panel line used for sale

Technical data Manufacturer: ALZMETALL Model: RFT 3/2 Machine Type: In-line drilling machine Machine number: 58812 Year of manufacture: 2018 Drill heads: 2 x AX 3/SV-500 Drilling capacity steel: up to approx. 32 mm (Source: online) Threading: up to M24 (Source: online) Spindle holder: MK3 (Source: online) Stroke: approx. 120 mm (Source: online) Projection: approx. 300 mm (Source: online) Speed control: infinitely variable (Source: online) Configuration 2 drilling spindles 2 x ALZMETALL AX 3/SV-500 drill heads Electronic speed display Height-adjustable drill tops Coolant Setup Common work table Emergency stop switch Operating instructions available Auction-ID: A7-47277-3105

Benson Self-Leveling Construction Laser - Cross Line Laser with Tripod Features: Self-leveling: +4 degrees /- 4 degrees for high accuracy 3-stage tripod: Flexibility in adjusting the height Laser Class 2: Safe for the eye and extremely accurate Laser range 10 meters: More than enough for most indoor jobs 360 Degree Rotatable Head: Full coverage of the workspace Projects Horizontal and Vertical Lines: Extremely suitable for a multitude of jobs Working time: Up to 10 hours on 2 AA batteries (included) Protection: IP54, suitable for dusty and humid conditions Working temperature: From -10 degrees Celsius to 45 degrees Celsius In a handy storage case: For easy transport and safe storage Adjustable up to 80 cm height and you can also extend it by 32 cm. Keywords: Construction Laser, Self-Leveling Laser, Cross Line Laser, Tripod Construction Laser, Leveling Tools, Measuring Tools, Professiona ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletising and palletising, Unloading capacity: 3600 crates/h, Loading capacity: 3600 crates/h, Power: 21 kW, Voltage: 230/400 V, Frequency: 50 Hz, Compressed air: 6 bar, 30 Nm³/h, Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x ...

Returnable glass bottle filling line, Additional title: Years of manufacture: 1991–1995, Capacity: 50000 b/h, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets, Operation / Control: Siemens S5, Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

Vemag Maschinenbau GmbH linking and hanging line, consisting of: - High-speed length portioning machine, model: LPG209, number: 2090037, year of construction: 2011, 400-460 V, 3 Ph, 50/60 Hz, 9 A, 6 kW, dimensions: 1700 mm x 1000 mm x 1550 mm - Hanging line, model: AH212, number: 2120004, year of construction: 2011, 400-460 V, 3 Ph, 50/60 Hz, 0.5 kW, dimensions: 4100 mm x 770 mm x 1650 mm. - Including crate with parts

Althaus-Waagen mobile 2 lanes lineair weigher, type: Alpha II, machine number: 110.02.00.14, year of construction: 2018, 230/400 V, 50/60 Hz, double infeed lane with plastic belts, belt width: (2x) 230 mm, total dimensions: 1610 mm x 2020 mm x 1585 mm. Including s/s trolley with parts, dimensions: 1700 mm x 1300 mm x 1740 mm.

Handtmann mobile linking and hanging line, consisting of: model: PVLH 241, type: 241-21, number: 878, year of construction: 2016, 400 V, 3 Ph, 50 Hz, 7.6 A, 5 kW, dimensions linker: 2100 mm x 1000 mm x 1400 mm, hanging line, type: 220-16, number: 10702050, year of construction: 2016, dimensions: 2700 mm x 700 mm x 1350 mm.

Newtec linear weigher, type: 2015, serial number: 8448, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 9 A, 1.4 kW, 15 lanes, lane width: (15x) 130 mm, total dimensions: 2700 mm x 1600 mm x 2150 mm. Including 3 elevating infeed belts, plastic belts, belt width: 600 mm, elevating height: 2150 mm, total dimensions elevating infeed belts: 3000 mm x 2400 mm x 2400 mm.

