pal used for sale

This filter system may only be used to filter preclarified products that have normal filterable properties in their composition., Max. filtration flow: 400 hl/h continuous, Permissible operating pressure: 6 bar, Permissible operating temperature: 105 °C, Volume: 1456 l, Current: 10 A, Voltage: 220 V, Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h, Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar, Weight: 3450 kg, Base construction: basic frame with control and measuring components and filter container; cleaning module, Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

Used Casepacking Monoblock ITAL PAL 1650 bph The Used Casepacking Monoblock ITAL PAL 1650 bph is a packaging system that consists of three independent units that operate in sequence to ensure an efficient and continuous process. Consequently, it enhances production flow while minimizing bottlenecks. The machines that make up the Used Casepacking Monoblock ITAL PAL 1650 bph were manufactured by ITAL PAL in 2013. Notably, the system’s design focuses on efficiency, durability, and flexibility. The monoblock consists of a FCN70 case erector (Case Erector), a PK300 T1 case packer (Case Packer), and a CSN70 case sealer (Case Sealer), which allow for high flexibility in packaging management. Additionally, these three units operate in sequence to ensure an efficient and continuous process. As a result, the monoblock seamlessly integrates into various production lines. Structure and Components  ...

Used Case Sealer ITAL PAL CSN70 1650 boxes/hour The Used Case Sealer ITAL PAL CSN70 1650 boxes/hour is a machine specifically designed for the automated sealing of American boxes using adhesive tape. Manufactured in 2013, this model operates at a speed of 1650 boxes per hour, thereby ensuring high efficiency in industrial packaging processes. Technical Features of the ITAL PAL CSN70 Case Sealer First and foremost, the ITAL PAL CSN70 model includes safety protections that fully comply with industrial safety regulations. Additionally, it comes with technical manuals for seamless configuration and maintenance. Furthermore, the machine is currently in production, which demonstrates its full operational capacity and long-term reliability. Structurally, the case sealer measures 4600 mm in length and 2600 mm in depth, thus allowing for easy integration into existing production lines. Moreover,  ...

Used Shrink Wrapper ITAL PAL FCN70 + PK300T1 1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1 1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pi ...

The Doka Alu-Framax pallet is the smart storage and transport solution for your Alu-Framax formwork elements . ✔ robust & galvanised †built for maximum durability ✔ stackable & space-saving †perfect for warehouse & jobsite ✔ delivered folded †easy handling & compact storage ✔ available in 3-star and 1-star quality 👉 Minimum order: 3 pcs = 1 packaging unit 🚛 On request, we deliver your pallets directly †or you simply pick them up yourself and get started right away.   Get your pallets now †before stock runs out! 🚀 Perfect for everyone who values quality, efficiency and order on site. Price: from € 215,00 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to us ...

This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information.

Manufacturer: Uhlmann, with additional components from HAPA, Wolke, GUK, and TransNovaRuf Year of Manufacture: components range from 2010 to 2022 Type of Machine: Blister packaging line with end of line palletizing COMPONENTS OFFERED FOR SALE Component 1 - Manufacturer: Uhlmann - Model: B1330 - Function: Head machine - Year of Manufacture: 2012 - Status: Active Component 2 - Manufacturer: HAPA - Model: 230-T-1C-LR - Function: Inline printing unit for aluminum foil - Year of Manufacture: Not specified in source documents - Status: Active Component 3 - Manufacturer: Uhlmann - Model: C2155 - Function: Secondary packaging - Year of Manufacture: 2010 - Status: Active Component 4 - Manufacturer: Wolke - Model: m600 - Function: Folding carton marking unit - Status: Active Component 5 - Manufacturer: GUK - Model: Cartonac 91 - Function: Folding machine - Year of Manufacture: 2012 -  ...

Description Device Type: Automatic Filter Integrity Tester Item number: CS 001 Serial Number: 17076418 Supply voltage 12–24 V DC Country of manufacture: Germany Product Description The Palltronic® Compact Star is a fully automatic, portable integrity test device for membrane filters. The device enables fast, reliable and non-destructive verification of filter integrity by means of pressure maintenance methods. By automatically performing and evaluating the tests, it supports quality assurance in the food, beverage and process industries.

