panel used for sale

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Display, display module, display panel -Manufacturer: Regloplas, display panel type RT45-Geh -Art. No.: 45750 -Dimensions: 130/100/H100 mm -Weight: 0.9 kg

Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Limat, control panel -Type: RT 280-6 -Dimensions: 370/60/H220 mm -Weight: 2.3 kg

Convotherm OES 10.10 combi steamer electric - with base - Disappearing door - door disappears to the side of the damper when opened 10 bays GN 1/1 Functions: Steam, Combi Steam, Hot Air Crisp&Tasty USB interface integrated in the control panel Standard equipment Steam (30-130°C) with guaranteed steam saturation Combined steam (30-250°C) with automatic Humidity adaptation Hot air (30-250°C) with optimized Heat transfer easyDial control panel Digital Display Regeneration Function ProductsRegenerate 99 cooking profiles, each with up to 9 steps Multi-point core temperature sensor Door handle with safety lock, preheating and cool-down function Metrics: Height with base: 182cm x Width:94cm Door pushed to the side: 103cm x Depth:82cm + 8cm handle Device is fully functional Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176  ...

washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.

offer 22460 Specifications: - Printing capacity 120 t - Working width 2520 mm - Passage between stands 2150 mm - Table width 220 mm - Projection 240 mm - Installation height approx. 400 mm - Ram stroke 160 mm - Working height approx. 900 mm - Engine power approx. 11 kW - Oil filling approx. 120 l - Space requirement approx. W 2750 x H 2600 x D 1900 mm - Weight approx. 7000 kg - with: - Swivel arm – control panel - Digital displays for offset -Mot. Backgauge with display - Universal die, split sharpening tool - Two-hand control panel, foot switch, 2 support arms

GeneralHorizontal Machining Centre in travelling column construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical100000/100000/100000 mm/minRapid traverse longitudinal/transverse/vertical100/100/100 m/minWorking area 1Longitudinal630 mmCross800 mmVertical750 mmIntegrated motor spindle speedMASTER®Drive power (100% DC) 30 kWDrive power (40% DC) 46 kWTorque (100% DC) 130 NmTorque (40% DC) 200 NmSpeed range - 15000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 400 kg / 882 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z - axis 630 x 800 x 750 mm/24.8 x 31.5 x 29.5 in axis kinematics A / B (basic machine without NC rotaryClamping hydraulics 2/4 channels f. working tabl ...

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Fagor cut-to-length high speed line 72'' x 0.135'' x 60,000Lb is machine for cut to length coil metal cutting into metal sheets of required sizes. This machine can be used by coil metal working companies to make preparatory works before main operation. Machine is equipped with feeding unit and acceptance table to make all the process maximum automatic. It allows to make high speed cutting about 200-250 meters per minute. Cutting speed depends on metal thickness you work with, kind of metal, maximum metal cutting width. This machine helps to make preparatory works maximum fast and automatic, saving your time and labor, reduce expenses costs. Machine is equipped with flying shear so help you to save factory space avoiding loop system installation. 72″ x .135″ x 60,000Lb Fagor CTL Line Make: Fagor Year: 2003 Material Width: 12″ – 72″ Material Thickness: .020″ – .13 ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

Manitowoc Multiplex MB-8-1PP Slush Machine Ice Cream Machine Manitowoc Multiplex MB-8-1 Beaker Mixing Workstation Properties: Mix and serve directly in the cup. Improve consistency, control product costs, reduce waste, labor, and serving time. Automated features to complete the entire beverage preparation process – right in the cup! Built-in Nugget Ice Cream Maker The built-in Nugget ice cream maker is the perfect ice cream for all kinds of specialty beverages, ensuring high beverage capacity during peak hours. The ice maker covers a large ice demand within 24 hours. Built-in cooling for storage and dispensing system Exclusive easyToUCH™ control Easy-to-use, icon-based touchscreen controls simplify beverage preparation and inventory management. The control panel provides visual training, cleaning, maintenance, and data collection information. With the icon-based easyToUC ...

Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 2.45m x 2.1m Total weight: 3460KG Equipment On-screen text german Compact Flash Drive Core pull hydraulic 2x Air ...

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

Injection moulding machines Dr. Boy Boy 55 A Stock No.: 503233 Manufacturer: Dr. Boy Type: Boy 55 A Control: Procan Year of construction: 2003 Operating hours: 64000 h Technical data closing page Clamping force: 550 kN Holmass v: 360 mm Holmass h: 335 mm Panel size h: 530 mm Panel size v: 500 mm Installation height min.: 250 mm plate pitch max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 42 kN Technical data spray side Screw diameter: 32 mm Displacement: 76.5 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.25m x 1.09m x 2.04m Total weight: 2250KG Equipment On-screen text german Core tension hydraulic 1x Levelling elements

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Specifications: Machine stands over the hallway, does not go into the floor - Printing capacity 400 t - Working width 3100 mm - Passage between stands 2600 mm - Table width 300 mm - Projection 400 mm - Installation height 500 mm - Ram stroke 550 mm - Table height 1000 mm - Drive 400 V / 50 kW - Space requirement approx. W 4100 x H 3800 x D 2200 mm - Weight machine approx. 24800 kg - Weight accessories approx. 1000 kg -with: - Swivel arm – control panel for press depth - Control ATS 460 renewed in 2007 - two-hand control panel, foot switch, - Sharpening tool 2500 mm - V – die 2700 mm - various short press brake tools

