paint plant used for sale

Complete Venjakob industrial spray coating and drying line for MDF panels, doors and furniture components. Manufactured in 2023, installed and fully operational. Designed for high quality finishing with consistent results and industrial productivity. Technical Specifications Workpiece size Max thickness Capacity Up to 1300 x 3000 mm 80 mm Approx. 120–180 m²/hour Application Main Components • VEN TRANS BELT infeed conveyor • VEN CLEAN ONE cleaning unit • VEN SPRAY SMART with dual spray guns • VEN DRY COLLECT LL drying tunnel • VEN TRANS ROLL outfeed conveyor • Sames Kremlin Airmix pump MDF panels, doors, furniture components • Integrated paint recovery and exhaust system Used for less than 1 year, excellent shape.

Sehon Painting and drying system SE-Professional Futura built in 2007 Professional combined painting and drying line with partition wall from Sehon with large cabin capacity and PLC control. Manufacturer: Sehon Innovative Lackieranlagen und Technik Model: SE-Professional Futura Year of Make: 2007 System type: Combined painting and drying system Cabin interior dimensions: 14,000 x 5,000 x 4,400 mm Cabin height outside: approx. 4,900 mm Entrance/exit gates: 2 pieces front and rear Door opening: 4,000 mm high x 4,500 mm wide Gate design: insulated steel sandwich construction Door leaf thickness: 54 mm Housing: mineral wool insulated steel cassettes Cassette thickness: 50 mm Colour housing: RAL 9010 pure white Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating Modes: Painting, Drying, Manual Operation ...

1st package of painted props = 3.340,50€ package price 350 x Props painted 1.60 - 3.00m, used = 8.50€/piece 43 x Props painted 2.00 x 3.50m, used = 8.50€/piece Including 8 x stacking rack, used 1st package of galvanized props = 2.040,00€ package price 133 x Galvanized prop, used 1.60- 3.00m = 15.00€/piece 2 x Galvanized prop, used 2.20 - 4.00m = 15.00€/piece 1 x galvanized prop, used 2,50 - 4,50m = 15,00€/piece Including 3 x stacking rack, used Only available in a package! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration C ...

Length: 5200 mm Width: 1200 mm Height: 900 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction diameter: 300mm. Please note! Without exhauster, extraction. Auction-ID: A1-41278-76

Power: Total pw. 30 kW; ventilation 4 x 7.5 kW turbines; heating oil burners 2 x ~190 kW (max. exchanger 210 kW) Operating parameters: Air flow 24,000 m³/h (500 Pa); fuel: heating oil; industrial ventilation + heating system Workpiece capacity: Cabin internal dim. L 15,000 x W 5,000 x H 3,750 mm; large components/vehicles processing Supported edges: Metal, automotive parts, industrial components (typ. painting/drying) Edge types: Spray painting; drying; ventilation treatment Included equipment: Cabin structure with 50 mm sandwich panels (steel reinforced); main door 4,000 x 3,500 mm; 4x blower turbines; 2x Riello RG5S oil burners; heat exchanger; full ceiling filtration (non-flammable synthetic microfiber); air distribution system Compliance: Industrial paint booth; filtration system installed; CE N/C Power supply: 3 x 400 V + PE + N; fuel oil heating Year/Manufacturer: ...

Power: N/C; heating registers for supply air ceiling + 2 drying zones Operating parameters: O-structure; approx. 12 material frame supports; frame length 3,500 mm; frame width 600 mm; 2 opposite painting surfaces; 1 longitudinal roller conveyor; cross conveyors in drying zones; capacity approx. 2 frame elements per drying zone Workpiece capacity: Frame elements/components up to 3,500 mm length; continuous infeed/outfeed system Supported edges: Wood, metal or industrial components (typ. spray application) Edge types: Spray painting; airless + fine spray application; drying Included equipment: Type designations TR3750; GT180/3500/4100/CT; TR377; Serial No. 04019/250; 6x WALTER pump stations; 6x WAGNER fine spray guns; 3x WAGNER airless pumps w/ hand guns; 8x explosion-proof lamps (supply air ceiling); 2 painting stands w/ floor extension; integrated heating registers; conveyor s ...

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

Rolls 0.5m x 20m 1.5m x 20m 2.0m x 20m 2.5m x 20m 3.0m x 20m 9,50€ / SQM

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Paint mist extraction mobile with 3 meters flexible slauch

Impeller D.477 with ceramic paint YYKM250RNA/75/CS-5 1-Y400741 for CAPRARI PUMP KCM250TA+180042N1/SF – 496930/2 8211805 - 2 pcs

Paint dosing system from Fluid Solution incl. software

Paint mixer Busch FM 5; good condition; cleaned and tested; Capacity max. 5kg; adjustable up and down movement. Ink Mixer Busch FM 5; good condition; cleaned and checked; max.capacity 5kg; up and down movement of thje ink.

Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.

Paint mixer Busch FM 20; Capacity 20kg; mobile. Ink mixer Busch FM 20; capacity 20kg; mobile.

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

Paint dosing pump, chemical pump FEINPRÜF F16 20 92500036 shaft diameter: Ø 20 mm Flange diameter: Ø 57 mm New ! Dimensions: 122 x 80 x 142 mm

Paint mixer Busch FM 12; good condition; cleaned and tested; Capacity 2-12kg; including scale and tilting frame; optionally with 2nd pot and 2nd stirring rod. Ink mixer Busch FM 12; good condition; cleaned and checked; capacity 2-12kg; included scale and tilting frame; for option with secound ink container and secound mixing arm.

Spare roller: TLX/ELX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 200, EPDM: yes,

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Spare roller: DAK, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca.60, Approx. thickness of rubber coating in mm: 20, Creasing on a 1 cm: ca.,

Manufacturer: Giardina 1450 mm 40 shore 10 Gummierung , Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10,

Manufacturer: Giradina Lackersatzwalze 1300 shore 35, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1300, Approx. thickness of rubber coating in mm: ca 25,

Manufacturer: Bürkle Lackauftragswalze 1516 mm Moosgummi Poore 2 NEU , Spare roller: DAL SLC, Roller rubber coating: Poore 2, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,

Manufacturer: Bürkle Lackauftragswalze shore 60 Länge 1336 mm NEU, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.20,

Manufacturer: Bürkle Lackauftragswalze 1415 mm shore 60 25 mm Gummi , Bürkle: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Bürkle Lackersatzwalze 1416 mm shore 50 Gummi muss geschliffen werden, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.25,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore muss geschliffen werden, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 30, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 186,

Manufacturer: Bürkle Lackersatzwalze 1416 mm 40 shore neu geschliffen, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Lackgiessanlage, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: links, Working height: 920, Pump system: Rührwerk, FREE TEXT: bald verfügbar,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Manufacturer: Bürkle SLC Dosierwalze Neu 174 Durcmesser mm 1416 mm, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416, : SLC, : 174, : Chrom,