panel used for sale

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi, control module from automatic cutting machine Bierrebi TA 103 -Circuit board: Type 2.028.01.063.02 -Dimensions: 460/150/H65 mm -Weight: 2.7 kg

Operating unit, operating panel, operating panel, operating unit, foot switch, safety foot switch -Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 -Metal housing: with protective hood -Total dimensions: 500/400/H220 mm -Weight: 6.5 kg

Operating unit, operating panel, operating panel, operating unit, foot switch, safety foot switch -Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 -Metal housing: with protective hood -Total dimensions: 380/180/H165 mm -Weight: 6.7 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16 / P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs. -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 UB 2623/00 -Processor card: Bachmann STU 500 UB 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 ZB 2563/01 -Power supply: Bachmann SNT 411/2 -Card Rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog  ...

Control unit, control panel, control panel, control unit, foot switch, safety foot switch -Foot switch: safety foot switch -Metal housing: with protective cover, die-cast aluminum -Connection cable: 10-pin connector -Dimensions: 400/300 / H115 mm -Weight: 2.9 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card, valve amplifier -Manufacturer: Bachmann, valve amplifier from injection molding machine Battenfeld -Type: CPPV 200 S B 7621/00 -Dimensions: 125/85/H30 mm -Weight: 0.2 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution board, valve amplifier, electronic module -Manufacturer: Bachmann gb, electronics module from injection molding machine Battenfeld -Type: ROB 01 Art.Nr: 2644/00 -Dimensions: 135/80 / H35 mm -Weight: 0.1 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: Bachmann CV 16 P7,5 Art.Nr: 2530/00 -Quantity: 5x cards available -Price per piece -Dimensions .: 145/80 / H40 mm -Weight: 0.1 kg / pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Card slot: Bachmann CST 500 (K1) / DNT B 2636/04 -Busprint: Bachmann BUS 500/1 B 6661/00 -Power supply: Bachmann DNT 90 / UB 6811/00 -Output card: Bachmann CA 16 / P 2.5 SB 6147/00 2 pcs. -Input card: Bachmann CE 32 / 1S B 6144/00 -Processor card: Bachmann CC 11/4 B 6047/00 -Coupling card: Bachmann KOP 500 U / SB 6786/00 -Control card: Bachmann MF 600/1 B 3736/01 -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -An ...

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card, valve amplifier -Manufacturer: Bachmann, valve amplifier from injection molding machine Battenfeld -Type: CPPV 200 KB 2525/00 -Dimensions: 125/82 / H35 mm -Weight: 0.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: CV 4 B 2528/00 -Quantity: 3x module available -Price per piece -Dimensions: 100/60 / H30 mm -Weight: 0.1 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: CV 32 B 2531/00 -Quantity: 6x module available -Price per piece -Dimensions: 100/80 / H30 mm -Weight: 0.1 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card -Manufacturer: Bosch, module from injection molding machine Battenfeld -Valve module: Bosch QV 60 0 811 405 099 -Dimensions: 220/45 / H128 mm -Weight: 0.4kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Cyclus Battenfeld, module from injection molding machine -Type: Cyclus PGA-A MDE-PGA -Quantity: 2x module available -Price per piece -Dimensions: 250/120 / H55 mm -Weight: 0.5 kg / pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

Control panel, operator panel, machine control, monitor -Manufacturer: SIEMENS, Sinumerik Monitor 12 -Type: MAM 3212 -Dimensions: 340/310 / H260 mm -Weight: 9.1 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control of plug-in cards, printed circuit boards from injection molding machine -Power Supply / Converter: Elba euro module PCD 315 CP -Insert card: Krauss Maffei KR100 -Plug-in card: Krauss Maffei PV104 -Insert card: Krauss Maffei LV100 2 pcs. -Installation card: Krauss Maffei EK200 -Insert card: Krauss Maffei EK100 -Plug-in card: Krauss Maffei SP400 -Installation card: Krauss Maffei PR200 -Individual components: see photos -Price / sale: complete -Dimensions: 485/270/320 mm -Weight: 12.9 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal -Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400 -Dimensions: 380/120 / H85 mm -Weight: 1.7 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: Beckhoff, position control type E300 -Connection sockets: only with plug, cable separated -Dimensions: 600/400 / H200 mm -Weight: 18.1 kg

Control unit, control panel, control panel, control unit, foot switch, safety foot switch -Manufacturer: Steute, 2-pedal safety foot switch -Type: C S2 OS/OS -Metal housing: with protective cover, die-cast aluminum -Dimensions: 275/280/H130 mm -Weight: 2.6 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Control comes: from a machining center BJM type ALBZ-145 -Manufacturer: BJM Beckhoff -Dimensions: 603/418/H100 mm -Weight: 16.2 kg

