIMAC" - High level of occupational safety -Friendly - Cutting accuracy +/- 0.5 mm
Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm
- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm
Electrical panel with power distribution switches to machines.
Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning
BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item Condition: Used H2R3C11_2_RD
The scope of delivery includes: 01x Fluted steel panel, used Manufacturer: SSI Schaefer Material colour: sendzimir galvanized for frame depth: 850 mm Total length: approx. 850 mm Total width: approx. 150 mm Total height: approx. 11 mm Center-center hole: approx. 780 mm Material thickness: approx. 1.3 mm Weight | Pcs.: approx. 1,930 kg Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm
For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. Infeed with 5th flap at the bottom in advance Max. grouping of 6 products, each 3 products rotated by 180° Infeed capacity max. 140 cartons/min. Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 Operator terminal Pester Micro-Panel 10,4 Programmable control system Bypass function 2.586 operating hours Drive 400V/50Hz
Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm
maximum number of results exceeded
please refine your search
