painting cabine used for sale

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Qty. 1 Second-hand carousel baitec painting line Mfc.: Nordson Type: Sure Coat Built: 2002 Capacity: 150profiles/h Max. profile length: 7.0 m Qty. 10 electrostatic guns Capacity: 5 profiles inside oven

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

LUTRO painting booth diagonal ventilation on the side: Make : LUTRO Built: 1996 Dimensions: 4.0 m x 6.5 m x 3.5 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 3 pcs recessed luminaires with 4 x 58 W each Entrance gate: 2.4 x 3.5 m (approx. WxH) Escape door: 0.6 m x 3.5 m (approx. WxH) Heating unit: 200 kW with Abig gas burner Dry temperature: 80 degrees C Supply air unit: 12,300 m3/h; 5.5 kW Exhaust unit: 12,000 m3/h; 5.5 kW Suction register: 2 pieces on the side, 2.6 x 1.1 m (approx. WxH) Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location: Friedrichshafen area Sell price: € 9,990,-, net from location without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, ...

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Make : LUTRO Type : Special plant BU EI S Built: 1990 Dimensions: 4.8 m x 7.0 m x 3.9 m (approx. WxLxH), total height 5.5 m Supply air ceiling : Filter ceiling Lamps: 2x4 pcs. Recessed luminaires, 4x58 W + 2x3 wall recessed luminaires on the side Entrance side : Roller door 4.0 m x 3.9 m (approx. WxH) Exit side : Roller door 4.0 m x 3.9 m (approx. BxH) Escape door: 2 pieces, 0.6 m x 2.1 m (approx. WxH) Grating : Full-surface grating, 80 pcs. 690x560 mm, support rod 560x50x3 mm Heating unit: 291 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust air unit: 22,000 m3/h Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Stuttgart area Sell price: € 14,500,- net from location, without disassembly

Painting booth Aschaffenburg: Make : Lutro Built: 2007 Dimensions: 4.0 m x 5.0 m x 2.5 m (approx. WxLxH) Supply air ceiling : Filter ceiling approx. 3.2 x 1.8 meters Lamps: 2 x 2 pcs. recessed luminaires with 4 x 58 W each Entrance side: 4-wing folding gate 3.7 m x 2.4 m (approx. WxH) Escape door: 0.8 m x 2.0 m (approx. WxH) Rusting : no gratings, because of diagonal ventilation, no pit required! Heating unit : Gas surface burner, 128 kW Dry temperature: 80 degrees C Supply air unit: 10,000 m3/h; 3.0 kW Exhaust air unit: 10,000 m3/h; 3.0 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Area Aschaffenburg Sell price: € 9,990,-, net from site incl. disassembly

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Paint booth: Make : Wolf Year of manuf.: Cabin 2011, Aggregate 1993 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pcs recessed luminaires with 3 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x50x3 mm Heating unit : 267 kW Oil burners : ELCO brand, alternatively gas burners Dry temperature: 80 degrees C Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 22,800 m3/h; 7.5 kW, 960 1/min Exhaust air unit : 22,500 m3/h; 7.5 kW, 960 1/min Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet The paint booth was originally a Wolf drying booth, but wi ...

Length: 5200 mm Width: 1200 mm Height: 900 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

DIRECTLY FROM THE PRINT SHOP Komfi FULLMATIC 52 Painting machine - Paper size: max. 520x740mm; min. 200x250mm - Paper sheet basis weight: 115-350g/m2 - Paint specification: Grade: UV with viscosity of 30-64s (DIN 4mm flow cup viscosimeter) - application quantity: 4-15g/m2 - Painting speed: 5-30m/min Mooring head speed: 200-299mm max. 20m/min; 300-750mm max. 30m/min - Stacking height feeder: max. 480mm - Paint temperature: min. 20ºC - IR temperature: max. 80ºC - Floor area: 4.55m2 - Floor space: 1.4x3.3m - Dimensions: 3,300x1,400x1,300mm - Weight: 730kg If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Electrostatic painting line Wagner with conveyor Technical specifications: Pumps for providing of material Leopard 35-150,pcs -2 Washing pump Leopard 35-70 Painting manipulators + guns, pcs - 2+4 Capacity, Kwt - 5,5 Max. material pressure at the pump inlet, MPa-Bar-Pound / m² - 2-20-290 The pH value for the material, pH - 3.5 ÷ 9 Material temperature range, ˚С - +5 ÷ +80 "Ambient temperature range, ˚С - +5 ÷ +60 " Permissible angle of inclination at work, ˚arcs - ± 10

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

I sell the spraying automat Renojava yr. 2013 Working width 80mm Element thickness up to 80mm Feeding bands length: 1,60 + 2,60m Technology break 200mm / Element length min. from 300mm. Total length: 4,40m Ring arm system for guns from each side Pump included. Feeding system with motors. Good condition. Available immediately.