Complete device, compact control, touch screen, control unit, display, operator panel, PLC, Simatic Panel PC -Manufacturer: Siemens -Type: SIMATIC C7-633 DP 6ES7633-2BF02-0AE3 -Dimensions: 240/205/H75 mm -Weight: 1.6 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Hand terminal, hand control device, control unit, control panel, control panel, control unit -Siemens Simatic S5 -OP 393 III -6ES5393-OUA15 -Protection class: IP 50 -including installation frame: 6ES5 982-3UA11 -Dimensions: 148/320/H55 mm -Weight: 0.7 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card -Manufacturer: Bachmann, analog distribution card from injection molding machine Battenfeld -Type: CVA500 CV-A500 B2532 / 00 -Number: 4x control card available -Price per piece -Dimensions: 160/100 / H40 mm -Weight: 0.2kg/pc.

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

plate width: 1000 mm plate depth: 700 mm plate height: 2000 mm weight of the machine ca.: 1800 kg required space: 1000 x 700 x 2000 mm The GERD WOLFF clamping bracket, with overall dimensions of 1000 x 700 x 2000 millimetres, is equipped with a T-slot plate. If you have not found the size you require, you can also send us an e-mail with the completed PDF form. We can use this to produce a customised panel for you. T-slots - width: 22 and 38 millimetres Panel thickness: 50 millimetres Number of grooves: 8 Surface finished according to DIN 876/III Weight: 1800 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterised by lamellar graphite, is characterised by high thermal conductivity, excellent damping properties and good dimensional stability. This material also combines good machinability with high compressive strength and vibration-damping properties. EN-GJL-250 is particul ...

Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Ang ...

German mechanical sheet metal bending machine The bending machine allows you to bend sheets with a width of 3000mm and a thickness of 6mm. It is controlled by a foot pedal and a touch panel, electronic settings of the bending angle, the ability to enter programs for the movement of the bumper and the bending angle, the ability to work in automatic cycles. Equipped with an electro-mechanical backgauge device with digital position value setting. Technical data: - Bending length: 3000 mm - Maximum thickness of the bent sheet: 6 mm - External dimensions of the folding machine (L x W x H): 4550 x 950 x 1850 mm - Machine weight: 8900 kg . Equipment : - Touch control panel. - Control pedal. - Electro-mechanical rear stop device with digital position value setting. - Additional new bending bars. - DTR manual.

hydraulic cylinder 2011 brand MG four mod rollers with control panel. MH-345 G 3100 mm long, 45 mm curved veneer and 35 mm thick pre-curved, steel with a yield strength of 260 N / mm2, equipped with hardened rollers, control panel with 2 displays, dimension attached to the machine and hydraulic curved device conical. Bending length: 3100 mm Bending capacity: 45mm Pre-bending capacity: 35mm Top roller diameter: 480mm Bottom roller diameter: 440mm Side roller diameter: 370 mm Power: 40 HP Approximate weight: 29,000 kg. Overall length: 6140 mm Width: 2695 mm Height: 2450 mm Working height: 1860 mm The maximum capacities refer to the ferrule diameter equal to or greater than 3 times the diameter of the top roll to yield materials in the range = 260 N / mm.

Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...

We are selling blow molding machine Voith fisher maximum capacitity 100 Liter. We put on the machine new extruder 80mm with new gearbox, heaters and motor 37kw,also new accumulation head is instaled capacity 5 liter. Machine have new pneumatic, new electric cabinet with plc and main control unit with 15 inch touch panel. Also machine have new plc with 7 inch touch panel for wall thickness control.

ILLIG SB74 C 9 Thermoforming and punching machine Vacuum forming and punching machine for plastics. Workbench maximum 505x775 We have shutters to change the dimensions, 770x455, 400x770, 340x770 The maximum height of the die (mold) 100mm Film thickness 0d 0.15 -2.0mm Year of production 1985 - in 2019 it underwent a comprehensive modernization of automation (diagrams in the pictures) Visible in the photos. (control cabinet, controller, touch panel.) 400V power supply Input power:11.2 kW completely new drivers and diagrams. modernization completed in August 2019 since then machine worked approximately 6000 hours panel has English and Polish languages