Stork PMT In-line marinating system Valuedrum, model: TB1111, type: 3857819, serial number: 10071881, year of construction: 2009, plastic belt, belt width: 400 mm, total dimensions: 4400 mm x 2250 mm x 2350 mm.

Bosch Sigpack Systems AG robot line dividing machine, type: LDM and TC1-XP, number: J-01659-LDM-042 and TC02075 / J-01659-TRV, year of construction: 2008, plastic infeed belt with dividers, belt width: 120 mm, distance between dividers: 190 mm, divider height: 7 mm, plastic outfeed belts, belt width: 250 mm, total dimensions: 2400 mm x 2400 mm x 2500 mm.

Weber slicer line, consisting of: Weber slicer, type: CCS 904, number: CCS 904-7096, year of construction: 07/2007, 400 V, 50 Hz, 10 kW, plastic infeed belt, belt width: (3x) 70 mm, plastic string outfeed conveyor, belt width: 470 mm, total dimensions: 4900 mm x 2000 mm x 2300 mm, Missing knife, Weber checkweigher, type: CCW, number: CCW 904-7096, year of construction: 07/2007, plastic string conveyor, belt width: 470 mm, total dimensions: 600 mm x 900 mm x 1400 mm, Weber line dividing belt, type: CCR, number: CCR 904-7096, year of construction: 07/2007, plastic string conveyor, belt width: 470 mm, total dimensions: 500 mm x 900 mm x 1400 mm, Weber outfeed belt, type: CCA, number: CCA 904-7096, year of construction: 07/2007, plastic belts, belt width: 590 mm, total dimensions: 8600 mm x 1450 mm x 1700 mm, Pallet with parts.

boring unit with 23 spindles grid 32mm, motor 1,5kW boring unit tiltable 0? to 90? max stroke of the boring unit 80mm table 1000mm x 400mm pneumatic clamping of the workpiece fence left and right manually adaptable with foot pedal

Machine name: Easyweigh LINEAR DOSER FOR BULK Type and model: Easiweigh Vibrating liner weigher Date of manufacture: 2003 Manufacturer: Easiweigh Ltd Country of origin: ENGLAND General description: Feeding lanes (Lanes): 1 Vibrating channels: 2 vibration stages (cascades) to control the flow: a large tray for fast feeding (bulk) and a narrow tray for finishing (dribble), ensuring final accuracy. \"Dimpled\" finish: made of embossed stainless steel (with small bumps) to prevent sticking of wet or juicy products. Controller: A digital panel , Weighing system Individual load cells Bowl capacity 10L Speed ​​Approximately 10-15 weighings/minute Target weight Adjustable, from 500g to 10kg Opening system Pneumatic drive Voltage . 230V AC (single phase), 50/60 Hz Auction-ID: A7-46941-6

Operating voltage: 230 V Frequency: 50 Hz Laser power: 30 W Power consumption: 550 W Table dimensions: 400 x 240 mm Reference: Seitz and Strenger - Lot 2 Auction-ID: A7-46763-104

Machine number: 31601 Operating voltage: 380 V Rated current: 6 A, spindle speed: 16 – 1680 rpm Center length: 550 mm Center height above bed: 140 mm Turning diameter over bed: 280 mm Center height over support: 90 mm Turning diameter over support: 180 mm Spindle passage: approx. 38 mm Equipped with tailstock, Multifix turning steel holder incl. digital display from HEIDENHAIN Reference: Oberthür Auction-ID: A7-46763-346