weight max. in kg: 650 kg fork length: 1150 mm stroke height: ß mm weight of the machine ca.: 250 KG dimensions of the machine ca.: 311,3 m No. 5130 Electric pallet truck / Automated guided vehicle FTF S-Electronics / LogisticJet Paleti / FTF Own weight approx. 250 kg Working area: Dimensions 2916 x 800 x 1220 Load capacity 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet truck for the safe and easy transport of pallets in workshops, warehouses, or factories - Powder-coated in anthracite gray - Made in Germany. - Four corner stops prevent the load from slipping during transport. - The pallet truck chassis is easy to maneuver thanks to its two swivel casters. Transport can be carried out with low rolling resistance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A fully automatic Krones layer depalletizer is available. Pallet format X/Y: 1200mm/1100mm, max. pallet height: 2110mm, pallet travel: longitudinal, max. depalletizing capacity: 8000containers/h, container volume formats: 200ml/375ml/750ml/1000ml, container diameter range: 55.5mm-89.5mm, container height range: 205.5mm-310mm, container conveying height: 3290mm, pallet conveying height: 550mm. Machine dimensions X/Y/Z: approx. 6300mm/2200mm/3350mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible.

Used Used Packer Monoblock & Palletizer Prosystem: Year: 2016 Condition: As Is Used Packer Monoblock & Palletizer Prosystem: Model: Compal 4F 003 NS Year: 2016 Speed: 280 CPH Suitable for: ? 2?2 with bottles of 4 L ? 3?2 with bottles of 2 L ? 3?4 with bottles of 1 L Case erector Case packer Single head 12 registrable clamps Closing carton machine By tape Closing above and bottom Palletizer Dimensions: ? Lenght 6700 mm (including entry conveyor) ? Weidth minimum 2250 mm; maximum 3000 mm ? Height 3400 mm (arm ?s palletizer) Manuals available Safety Protections Code: JM 104 More details: https://bottlingscout.com

General SKU440X1396 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Motor30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, ± 1480 rpm: and 30kW, 380 V, 1465 rpm Speed11 kW: ± 1480 rpm. and 30 kW: ± 2051 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0768759 Year of construction1968 Floor space1,2 x 1,4 m Total height1,4 m Weight900 kg Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unitPowdered foodsGeneric medicinesStarchAgrochemicalsPlasti ...

General SKU440X1456 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Capacity30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, 1480 rpm and 30 kW, 380 V, 1480 rpm Speed11 kW: ± 1090 rpm and 30 kW: 1480 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0772828 Year of construction1972 Floor space1,2 x 1,4 m Total height1,4 m Weight750 Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unit&:nbsp:Powdered foodsGeneric medicinesStarchAgrochemicalsPlasti ...

0: 1200 mm 0: 800 mm Used, well-preserved pallet frames with galvanized corner hinges available for the formats 1200 x 800 mm and 800 x 600 mm. Price for each item EUR 15,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centerless grinding machine, PARAGON RC16, 250 mm wide grinding wheel, plunge + through-feed grinding, under power in our warehouse (see video)

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m

Semi-automatic PALS labeling machine with label dispensing by manual trigger (foot pedal), Main application head: FL 10 E model / Serial number: 10E 031, Upper control unit: FL 10 E VA / Serial number: 10VA 036, Support structure / chassis : Model FL 10 150 VAP / Serial number : 10E 031, Label size (mm): Maximum width: 150 / Maximum length: 300

Semi-automatic PALS labeling machine with label dispensing by manual trigger (foot pedal), Main application head: FL10E / Serial number: 441289/2, Upper control block: FL 10 E VA / Serial number: 441289 / 3, Support structure / chassis : FL 10150 VHP / Serial number : 441289/1, Label size (mm): Max width: 150 / Max length: 300

Semi-automatic PALS labeling machine with label dispensing by manual trigger (foot pedal), Main application head: FL10E / Serial number: 10E042, Top control block: FL 10EVA / Serial number: 10VA039, Support structure / chassis : FL10150VAP / Serial number : 10E026, Label size (mm): Max width: 150 / Max length: 300

General SKU316Y654 LocationBarneveld CEcheck MakePalamatic Main Features MaterialStainless steel Motor4.4 KW Specified Features - Bag dump station Capacity5 bags/min With motor4,4 kW, 400 v. Bag dump stations MaterialMild steel, Stainless steel 1.4301 (304) General TypeMinislit 3000 No.TOT-1507 Year of construction2016 Mounted on framecheck Mounted on legscheck Weight2100 kg Extra information Extra SpecificationsAutomatic bag dump station for all bag types (except jute), bags are cut along the front edge and down both sides, With vacuum bag manipulator on slewing jib crane, inclined bag infeed belt conveyor with pneumatic pre-crusher, cutting unit, Screw compactor for empty bag evacuation into PE sleeve, Integrated dust collector with filter cartridge DN325, height 1000 mm, fan and filter cleaning system, Telescopic filling tube with inflatable seal and DN300 butter ...

