1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: used
Price: 2.500 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

FESSMANN Gas boiling pans plant Technical data Type: NOVA 809 400 litres Nominal heat: 40.9 kW digital control 230V / 50 Hz / 6A Boiler complete stainless steel! Thermodeckel Gas heating: natural gas Dimensions: x B130 height 126 cm x D with closed lid H110 Basin size: H46 x B110 x t 80 cm B / No.: 97/143 According to previous owner new burner installed in 2012 Control: Fessmann DP K See pictures original condition & accessories! Very good and well maintained condition. The engine has been serviced regularly by the Fessmann customer service and was until recently in operation. If you have questions, email or call. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

4 heatingzones each 15 KW = 60 KW\r\nfat basin stainless steel\r\naccessories: output\r\n deep fat frying device incl. conveyor\r\n and 2 turning system\r\n electrical panel more

New in: 2006
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904631 Number: 1 PCs. Manufacturer: MONFORTS Type: MHC pickup Control: Siemens 840 D powerline Year of construction: 2006 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION TURNING Maximum turning diameter 390/520 mm Maximum swing over bed cover 560 mm Max speed main spindle 4000 1/min Maximum performance main spindle in ED 10-40 / 100% 31/21.5 kW Maximum torque of main spindle in ED 10-40 / 100% 635/424 NM Main spindle spindle passage 86 mm Part clamping cylinder to the main spindle Turret top Number of stations of which powered 12/12 Tool holder in the VDI 40 turret The turret of X/Z axes Direct measuring sy ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

electronic control panel,\r\ntemperature range -20 ° bis + 50 ° C\r\ncabinet for 2 trolleys plates 60 x 80 cm\r\ninside + outside stainless steel\r\ndimensions inside T 2.960, B 1.220 mm, H 2.600 mm\r\n more

New in: 2012
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904591 Number: 1 PCs. Manufacturer: CHIRON Type: FZ 15 FX Magnum high speed Control: HEIDENHAIN iTNC 530 Year of construction: 2012 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 730 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 60/60/60 m / min Direct measuring system Tool holder HSK-A 63 Maximum speed milling spindle 18000 1/min Maximum power with ED 10-40 / 100% 58/42 kW Maximum torque at ED 10-40 / 100% 70 nm Chain-type tool magazine 48 stations Rotary table Swivel unit NC-controlled Swivel range +110/-130 degree 2 PCs. NC-controlled rotary table Rotary tab ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

include \r\nfeeding conveyor\r\nprecrusher\r\ntransportpneumatik\r\nswing-screen-dryer \r\nexhaustair-filterstation\r\nheating system/heat exchanger\r\nheat recovery \r\npipelines\r\nbreadcrumbmil\r\nbuffer silos\r\nswitch box/electrical panel\r\n more

New in: 1998
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904814 Number: 1 PCs. Manufacturer: HELLER Type: MCP-H 250 Control: Uni-Pro CNC 90 Year of construction: 1998 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 800 mm Travel in Y 800 mm Travel in Z 710 mm Maximum rapid traverse in X/Y/Z 36/36/36 m / min Maximum feed speed in X/Y/Z 36/36/36 m / min Direct measuring system X/Y/Z Tool holder SK 50 Maximum speed milling spindle 6000 1/min Maximum power with ED 10-40 / 100% 50/28 kW Maximum torque at ED 10-40 / 100% 955/536 NM Spindle diameter in front bearing 100 mm Chain-type tool Magazine 52 stations Max tool diameter 112 mm Max tool diamete ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n more

New in: 2008
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904843 Number: 1 PCs. Manufacturer: Long Type: MC 500 Control: Siemens 840 D solutionline Year of construction: 2008 State of preservation: second-hand machine Machine a (hours): 1,000 DESCRIPTION MILLING Travel in X 500 mm Travel in Y 500 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 40/40/40 m / min Direct measuring system X/Y/Z/A/B Tool holder HSK 50 E Maximum speed milling spindle 30000 1/min Maximum power with ED 10-40 / 100% 16,6 kW Disc tool Magazine 30 stations Max tool diameter 50 mm Maximum tool length 200 mm Rotary table Swivel unit NC-controlled Swivel unit with counterbearing Range of-110 to + 20 degrees NC-controlle ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

- 2 heads machine\r\n- 10 rows\r\n- year 2010\r\n- weight range 50-200 g\r\n- products length: 90-200 mm \r\n- touch panel control Siemens more