Serial number: 07510001241 operating hours read: 72,899 Spindle hours read: 39,361 Control: SIEMENS SINUMERIK 840 D Rotation diameter: 640 mm Turning diameter: max. 640 mm Turning diameter Sub-spindle: 400 mm Spindle distance: 1500 mm Turning length: 1185 mm Max. workpiece weight: 150 kg Slide path X1: 550 mm Slide path Y1: 180 mm Slide path Z1: 1185 mm Slide path B1: 240 ° Slide path X2: 180 mm Slide path Z2: 1050 mm Slide path Z3: 1150 mm Spindle speed range: 3200/4000 rpm Rapid traverse speed of slide 1 (X/Y/Z): 40/24/70 m/min Rapid traverse speed of slide 2 (X/Z): 24/36 m/min Rapid traverse speed of slide 3 (Z): 36 m/min Tool holder: HSK 63 Spindle speed: 12,000 rpm incl. the tool holders on the turret incl. bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, Year of manufacture: 2008, Serial number: CNCDB-08.306, Weight: 1500 kg Number of tool positions in the chain magazi ...

A Stalgast wall hood from the Expert Line is offered in an oblique shape for the professional catering and kitchen sector. The hood is designed for use over cooking areas and features a robust, fully folded stainless steel construction. The wall hood is equipped with an LC2 Type A cyclone/labyrinth filter, LED lighting with 230 volts and IP65 protection as well as an internal circumferential grease and condensate collection channel with drain valve. According to the information, the exhaust air compartment is completely airtight. The material thickness is at least 1.0 millimeters. Important data at a glance: Manufacturer: Stalgast Series: Expert Line Device type: Wall hood / Extractor hood Design: Inclined shape Outer dimensions Width: 1,100 millimeters External dimensions Depth: 1,300 millimeters Filter type: LC2 Type A Cyclone/labyrinth filter Comparison designation: like WH 10 Separ ...

Line consists of: - 3x magnetic brake controlled unwinding stand; - 1x Compensator; - 3x Ironing head (including Proras and Isotex); - 3x Drying channel (including 1x Isotex, 2x Brückner); - 3x Grammage meter (without radioactive source); - 2x double cooling roller; - 1x quadruple cooling roller; - 1x Glue station; - 1x Laminating station; - 1x Product wrapper; - 1x Paper wrapper; - 3x Oil circulation pump with control valve (disassembled) - Frequency controlled servo drive (Lenze, 2012) Equipped with touchscreen control. Includes electrostatic filter with accompanying fan; thermal oil pumps; fittings; 5x control box and accessories. The main pipes not included. Required floor space approximately 85x4mtr. Documentation included. Auction-ID: A1-46933-1

max bar length 1200 cm, from 8 to 40 mm diameter Auction-ID: A7-47311-3

OBLIGATION TO TAKE THE WHOLE LOT. For pick-ups, you will have to collect the different elements with trolleys provided. Sold without shelves. Auction-ID: A1-47254-131

Machine number: 0102 Operating voltage: 230 V Frequency: 50 Hz Connection: 100 W Pressure: 0.8-5 bar Internal dimensions: 580 x 500 x 300 mm Reference: Lotec - Lot 222 Auction-ID: A7-46763-355

Machine number: 11790001067 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 100 A Connection: 40 kVA Control: SIEMENS SINUMERIK 840 D Spindle speed: 42,000 rpm Feed in X/Y/Z axis: up to 40,000 mm/min Input fineness X/Y/Z axis: 0.001 mm Rapid traverse in X/Y/Z axis: 40 m/min Displacement measuring system Resolution X/Y/Z axis: 0.001 mm Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm travel X-axis: 200 mm Travel Y-axis: 200 mm Travel Z-axis: 280 mm Tool holder: HSK-32 E incl. 24-fold tool changer Max. tool length from spindle nose: 200 mm Max. tool diameter: 40 mm Max. tool weight with automatic tool change: 1 kg with total tool weight in magazine: 24 kg NC rotary table with swivel axis C-axis Clamping surface: 190 mm diameter Rotation range: 360 ° rotation rotary table: 360 °rotation table: 150 rpm A-axis Swivel range: -5/+130° Loading: max. 10 kg in ...