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

This delta 703 bundle delivery from 2016 has a working width of 700 mm with 3-fold banding. Equipment: Automatic format recognition and waste sheet recognition Press station with pre-pressing and main pressing, with main press roller Package Pressing Vibrating station Auto. Format Setting Quick Adjustment, Counter, Bar Bundling Package height: min. 20 mm Package height: max. 150 mm Capacity: 600 packets/h per panel Speed: up to 60,000 pcs./h Speed: 15-205 m/min Beidddwlcgh Inlet height: 410mm - 1000mm Electrical connection: 6KW Compressed air: 6 bar dry air, consumption 450 ltr./min. to be provided on site Format min. (without small format device) inlet width 110mm x infeed length 95mm Format min. (with optional small format device not included) Inlet width 90 mm x infeed length 65 mm max. 1 panel 760 mm x 305 mm max. 2 panels 335 mm x 305 mm max. 3 panels 235 mm x  ...

charge load: / : / weight: 720 kg diameter: 1360 mm height: 1200 mm 0: 520 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in th ...

charge load: / : / weight: 340 kg diameter: 960 mm height: 980 mm 0: 219 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in the  ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

charge load: / : / weight: 1350 kg diameter: 1760 mm height: 1240 mm 0: 1210 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in  ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...

Single sided edge bander with squaring device Edges: 0,4 to 12 mm Panel thickness: 10 to 55 mm Min. panel width: 60 mm Feed speed 12,5 m/min Equipment: Squaring device Heating zone Coil- and stripmagazine Glue unit Pressure zone End trimmer Chamfer trimming Mutlifunctional milling aggregate Profile scraping glue scrapers Buffing

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Bridge paternoster / carousel / long goods paternoster for long goods up to approx. 6,60m, 700kg / gondola – used - : Price site: 32.500.-€ (net), plus dismantling etc.! Manufacturer: Schultheis (CH) Type: IPN 11/TL Fab.-No.: 93-03018/2 Year of construction: 1993 Payload per hanger: 700kg Total payload: 7.700kg Number of gondolas: 19 pcs. Connected load: 2x1,5kw, 3x380V Control voltage: 220V, 50 Hz Single-sided tensile force: approx. 20% Dimensions: L=6750mm, W=7750mm, H=4460mm Dimensions of the gondolas: L=550mm, W=6600mm, H=330mm The control system was renewed in 2001 and all documents are available. (Instruction manual and control manual) TÜV and DGUV test reports are available. Load handling device, drive via roller chain with guide rollers for nacelle transport Control: Main control station on the extraction side: electronic panel with dead man's or dea ...

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 2kW / VF1530-2000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 2.0kW - Energy requirements: 15.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Stainless steel: Recommended thickness 6.0mm, maximum thickness 8.0mm - Aluminum: Recommended thickness 4.0mm, maximum thickness 6.0mm - Brass: recommended thickness 4.0mm, maximum thickness 5.0m ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OR 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OR 2kW / VF1530-2000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 2.0kW - Energy requirements: 15.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Stainless steel: Recommended thickness 6.0mm, maximum thickness 8.0mm - Aluminum: Recommended thickness 4.0mm, maximum thickness 6.0mm - Brass: recommended thickness 4.0mm, maximum thickness 5.0mm Structure parts The  ...

Machine Name: Membrane Filter Press Manufacturer: Netzsch Type: 800/64 Year of construction: 1994 Design: Side rail press Diaphragm pressure: 15 bar Filter pressure: 15 bar Press capacity: approx. 960 litres Expiration: Closed Filter area: Approx. 70 m2 Plate size: 800 x 800 mm Number of plates: 64, mixing plate package Panel material: Polypropylene Plate Transport: Automatic Filter cloths: No Filter cloth washer: No Panel package length: approx. 3900 mm Cake thickness: 30 mm Dimensions: L 6100 x W 1300 x H 1900 mm Empty weight: approx. 6000 kg Tech. Documentation: Only for control cabinet / electrical documents Remark: Immediate availability Accessories: One control cabinet, one hydraulic system Condition: Used Price:On request

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...

Machine Name: Chamber Filter Press Manufacturer: MSE Type: KPF 800-43-25K P-L-S Year of construction: 2002 Design: Side rail press Filter pressure: 15 bar Press capacity: approx. 540 litres Expiration: Open Filter area: Approx. 48 m2 Plate size: 800 x 800 mm Number of plates: 44 Panel material: Polypropylene Plate Transport: Automatic Filter cloth washer: No Panel package length: Approx. 2460 mm Cake thickness: 25 mm Closing pressure: 380 bar Dimensions: L 4800 x W 1500 x H 1980 mm Empty weight: 4600 kg Tech. Documentation: Yes Accessories: Control cabinet, a hydraulic system, a light barrier, drip trays, access platform, Netzsch feed pump and 3 x filter cake containers Condition: Used good Price: On request

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 12kW / VF1530-12000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 12.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 35.0mm, maximum thickness 35.0mm - Stainless steel: Recommended thickness 25.0mm, maximum thickness 25.0mm - Aluminum: Recommended thickness 18.0mm, maximum thickness 18.0mm - Brass: recommended thickness 18.0mm, maximum thickness 18.0mm Structure parts The machine is very stable thanks to its welded c ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...

The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive journal and drawing bell, linkage interceptor, centrifugal pump, winch, 4 hydraulic support cylinders, control panel, machine has been completely overhauled (the control blocks have been completely rene ...