New in: used
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904847 Number: 1 PCs. Manufacturer: ABA Type: Ecoline 1206 ES Control: Abamatic 1 N.D.. Year of construction: 1998 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION SURFACE AND CREEPFEED GRINDING Max grinding length 1250 mm Max grinding width 600 mm Grinding height 700/775 mm Maximum Absstand table spindle Center 700 mm Diameter x width x bore grinding wheel 400 x 60 x 127 mm Max RPM 2600 1/min Maximum power with ED 10-40 / 100% 11 kW Workpiece table with magnetic clamping plate 1250 x 600 mm Table Dresser MORE FACILITIES Splash Panel with partially full work room Coolant system with paper band filter COMM ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Ø fan 700 mm, 1340 rpm\r\nsuction.- or pressure side with protection grid\r\nwidth 900 x deepnes 610/870 x height 940 mm\r\n more

New in: 2013
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904877 Number: 1 PCs. Manufacturer: TRAUB Type: TNL 32/9 Control: Traub TX 8i-s Construction year: 2013 State of preservation: second-hand machine Control a (hours): 33.200 Spindle a (hours): 8.150 DESCRIPTION TURNING Max speed main spindle 1/min 8000 Maximum performance main spindle in ED 10-40 / 100% 10.7/6.7 kW Maximum torque of main spindle in ED 10-40 / 100% 32/21 nm Main spindle spindle forward 32 mm Axes on the main spindle unit Z/C Workpiece spindle hub spindle (lathe/short screwdriver) 305/127 mm Maximum rapid traverse in X/Y/Z main spindle unit- / -/ 20 m / min Hollow clamping cylinder to the main spindle Max speed 6400 1/min spindle ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 240 kg dough, safety device\r\n foil panel/key pad (Folientastatur), 2 speeds, \r\nhydraulik fixing the bowl\r\ntools/wendlarms stainless steel\r\naccessories: scraper with temperature sensor\r\n 2 stanless steel bowls\r\n more

New in: 2012
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904878 Number: 1 PCs. Manufacturer: TRAUB Type: TNL 18/9 Control: Traub TX 8i-s Year of construction: 2012 State of preservation: second-hand machine Control a (hours): 35.900 Spindle a (hours): 9.350 DESCRIPTION TURNING Max speed main spindle 10000 1/min Maximum performance main spindle in ED 10-40 / 100% 3.7/2,2 kW Maximum torque of main spindle in ED 10-40 / 100% 23.5/14 NM Main spindle spindle forward 20 mm Axes on the main spindle unit Z/C Workpiece spindle hub spindle 205 mm Maximum rapid traverse in X/Y/Z main spindle unit- / -/ 40 m / min Hollow clamping cylinder to the main spindle Maximum speed spindle 10000 1/min Maximum performanc ... more

New in: 2007
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 425 E Year of construction 2007 Hours of operation 33,959 hours Press power 100 tons (120 tons at 300 bar) Specific press capacity 121,1 tons/m² Feed channel 2,000 x 1,020 mm (l x w) Throughput rate under operating conditions 375 m³/hour Theoretic throughput rate 780 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 45 kW Connected load 108 kW Rated current 210 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 35 kg/cbm approx. 13 tons/hour bulk weight of 60 kg/cbm approx. 22 tons/hour bulk weight of 100 kg/cbm approx. 35 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 3,100 l SPS  ... more

New in: 2013
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904876 Number: 1 PCs. Manufacturer: TRAUB Type: TNL 32/9 Control: Traub TX 8i-s Construction year: 2013 State of preservation: second-hand machine Control a (hours): 31.350 Spindle a (hours): 8,100 DESCRIPTION TURNING Max speed main spindle 1/min 8000 Maximum performance main spindle in ED 10-40 / 100% 10.7/6.7 kW Maximum torque of main spindle in ED 10-40 / 100% 32/21 nm Main spindle spindle forward 32 mm Axes on the main spindle unit Z/C Workpiece spindle hub spindle (lathe/short screwdriver) 305/127 mm Hollow clamping cylinder to the main spindle Max speed 6400 1/min spindle Maximum performance counter spindle in ED 10-40 / 100% 5,5/3,7 kW  ... more