A Stalgast compensation wall hood from the Expert Line series is offered in box form for the professional catering and kitchen sector. The hood is suitable for use above thermal equipment with an increased fire hazard and has an LC2 Type A cyclone and labyrinth filter. The wall hood is made of high-quality stainless steel, fully folded and has a smooth, easy-to-clean surface. There are air vents on the side walls to compensate for exhaust air and supply air in the room. Condensate and grease are collected in an internal, circumferential collection channel and can be hygienically drained via the drain valve on the side. The hood has LED lighting with 230 volts and protection class IP65. According to the information, the exhaust air compartment is completely airtight. The hood complies with the DIN EN 16282-2 standard.Important data at a glance: Manufacturer: Stalgast Series: Expert Lin ...

The GRAM/HOSHIZAKI BÄKO-Line SKS 64 CCG is a plug-in cream climate cabinet for professional use in bakeries, confectioneries and bakery businesses. The device is particularly suitable for sensitive goods such as cream cakes, cream cakes, desserts and confectionery products, which must be reliably cooled and at the same time gently stored. The special circulating air cooling with suction air ducting reduces a direct air flow to the goods. This allows sensitive baked goods to be better protected from drying out or skinning. The temperature range from minus 5 degrees Celsius to plus 12 degrees Celsius can be controlled via the digital temperature display. The robust stainless steel design of the housing and interior is designed for daily commercial use and can be hygienically cleaned. The cabinet is suitable for trays in the format 600 x 400 mm and is supplied with 10 pairs of support ra ...

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

The SLC-24180 offers the longest stroke of the SLC-24 series with a travel range of 123 mm. It measures 180 × 24 × 10.5 mm and provides a normal force of 30 N. Kit consisting of: 2 linear motors 1 rotary motor 1 controller + cable Auction-ID: A1-47375-5

1 x Triumph 3 a block bottom bag machine for the production of paper bags Year of manufacture 1980, Type 3 a Material: Paper/composites Format: 140-320 mm with three unfolds: Pre-printed bottom cover sheet, self-adhesive bottom cover sheet, In-line coding printer Overall dimensions: approx. 2000 cm long, 390 x 280 cm (W/H) Including: 1 Demag crane, 1 x workstation is equipped with a height-adjustable table, among other things. Auction-ID: A1-47279-62

- It consists of: - VOLCAN extruder. - Cooler with water pump, bowl of dimensions 2500 x 600 x 100 mm. - VOLCAN intermediate belt transfer: total length 1600 mm, belt dimensions 800 x 140 mm, maximum workpiece height approx. 120 mm. - Cutting station: maximum cutting length approx. 3300 mm. - 2 drives that had been added have been removed, but the machine still works. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-7

System consists of 1 x Honsel type: F13, serial number: 4633, Fischer & Kreck, 1 x built in 1957, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories Auction-ID: A1-47279-115

Potato calibration and sorting line consisting of a buffer bunker (trémie), various conveyor belts, calibration section with multiple sorting fractions, distribution module and steel support structure. Suitable for transporting, sorting and calibrating potatoes within a processing or packaging environment. The installation includes: Buffer bunker / storage hopper Various conveyor belts Calibration machine with multiple sorting fractions Distribution and drainage modules Work platform and steel support structure Various electric motors and drives Note: Electric control box/computer not included (if applicable). Visible condition Used condition Normal signs of use Dust and product residues present Operation not tested Dismantling and removal at the expense of the head Auction-ID: A3-43544-34112

Line consists of:, Sugar cube line:, Type: T.T.O.R. 125, Year of construction: 2014, Capacity: 500 kg/hr, Cube size: 10 x 20 mm, Belt width: 295 mm, Drying tunnel: 18000 mm, Cooling tunnel: 4000 mm, Big bag infeed bunker, Capacity: max 1200 kg, Platform height: 1550 mm, Elevating height: 3000 mm, Dimensions: 3100 x 2020 x 4750 mm., Box forming machine, Box size: 210 x 100 mm, Belt width: 100 mm, Dimensions: 1500 x 1400 x 1630 mm, Box closing machine, Belt width: 100 mm, Distance between dividers: 330 mm, Dimensions: 2360 x 700 x 1600 mm