The sale is intended for the entire brewery in the body, only and exclusively in the body. Steamed room from two 15hl semi automatic vats Ecobrewtech Touchscreen system control panel with recipe programming Very high precision electronic fiscal meter Cold (glycol) and hot (steam) storage tank of 30hl each. Double stage heat exchanger (cold water and direct glycol) 158hl cellar (2 45hl fermenters, 1 24hl fermenter, 1 29hl fermenter and 1 15hl fermenter) Steam generator year 2020 of 150kg / hour with pressure reducer (low pressure work but also high if necessary) Softener Chiller year 2020 from 23kw Manual 4-jaw isobaric bottling machine, July 2021 Cold room about 30sqm year 2020 Wheeled pump for washing year 2020 Product transfer tubes 2020 Skid 2 pumps for glycol and glycol tank 500lt 2 stainless steel control panels for fermenters control (total 10 slots, 7 active therm ...

Automatic EPS pre-expander This listing includes : 1. Automatic EPS batch type Pre-Expander - Density:7~30kg/m3 - Touch Screen Panel –SCHNEIDER - PLC System –SCHNEIDER - Screw Conveyor and Fluid Drying Bed Model: PSF90 Barrel Diameter: 900mm Effective Volume: 0.6M³ Steam Pressure: 0.4-0.5Mpa Compressed Air Pressure: 0.6-0.8Mpa Production Capacity: 10g/l=100kg/h, 15g/l=200kg/h, 20g/l=330kg/h, 30g/l=400kg/h Foaming Density: 8-30KgKg/m³ Density Tolerance: ≤3% Installed Power: 4.5kw External Dimensions: 1600 x 1900 x 2500mm Installed Weight: 1000kg Other Features : - Chromeplate makes non-adhesion of the bearing. - The solid bearing is made of heated steel. - The heating treatment bring the steel a high strength, non-deformation and high resistance to the expansive force from high-density products. - Density:7~30kg/m3 - Density tolerance: no more than 5%  ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideHSC75 linear 5-Axis SpecificationHSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilti ...

Code: 0201 Brand: SACOT Model: TR DO PL MO7 - CE Standard 90° automatic transfer of workpieces back to the operator, applicable to various processing machines, also for metal, plastic or leather processing - CE Standard - Year 2008 Technical data: Max panel width 1300 mm Panel feed via motorised belt Wheels for movement Overall dimensions mm 4100 x 2200 x 2700 Weight kg 1500

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Weinig PowerCom Weinig Powermat 500 for window production --------------------------------------------- Machine will be checked at our warehouse Short summary: --------------------------------------------- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: --------------------------------------------- Tool arrangement No. 018 for window production Technical specifications: --------------------------------------------- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120  ...

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vacuum pumps Multiple chuck drilling head Movable control panel NUM1040PC control unit with Xilog Plus and Telesolve 3 safety mats Mesh protection perimeter Automatic slide lubrication Our in-stoc ...

Key data: 2555 , 10500

2 x Jenbacher JMS 616 GS-N.L for sale. These 616 are 2,555 kW. The thermal heat capacity is stated at 24% as the original project was only using the engine jacket water heat. If an exhaust gas heat exchanger is added this will increase the heat output by a further 1321kWt which would increase the overall efficiency to 86% from 65%. Make: Jenbacher Model: JMS 616 GS-N.L Capacity: 2,555 KW Year: 2010 Hours: 0 Fuel: Natural gas V: 10.5KV HZ: 50 Scope of Supply: Engine, Alternator, Base Frame, Control Panel (Di.Ane XT3), HV Surge Suppressor panels, Catalyser pipe, Water jacket heat exchanger, Gas train, Gas booster, Synchronisation panel, Pumps, Other ancillaries. Please note: No container, no cooling radiator. Price: €500,000 each

As good as new machine with very few operating hours (built in 2020). This like-new, very powerful, fully automatic shrink wrapping machine works with a permanently heated longitudinal and a cycled transverse welding, which offers at least 3 undeniable advantages: • No length limit of the product to be packaged • Significant increase in production capacity • Cost savings due to less film waste • Machine dimensions: 2180 x 1545 x 1525-1655 mm • Dimensions welded frame: 500 mm/length unlimited • Max. product height: 200 mm • Max. film roll width: 600 mm • Max. ø film roll: 350 mm • Production capacity: 600-4200 per hour (depending on product size and material) • Belt speed: 10-30 m/min • Power rating: 380-415V /3ph/ 50/60Hz • Consumption: 2300W • Continuous longitudinal seam with permanently heated transverse welding • Welding beam for longit ...

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

GeneralHorizontal machining centre - Horizontal milling head; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BRotary pallet storage RS 12Rotary pallet storage RS 12 incl. 10 ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...