New in: 2012
Price: request quote
Location: Land-at AT Österreich
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Type Konti 275 GS Year of construction 2012 Hours of operation 11,785 h, stand April Press power main press 80 tons Specific press capacity 97 N/m³ Idle volume capacity 590 m³/hour Capacity at 35kg/m³ approx. 360 m³/hour Feed channel 1,750 x 1,020 mm Capacity per cycle time 2 m³ Bale size 750 x 1,100 mm, length variable Driving motor 55 kW Connected load 72 kW Total rated current 130 A Back-up fuse 160 A Tying system 5 fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller (manuf., type) Siemens Simatic S7 300 Operating panel (manuf., type) Siemens Multi Touch Panel Baler dimensions built up with ho ... more

New in: 1997
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904887 Number: 1 PCs. Manufacturer: INDEX Type: V 200 tandem Control: Siemens 840 C. Year of construction: 1997 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION TURNING Maximum turning diameter 160 mm Max workpiece length 200 mm Maximum swing over bed cover 250 mm Maximum Chuck diameter 200 mm 2 main spindle/n Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 28/20 kW The main spindle unit of X/Z axes Travel in X/Y/Z main spindle unit 520 /-/ 200 mm Direct measuring system main spindle unit in X Gun down Number of stations of which powered 14/0 Tool holder in the turret V ... more

New in: 2012
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Presto Typ HPK 50 HS Year of construction 2012 Hours of operation 3,058 hours Press power 50 tons Specific press capacity 752 kN/m² Feed channel 1,600 x 650 mm (l x w) Capacity per cycle time 1,06 m³ Theoretic cycle time 19 sec. Bale size 700 x 950 mm (w x h) Driving motor 30 kW Rated current 56 A Tying system 4-fold horizontal, fully automated Throughput rate at a bulk weight of 35 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 8,8 tons/hour bulk weight of 100 kg/cbm approx. 12,7 tons/hour Bale weight approx. 450 kg, depending on material SPS controller (manuf., type) Siemens S7 1200 Operating panel (manuf., type) Siemens SIMATIC Touch Space required 9,920 x 2, ... more

New in: 2009
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904873 Number: 1 PCs. Manufacturer: MÃ?GA Type: GT 3-42 Control: Syntec 900 TE Year of manufacture: 2009 State of preservation: second-hand machine DESCRIPTION TURNING Maximum turning diameter 100 mm Maximum turning length 100 mm Max speed main spindle 4000 1/min Maximum performance main spindle in ED 10-40 / 100% 7,5 kW Main spindle spindle passage 42 mm Linear tool carrier for 5 outdoor and 4 indoor processing tools The linear tool carrier X/Y/Z axes Travel (x/Y/Z) 135/280/250 mm Rapid traverse rate 17.5 m / min MORE FACILITIES Splash Panel with fully encapsulated workspace Lighting in the work area Chip conveyor Machine is / ... more

New in: 2010
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Kampwerth / Presto Typ HPK 50 BSK Year of construction 2010 Hours of operation 7,234 hours, stand 09/2018 Press power main press 50 tons Feed channel 1,250 x 1,050 mm (l x w) Capacity per cycle time 0,96 cbm Theoretic cycle time 22 sec. Theoretic throughput rate 157 cbm/h Bale size 1,100 x 700 mm (w x h) length adjustable Driving motor 22 kW Connected load 31,5 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 4,4 tons bulk weight of 50 kg/cbm approx. 6,3 tons bulk weight of 100 kg/cbm approx. 9,9 tons Bale weight up to 550 kg, depending on material Volume hydraulic oil tank 400 L SPS controller (manuf., type) Siemens S7 200  ... more

New in: used
Price: request quote
Location: Land-de DE 68642 Bürstadt-Bobstadt
Seller: EnTeHa GmbH & Co KG

Spare parts support: No. 4379: 1 gebr. Post assemblies to serial. RAMBAUDI, Rammatic 1201, type b. with HEIDENHAIN iTNC 530 Accessories: 1. milling head SK 50 / 22 kw / 3,600 - 40 min-1 2. clamping table with T-slots and grid plate 3500 x 1000 3. 30-fach tool magazine CANI 4. chip conveyor - INDASS. Type TPF, 5 Control Panel iTNC 530 - BJ. 2010 6 electronic Handwheel 7 measuring system / glass scale HEIDENHAIN LS 706 C / ML 2840 mm 8 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1140 mm 9 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1440 mm 10 Panel with various assemblies 11 feed / servo - motor SIEMENS more

New in: 2018
Price: request quote
Location: Land-sl SL Slowenien
Seller: OBM Recycling Machinery B.V.