A complete Pall cartridge filter unit with cleaning equipment is offered. Filter housing: Pall SFG7194GNW80, filter cartridge positions: 19, max. operating pressure: 10bar, max. operating temperature: 140°C, volume: 153l. 2) CIP tank: approx. 5hl, steam-heated. Including Hilge CIP pump, Pall water filter with 3 filter cartridges, complete piping, Kieselmann butterfly valves, digital Barby+Kühner thermometer, inlet and outlet pressure gauges as well as 10 stainless steel blind plugs for the cartridge mounts. Suitable for depth filter cartridges and membrane filter cartridges. An on-site inspection is possible.

consisting of 4 stations: Model 1528.0419, year 2002, Model 0370.0401, YOC 2002, Model 0370.0401, YOC 2002, Model 0423.0420, YOC 2005

General SKU266Y407 MakePall TypeDU006-EU No.CCT-MM210176 Year of construction2021 Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersMixers > StirrersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > ...

General SKU266Y408 LocationBarneveld CEcheck MakePall Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersMixers > StirrersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustri ...

General SKU266Y409 LocationBarneveld MakePall Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersMixers > StirrersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Recy ...

General SKU266Y410 LocationBarneveld MakePall Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersMixers > StirrersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Recy ...

General SKU266Y412 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.18 KW Specified Features - Stirrer Motor± 0,186 kW Stirrers MaterialStainless steel 1.4306 (304L) General MakePall TypeMMG403 Year of construction2021 Weight50 kg Extra SpecificationsSpeed 20–300 rpm. Motor 1/4 HP (approx. 0.186 kW). Power supply 100–230 V AC, 50/60 Hz. Input power &:lt:250 W. Control box IP65, drive unit enclosure IP23.MAGNETIC MIXER, STAINLESS STEEL, DIGITAL CONTROL, NO TANKPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersStirrersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pig ...

General SKU257Y266 MakeSartorius Stedim Systems LocationBarneveld CEcheck Main Features MaterialStainless steel Volume1000 Ltr. Motor0.25 KW Specified Features - Miscellaneous mixer Capacity1000 l Miscellaneous mixers Mixercheck Capacity1000 l MaterialStainless steel 1.4301 (304) General Type1000 l No.HU13538/23 Year of construction2023 Floor space1.55x 1.45 m Total height1.75 m Weight1000 kg Extra Specificationswith Pall MMG403 magnetic stirrerMotor ± 0,186 kW, Material Stainless steel 1.4306 (304L), Year of construction 2021,&:nbsp: Speed 20–300 rpm. Motor 1/4 HP (approx. 0.186 kW). Power supply 100–230 V AC, 50/60 Hz400ltPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersMiscellaneous mixersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf. ...

Busch SE 90 Paper Pallet Turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Busch SE 90 Paper Pallet Turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Busch SE 90 Paper Pallet Turner Price: 5000 EUR Download PDF Busch SE 90 Paper Pallet Turner The unit is in full working order and ready for operation. This pallet turner is manufactured by the German company Busch. It is a current production model. Technical specifications: Format: 900 x 620 mm Stack height: max. 1220 mm, min. 420 mm Load capacity: 500 kg Machine weight: 750 kg Power supply: 380 V Oper ...

Year of construction 2000 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Computer control with digital display Bundling with paper or plastic tape Mobile substructure Delivery date: immediately

12 pieces ring dies Paladin 2400 CAV for pelletizing mill Andritz type Paladin 2400-250/ 2R BM Perforation 16/22 mm Pockets milled out for special rolls Material X46Cr13 unused = new Price per unit net ex location 6,250,-- € + VAT Sale from BL Brandenburg Code Q17