ABB Robotics ME502 , explosion-proof , control C5.3A painting robot Hollow Wrist Control: C5.3A Number of axes / robots: 6 Working radius : approx. 2572 mm Year of construction: 1995 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading Auction price is net. You will receive a proper invoice with VAT. If you have any further questions, please contact us by e-mail or call 0151-21271265

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Rolls 0.5m x 20m 1.5m x 20m 2.0m x 20m 2.5m x 20m 3.0m x 20m 9,50€ / SQM

Texture application machine SORBINI T20-3 STP Сharacteristic Length, mm - 6300 Width, mm - 2500 Working width, mm - 1200 Height, mm - 1700 Number of nodes, pcs - 3 Number of shafts, pcs - 6 Total power of engines, kW - 13,50

UV painting line for parquet and wooden parts incl. sanding station, including control cabinets. Length: approx. 38 meters Year of construction: 1990 and 2005 To be delivered in whole or in part Price on request

Automatic painting machine – Cattinair Rotoclean spraying machine Type: Roto-G Year of construction: 1998 Working width 1300 mm Left side Steel belt transport system Circular rotor with 8 spray guns 2 color wheels for solvent-based paints and water-based paints Paint cleaning or paint recovery incl. 1 paint pump in working order

Painting module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC -Price: per piece -Number: 2x available -Weight: 0.8 kg

TECNOAZZURRA water-based spray booth model ECO PLUS G4A: - with double water film and water recirculation - with galvanised grating platform - Useful working dimensions 4 x 1 m - Electric fan power kw 4 / hp 5,5 - intake air flow rate 15,000 mc/h - electric water pump power kw 1,5 / hp 2 - Overall dimensions 4.4 x 2 x H=2.4 m (H=3.2 with fan) - complete with electrical panel and upper lights It comes disassembled. Year 2008 , CE regulations

Motoman Yaskawa PX1450-F20 , explosion-proof , control XRC painting robot Control: XRC Number of axes / robots: 6 Working radius : approx. 1435mm Year of construction:2007 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading Auction price is net. You will receive a proper invoice with VAT. If you have any further questions, please contact us by e-mail or call 0151-21271265

Description: Lot consisting of about 39 paintings. . Reproductions by various artists, mainly UGO NESPOLO. Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,000 mm, weight approx.: 40 kg

Painting line, alternatively as a complete package from items 2190-2193! Without item 2940!

Description: Consisting of: , Stemas bar loader , Sander Stemas composed of: , 4 brushes , 1 abrasive belt , Transfert belt , Spraying machine brand Mauri , Ventilated drying oven brand Mauri , Spraying machine brand Mauri , Oven with horizontal belt for drying complete with ventilation and UV lamps , Maximum workpiece width 240 mm , Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Painting robot, manufacturer: VENJAKOB, type: HGS-Duo-C-S3, year of manufacture: 1997, serial no.: A9707001, 2 duo spray heads, 2 duo replacement spray heads, paint supply system with 2 paint pumps, paint discharge ring, drying tunnel RIPPERT, L approx. 44 m, tunnel width approx. 1,000 mm, 2 UV radiant heaters IST U-1500-2+2-N-DL-SO, UV tube type T1500U, UV range approx. 180 - 450 nm

Description: Electric pump for painting, 230 volt power supply, maximum pressure 200 bar, productivity 8m/min Approx. Onsite Dimension. (l x w x h): 500 x 500 x 700 mm, weight approx.: 10 kg

Description: Electric pump for painting, 230 volt power supply, maximum pressure 200 bar, productivity 8m/min Approx. Onsite Dimension. (l x w x h): 500 x 500 x 700 mm, weight approx.: 10 kg

SPECIFICATIONS: Working width: 5,000 mm Lamellar profile structure with collection container Double condensation veil Complete with: - Temperature display - 2 RL502 extractors with 2.2 KW

Approx. Onsite Dimension. (l x w x h): 3,400 x 3,400 x 3,400 mm, weight approx.: 2,000 kg

Approx. Onsite Dimension. (l x w x h): 3,400 x 3,400 x 3,400 mm, weight approx.: 2,000 kg

Description: Powder painting line Input dimensions: 2100mm high x 1970 mm wide Side walls can be closed to work with a width of: 1500 mm , Vertical travel of the booth: 2130 mm max height. Automatic spray gun working area: 2850 mm max. , Extractors and conveyor belt Burners and gas valve need to be checked. Washing and degreasing area Automatic painting with 4 spray guns (2 on each side) Manual painting area, 2 stations Drying area 2007 Estimated year of manufacture This machine hasn´t worked more than two years. Estimated working hours 1000 Approx. Onsite Dimension. (l x w x h): 40,000 x 8,000 x 3,000 mm, weight approx.: 44,000 kg

Description: A DURST system from 2022 is for sale, which is in as new working condition. It consists of a Painting and Drying System and a Cabin for Cleaning and Drying. Line number: 521052 Product description Painting and Drying system Plant type: D-LTA Total internal length: 8,000 mm Clear width inside: 8,000 mm Clearance height inside: 6,100 (UK running rail) Motor power: 2 x 15 kW Volume flow full load: 30,000 m³/h Max. dimensions of the workpiece: 5,500x5,500x6,000 mm Product description Cleaning and Drying cabin System type: D-RTA Total internal length: 8,000 mm Clear width inside: 8,000 mm Clearance height inside: 6,100 (UK running rail) Motor power: 11 kW Volume flow full load: 30,000 m³/h Max. dimensions of the workpiece: 5,500 x 5,500 x 6,000 mm General specifications Paint mixing room (LMR) Extraction system cabin length: 6,000 mm, workpiece di ...

Hazardous material Cabinet, Safety Cabinet Manufacturer: Düperthal Type: 2.22.925-3 DIN 12925, part 1 Dimensions: width x depth x height (approx. 120 x 60 x 193 cm) 2 door with 3 adjustable shelves without a key automatic closing small Fender Bender All information without guarantee

Stainless steel switch cabinet, baying cabinet, 600x2300x600mm TS8452.600, Rittal, used Top Special price The current price of a similar product is € 3.280 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.1, bayed enclosure, TS8452.600, Rittal, used-Top: - Baying cabinet width 600mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. left side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - Incl. Rittal enclosure fan SK 3240.100 and limit switch - In ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel switch cabinet no.2 or no 4 or no 5, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the tr ...