Manufacturer ANIS Trend d.o.o. Type ATS110-75D 60 tons Year of construction 2018 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throughput rate under operating conditions approx. 235 m³/hour Bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l) Driving motor 45 kW Oil cooler 1,5 kW Oil heater 2,0 kW Main Electric power 400 V / 50 Hz  ... more

New in: used
Price: used machinery auction RESALE 105 €
Location: Land-at AT Würtzlerstraße 15 , 1030 Wien, Österreich
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Cooling Panel sideboard RCD gastro Infrico ME14702P Table-top model, CrNi, approx. 470 x 700 x 850 mm, 2-door, for sheet metal tray-B approx. 325 mm, 3 PCs. height-adjustable pads, 550 W, REFRIGERANT R134a, pool size approx. 830 x 530 mm pitch to hang by gastro norm containers, including in the Cabinet standard containers partly with Cover, pool with 2-piece lid, lockable more

New in: 2009
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ Impress D130-110-B-5/5-1.6 Year of construction 2009 Hours of operation 15,576 hours Press power main press 127 tons Specific press capacity 10,5 kg/cm² Working pressure 280 bar Feed channel 1,620 x 1,000 mm (l x w) Press volume / cycle 4,1 cbm Throughput rate under operating conditions Up to 865 cbm/h Cycle time under operating conditions 22 sec. Press stroke 2,900 mm Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 17 tons/h bulk weight of 50 kg/cbm approx. 29 tons/h bulk weight of 100 kg/cbm approx.  ... more

New in: used
Price: request quote
Location: Land-at AT 3100 St.Pölten, Porschestr. 23a
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Cooling Panel sideboard RCD gastro Infrico ME14702P Table-top model, CrNi, approx. 470 x 700 x 850 mm, 2-door, for sheet metal tray-B approx. 325 mm, 3 PCs. height-adjustable pads, 550 W, REFRIGERANT R134a, pool size approx. 830 x 530 mm pitch to hang by gastro norm containers, including in the Cabinet standard containers partly with Cover, pool with 2-piece lid, lockable more

New in: 1991
Price: request quote
Location: Land-ru RU Russland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1991, 2017 overhauled Hours of operation 40,586 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., typ ... more

New in: 2014
Price: 3.350 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Freezing cell with Rivacold monoblock Technical data: Cold ambient temperature:-5 to-24 ° C Dimensions exterior: Hxwxd = 230 x 230 x 290 cm Wall thickness: 10 cm Dimensions in: Hxwxd = 210 x 210 x 270 cm with door heater Floor plastic incl. Unit, evaporator, control as a mono block Refrigerant R404 A / CFC-free! Cell is disassembled and ready to ship See State original images! Unfortunately, the right ceiling panel has damage to the rear, upper right corner. If you have questions, email or call. more

New in: 2011
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Strautmann Typ Bale Tainer Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler dimensions built up with hopper approx. 8,841 x 3,140 x 3,100 mm (l x w x h) Transport dimensions only baler approx. 5,650 x 2,100 x 2,850 mm (l x w x h) Machine weight baler 7,38 tons Comments: Inspec ... more

New in: used
Price: 495 €
Location: Land-nl NL 7544c Enschede, ypelobrink 96
Seller: DutchMach

CROSS TABLE -Afmeting 600 x 240 mm -Panel verplaatsing 400 x 150 mm DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border) more

New in: 2012
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer HSM Typ 2012 Year of construction 2012 Hours of operation 3.052 h Press power main press 24 tons Specific press capacity 42,9 kN/cm² Feed channel 1,150 x 1,000 mm (l x w) Theoretic throughput rate 214 cbm Theoretic cycle time 42,9 sec. Bale size 700 x 800 mm (w x h) length adjustable Driving motor 15 kW Tying system 4-fold horizontal, fully automated Bale weight Up to 300 kg, depends on material SPS controller (manuf., type) Siemens S7 200 Operating panel (manuf., type) Siemens SIMATC Panel Baler dimensions built up with hopper approx. 7,400 x 8,500 x 2,650 mm (l x w x h) Transport dimensions only baler approx. 7,400 x 2,300 x 2,650 mm (l x w x h) Machine weight baler 4,8 tons  ... more