VERY GOOD CONDITION STARTS & DRIVE All vehicles offered in this auction are used and may show signs of wear, age, and usage, including but not limited to scratches, dents, mechanical wear, and other imperfections typical for second-hand vehicles. Buyers are strongly encouraged to attend the viewing/inspection before placing a bid, in order to assess the condition of the vehicle. After purchase, we provide assistance with loading of the vehicle. All items are sold as-is, where-is, with no guarantees or warranties. No complaints or claims will be accepted after the purchase is completed. Auction-ID: A7-47288-1125

Production line consisting of 1x 2009 STARRAG HECKERT HEC500 HV (serial number 10367, operating hours 42650 h, spindle hours 19514 h) incl. 1x KNOLL 520 S-1/200 chip conveyor and 1x KNOLL PF 210/1350 belt filter, 1x 2009 STARRAG HECKERT HEC500 H (serial number 10355, operating hours 65385 h, spindle hours 13416 h) incl. 1x KNOLL 520 S-1/200 chip conveyor and 1x KNOLL PF 210/1350 belt filter as well as 1x FASTEMS FPC 1500 pallet linear storage with 20x pallets and 5x clamping towers, Machine weight excl. pallet storage Auction-ID: A1-47475-1

NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm

Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps) 

Height 760 mm, mounted on steel beam, travel 7150 mm, incl. REXROTH MS2N07-B1BNN-CMSH1-NNNNE-NN 3-phase motor Auction-ID: A7-47529-24

Height 690 mm, travel 7150 mm, mounted on steel beam Auction-ID: A7-47529-26

New LINEA HD 5500 Gasoline Generator Type: Portable gasoline generator Manufacturer: Linea HD Model: HD 5500 Fuel type: Gasoline / petrol Rated voltage: 380 V / 220 V Frequency: 50–60 Hz Rated output: 6.0 kW Maximum output: 9.0 kW AC outputs: 220 V sockets and 380 V socket DC output: 12 V / 8.3 A Control panel: Voltmeter, circuit breaker and engine switch Frame type: Portable open-frame generator Condition: Unused / stock item, visual condition as shown This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-22

Well-functioning Tecnodom double-door refrigerator. Viewing by appointment. Auction-ID: A1-40265-115

Machine Type: Linear Motor Controller / Servo Drive Manufacturer: LinMot Series: PnP Type: C1150-PN-XC-0S-000 Part No.: 0150-2384 Serial No.: 2384.64Z.072 Hardware Version: Ver. 1 Rev. B - P27 Signal Supply: 24 VDC Power Supply: 24–85 VDC Communication: PROFINET (PN) MAC IDs: 00:1A:4E:00:C0:1C / 1D Interfaces: Motor sensor connection, motor power connection, Ethernet ports, control I/O terminals Condition: Used, stored in original box Included Accessories: Original LinMot packaging Remarks: Industrial linear motor controller for LinMot drive systems. Suitable for automation and motion control applications. CE and RoHS compliant. Auction-ID: A7-45993-209

- Sanding width approx. 1100 mm. - Workpiece thickness from approx. 4 mm to approx. 160 mm. - Variable feed speed. - It consists of:. - VIET VALERIA 3CCC INF. 1100 bottom grading sander: serial number 48051373, groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller. - VIET S3 331 TM Top Calibrating Sander: serial number SA/003920, 4 groups: grooved steel gauging roller, grooved rubber gauging roller, grooved rubber sanding roller, cleaning brush. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-97

Chicken grill with base directly from restaurant. Stainless steel. Not checked for operation. Viewing by appointment. Auction-ID: A1-40265-113