Technical specifications: - Manufacturer: Venjakob - Model: VEN DRY - Year of manufacture: 2007 - Working height: 920 mm - Number of belt pallets: 6 - Belt pallets with conveyor belts - Pallet length: 6,450 mm - Usable length: approx. 6,200 mm - Inlet width: 1,400 mm - Dryer operates in continuous flow mode - Clearance between tiers: 75 mm - Heat requirement: approx. 137 kW - Hot water temperature: max. 70/60 degrees - Conveyor belt feed speed: 2–10 m/min - Temperature: max. 40 degrees - Air flow rate: 16,309 m³/h - Exhaust air flow rate: 2,400 m³/h - External dimensions: Length: 8,275 mm Width: 2,290 mm Height: 2,560 mm Height: 3,380 mm including supply air unit - Volts/Hz: 400 V/50 Hz - Available: 08/2026

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet jacks -Load capacity: 2000 kg -Dimension when retracted: 195 mm -Extended length: 320 mm -Fork length: 1010 mm -Fork width (outer): 665 mm -Inner fork width: 345 mm -Weight: 105 kg

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR400 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: light blue (rusted) Truss type: TRN1-270-10-l INP profile: 100 x 50 mm Agraffe: 5 HK (hooks) Clear width: 2,690 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

New Palletizer ROBOT-ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation – Speed suitable for 72.000 cans/hour line for 250 ml slim cans with 6×4 configuration, on 1200×1000 mm pallets – Package infeed height, H=2000 mm – Designed for pallet dimensions 1000x1200mm – Max. standard pallet height 1900mm – Pallet transfer height, H=500mm Machine is composed of: Fast Pack Formation Table at High Elevation – Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer. It is controlled by the PLC and. The device is equipped with a turner, which turns the product of 90°, if required. Intermediate Table – Consists of conveyor table, a product pushing device to pallet lifter. Driven by a geared motor. The translation of the layer fr ...

Technical data for the pallet racking system: Shelving system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 37,320 mm Number of fields per row of shelves: 11 pieces of 2,700 mm each Number of levels plus ground level: 02 pcs. The scope of delivery includes: 12x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,200 mm high 1,100 mm deep Csbtwcqtoz I Syge Horh 44x Pallet rack crossbar, used Material colour: orange Truss Type: HN100|20 Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,300 mm 88x Locking Pin, Used Material colour: sendzimir galvanised For securing the longitudinal memb ...

Technical data for the pallet racking system: Shelving system: META Thyssen Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 30,720 mm Number of fields per row of shelves: 11 pieces of 2,700 mm each Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 99 pcs. Total number of pallet spaces: 99 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 12x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed  ...

Technical data for the pallet racking system: Shelving system: META Thyssen Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,010 mm Number of fields per row of shelves: 05 pieces of 2,700 mm each Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 45 pcs. Total number of pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 700 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed t ...

Technical data for the pallet racking system: Shelving system: META Thyssen Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,010 mm Number of fields per row of shelves: 05 pieces of 2,700 mm each Number of levels plus ground level: 04 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 45 pcs. Total number of pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 700 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed t ...

Technical data for the pallet racking system: Shelving system: Jungheinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 13,980 mm Number of fields / row of shelves: 05 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 55 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( welded truss ) Height: 4,600 mm Depth: 1,050 mm 20x Pallet rack crossbar, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN 120x30 Agraffe: 3 HK (hook) Clear width: 2,700 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 24x bolt anchors, new M ...

Technical data for the pallet racking system: Shelving system: Jungheinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 2,860 mm Number of fields / row of shelves: 01 pcs. á 2,700 mm Number of levels plus ground level: 03 pcs. The scope of delivery includes: 02x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 55 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( welded truss ) Height: 3,800 mm Depth: 1,050 mm 06x Pallet rack crossbar, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN 120x30 Agraffe: 3 HK (hook) Clear width: 2,700 mm 12x Locking Pin, Used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 08x Bolt Anchors, new  ...

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 400 The scope of delivery includes: 01x Pallet rack stand, used Material color: green Profile dimensions: U 120 x 60 x 4 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled (welded truss) Height: 4,020 mm Depth: 950 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Hand pallet truck capacity 2000 kg, never used Overall dimensions: 2000 x 800 x 1300 mm Weight: 120 kg Auction-ID: A7-50796-332

Hand pallet truck capacity 2000 kg, never used Overall dimensions: 2000 x 800 x 1300 mm Weight: 120 kg Auction-ID: A7-50796-324

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk - Former Linde full-service device - Attention: without battery, function unknown Auction-ID: A1-51195-322

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jk-VARWfqqk - Former Linde full-service device - Service valid until 07/2027 - UVV valid until 07/2027 - Battery: 49/2015 24V 375Ah, voltage measured at rest with 25.2V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-51195-347

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51195-2430