New in: 2000
Price: request quote
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Working centre ESSETEAM model SPRINT M12 at 4 axis: - working plane 3000x1200mm - axis run: X=3500 / Y=1750 / Z=200 mm - max panel thickness 120mm - working plane at 6 bars - vacuum pump 100 mc/h - electronic control with PC - safety carpets on machine front Working groups: - vertical spindle HP 10, attachment ISO30, with inverter 1.000 - 18.000rpm, with 4° rotary "C" axis, served by automatic tools changer at 8 positions and by back tools changer at 3 positions for angular heads - boring unit with 7+7 vertical chucks (X+Y) 2+2 horizontal chucks on X (panel heads) 1+1 horizontal chucks on Y (panel edges) currently missing Equipped with: 7 cone ISO30 1 angular h ... more

New in: 2010
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Strautmann Typ Bale Tainer Year of construction 2010 Hours of operation 4.100 hours Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 1,100 x 700 mm (w x d x h) Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 1200 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler dimensions built up with hopper approx. 8,841 x 3,140 x 3,100 mm (l x w x h) Transport dimensions only baler approx. 5,650 x 2,100 x 2,850 mm (l x w x h) Machine weight baler 7,38 tons Comments: The baler is in good condition and after assembl ... more

New in: 2002
Price: 20.500 €
Location: Land-ro RO 41022 Oradea, Calea Aradului, no. 23/39
Seller: Kuhn & Partner Romania SRL

Description Brand Handtmann Model VF620 ID SH5192 Status Active Price 20.500 € + VAT Year of manufacture 2002 Location Bucure?ti / Bucharest (RO) Industrial vacuum filler Handtmann VF620 manufactured in 2002 for filling, portioning and twisting natural or artificial membranes, with a 240 liter hopper. Tehnical characteristics: servo tehnical transmission, backward suction, Monitor control panel with Windows CE operation system and weight compensator, AC servo-motor, filling capacity: up to 6000 kg / h, portioning interval: 5 - 100 000 g, weight compensation for the first portion, electric pulse control for the clippers, filling pressure: 40 bars, power: 8 kW, feed rate: up to 700 ... more

New in: 2009
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Hours of operation 52.810 h, stand January 2018 Press force main press 100 tons Specific press force 145 N/m² Max. cutting force 120 tons Press force free stamper 25 tons Feed channel 2,000 x 1,020 mm (L x W) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/h Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW Rated current 280 A Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 20 to 30 kg/cbm up to 15 tons/h bulk weight of 35 to 50 kg/cbm up to 23 tons/h bulk weight of 60 kg/cbm up to 27 tons/h bulk weight of 100 kg/cbm up to 44  ... more

New in: 1983
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -mot 3. driven rollers -Machine can be operated in the stand ending or lying position -hydr. Delivery of the bottom rollers -Lift the bottom rollers 140 mm -Shaft diameter bottom rollers / upper roller 90 / 110 mm -Usable wavelength approx. 130 mm -Top + bottom rollers diameter approx. 250 mm -Min. / Max Center distance under. -Harmonic 240 / 400 mm -Distance of the two lower waves about 320 mm -Bending speed infinitely variable approx. 1-6.5 m / min -Maximum bending resistance 30 cc -smallest. Tube diameter 12 x dy 90 mm -Flat steel edge at R 400 100 x 20 mm -L. and t. - iron d 1000 90 x 90 x 9 mm -IPE 160 D 1000 mm -Drive 400 V / 4 kW -with ... more

New in: 2011
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Kampwerth / Presto Typ HPK 50 BSK Year of construction 2011 Hours of operation 6,810 hours, stand 09/2018 Press power main press 50 tons Feed channel 1,250 x 1,050 mm (l x w) Capacity per cycle time 0,96 cbm Theoretic cycle time 22 sec. Theoretic throughput rate 157 cbm/h Bale size 1,100 x 700 mm (w x h) length adjustable Driving motor 22 kW Connected load 31,5 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 4,4 tons bulk weight of 50 kg/cbm approx. 6,3 tons bulk weight of 100 kg/cbm approx. 9,9 tons Bale weight up to 550 kg, depending on material Volume hydraulic oil tank 400 L SPS controller (manuf., type) Siemens S7 200  ... more

New in: 2014
Price: 445.000 €
Location: Land-uk UK 0 Rawdon, The White House
Seller: Euro machines Ltd

3-ROLLS HORIZONTAL HYDRAULIC BENDING ROLL VERRINA MODEL ?LS 95 X 4080 FOR COLD AND HOT BENDING AND FOR THE PRODUCTION OF CYLINDRICAL AND CONICAL PARTS Main features: - Max table length mm 4080 - Max useful length mm 4000 - Upper roll Dia mm 1100 - Max bending capacity (cold) mm 4000x120 - Max pre-bending capacity (cold) mm 4000x100 - Driven lower rolls, each one with nominal torque kg/m 90.000 - Total nominal torque kg/m 180.000 - Nominal speed for roller rotation m/min 2-3-5 - Nominal speed for the upper roll movement upwards: min/max mm/sec 3,5-5,5 - Nominal speed for the lower rolls horizontal movement: mm/sec 5-8 min/max - Max nominal load on the upper roll 2750 - Max  ... more

New in: 2000
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBC 100 K Year of construction 2000 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 720 mm Driving motor 75 kW Tying system 5 fold vertical, 3 fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.. 16 tons/h bulk weight of 50 kg/cbm approx.. 25 tons/h bulk weight of 100 kg/cbm approx.. 47 tons/h Bale weight 550 up to 880 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 11 ... more

New in: 1996
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Pressure capacity 160 t -Working width 3100 mm -Clearance between the stands 2550 mm -Table width 405 mm -Throat depth 350 mm -Height approx. 240 mm -Stroke 175 mm -Working height approx. 865 mm -Motor power approx. 15 kW -Oil approx. 300 l -Space requirement approx. B H 4250 x 2700 X 1900 mm -Weight approx. 9500 kg -with: - swivel arm - control panel with digital display -MOT. Backgauge - 4-way universal die - split foot tool -Two hand control panel with footswitch, more

New in: 2008
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Type Impress D130-110-B-5V-5H-1.6 Year of construction 2008 Hours of operation 24.929 h, Stand Mai Press power main press 127 tons Specific press capacity 10,5 kg/ cm² Feed channel 1,620 x 1,000 mm Capacity per cycle time 4,1 cbm Cycle time under operating conditions 22 sec. Throughput rate under operating conditions up to 865 cbm/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Connected load 155 kW Tying system 5 fold vertical, 5 fold horizontal, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 17 tons/h bulk weight of 50 kg/cbm approx. 29 tons/h bulk weight of 100 kg/cbm approx. 37 tons/h Bale weight up to 1,200 kg Volume hydrauli ... more

New in: 1986
Price: request quote
Location: Land-de DE 76646 Bruchsal - Büchenau, Neutharder Str. 24a
Seller: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

HORIZONTAL MACHINING CENTER TSUGAMI MA 3 H - 10 P - 07-08-006 Shipping time: immediately Number: 07-08-006 Manufacturer: Tsugami Type: MA 3 H - 10 P MACHINE DATA Year of construction: approx. 1986 L x W x h: approx. 4000 x 2400 x 2400 mm Weight: 7000 kg Very good condition - maintained top (Image) TECHNICAL DATA Control: Fanuc 11 - M Procedures: X - axis: approx. 330 mm Y - axis: approx. 250 mm Z - axis: 400 mm Table size: approx 300 x 300 mm Pallet changing station: Number of pallets: 10 units Pallet size: approx 300 x 300 mm Spindle: Speed range: approx. 35-5000 RPM Toolholder: BT 40 Power: approx. 7,5 kW Feeds & express ducts: Feed  ... more

New in: 2006
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Lyndex Typ BIMAX 12/110 Year of construction 2006 Hours of operation 20,661 h, stand Jun Quantity of pressed bales 31,632 piece, stand Jun Press power main press 120 tons Specific press capacity 10 kg/cm² Press power free stamper 24 tons Feed channel 2,000/1,400 x 1,040 mm Bale size 1,100 x 1,100 mm, length variable Driving motor 3 x 45 kW Rated current 260 A Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 20 up tp 30 kg/cbm approx. 10 up to 12 tons/h bulk weight of 50 up to 60 kg/cbm approx. 18 up to 26 tons/h bulk weight of 70 up to 100 kg/cbm approx. 28 up to 40 tons/h Throughput rate with ruffler approx. 10 up to 12 tons/h Bale weight 650 u ... more

New in: 1994
Price: request quote
Location: Land-de DE 57334 Bad Laasphe
Seller: RM-Industrieservice Lager und Büro

Hydraulic 4 rolls bending machine Manufacturer: Davi Model: MCB 3034 Year of construction: 1990 Maximum sheet thickness 20 mm Max sheet width 3100 mm Max on bending capacity 16 mm Automatic, double Prebending Top rollers diameter 340 mm Bottom rollers diameter 310 mm H8rv8s2km Side roller hydraulically adjustable Sheet feed 6 m / min. Engine 25 HP equipped: Prebending automatically Conical bending device Hydraulic folding storage Delivery of hydraulic rollers Operator panel Side rolls adjustable hydraulic Weight: 12,000 kg more

New in: 2008
Price: used machinery auction RESALE 5.000 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

serial number: GA1/002964 Weight approx.: 4000 kg cutting length: 4300 mm control: PC Dimensions (l x w x h) approx.: 12500 x 2500 x 2000 mm cutting height: 105 mm main motor: 15 kW scoring saw: Nein/ No kW software: EASY CUT clamps piece: 8 piece main saw blade: 380 mm air table: 4 lift table: Nein/NO Description: GABBIANI Galaxy 105 Panel Saw & Angular Plant Machine 4 x air tables 2500 mm - label printer - pressure bar and Saw carriage control - 3 pcs. Air tables variable - all 4 air tables with fan - quick-release system Rapid - extra start / stop pedal more

New in: 1992
Price: request quote
Location: Land-de DE 18069 Rostock, Reusenweg 1
Seller: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE

press power max.: 150t working width max.: 4.050mm control unit: CYBELEC DNC 880 width between frames: 3.550mm required power: 18,5kW way back gauge: 1.000mm installation height max.: 430mm back stroke speed: 105mm/s equipment: - 2 cylinder layout Y1 / Y2 - CNC control unit CYBELEC DNC 880 with 2D graphic (new in 2008) - CNC back gauge system in X- and R axis - CNC camber - 3x in front moveable finger stops Z-axis - hydraulic fast clamping of the upper tool - pneumatic fast clamping of the lower tool - manual bottom tool moving with display - 2x movable front lay-on arms with height adjustment - 2-hand user panel with separate foot switch - additional 2-hand user panel  ... more

New in: 2014
Price: used machinery auction RESALE 8.000 €
Location: Land-bg BG Bulgaria, 7000 Russe
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 2710 x 1300 x 1560 mm working length x-axis: unbegrenzt mm working width y-axis: 920 mm main spindle: 1,5 kW drilling head vertical x-axis: 5 piece drilling head vertical y-axis: 4 piece drilling head horizontal x-axis: 2+2 piece drilling head horizontal y-axis: 1+1 piece saw unit: x Achse Description: VITAP POINT 2 CNC Machining Centernumber of vertical independent spindles: 8, number of horizontal spindles in X: (2+2), number of horizontal spindles in Y: (1+1), Saw blade unit (diameter 100 mm) max. thickness of the panel 50 mm, control full parametric, max. weight of the panel 25 kgs, max. panel width 920 mm, max. panel size X no limit ... more

New in: 1992
Price: request quote
Location: Land-de DE 41066 Mönchengladbach, Krahnendonk 116
Seller: Oeben Werkzeugmaschinen

used, good condition, eccentric press- and evacuation system with sound insulation Panel. Technical data: Pressure 250 to Height approx. 6 mm number of strokes 15-30 min Shock stroke 400 mm Tappet adjustment 150 mm Adjustment Max 450 mm Table size 1600 x 1250 mm Height 900 mm Main engine 43 KW Weight press without attachments 55 to Dimensions Lxwxh approx. (only press) 3800 x 1800 x 5.800 mm Port 415 Volt more

New in: 2000
Price: used machinery auction RESALE 13.000 €
Location: Land-it IT Italy, 20037 Paderno Dugnano (MI)
Seller: Surplex GmbH

Weight approx.: 10000 kg Dimensions (l x w x h) approx.: 7460 x 5700 x 2700 mm Description: Serial number 3-151 Current 380v 50 Hz, , Power ,26 Kw, Table size 5500 x 1300 mm, Axis stroke ,x ? y 4000 ? 1300 mm, Panel passage 320 mm, Spindle power 3 x 7,5 Kw(10hp), Spindles HSK 63, speed ,600 ? 18000 rpm, External liquid cooling system, Programmable speed axis ,x ? y 56 m/min, Programmable speed axis ,z 22.5 m/min, Vectorial speed ,114 m/min, Frontal tools changer for each spindle ,mod. Rapid 12 with ,12 units, Vacuum pump (mc/h) 300, External protection grid, Working 3 pieces simoultaneously,  , more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: