pack to pack used for sale

Unused

Foot control / strip bender / opening 159x77cm

In pvc case

Mains connection: 400 VAC; 50 Hz Power consumption: 6kW; 11.5 A Max. fuse: 16 A Detergents: Aqueous cleaners Capacity: 120l Compressed air connection min 5bar

Including various accessories, unused

Content consisting of 55 pieces SK 50 tool holders, some equipped with cutting tools such as internally cooled solid drills, cutter heads, indexable insert milling cutters and boring tool Reference: Seitz und Strenger - Lot 52 Weight: approx. 500kg

Self-centering chuck 3 jaws Rohm 400 mm Independent chuck 4 jaws Rohm 600 mm Running glasses 30-200 mm Fixed Seat with Rollers 40-215mm Fixed Glasses with Rollers 210-390 mm Sony digital readout 2 axis Multifix quick-change holder type D Fixed center Rotating center Pivot bus Manual & drawings German language Manual English

For HSKA63 recordings/ equipped with 39 positions

Tool trolley filled Content and equipment see pictures Condition: never used / new (5)

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-710-650 RA2415 Make: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 nominal voltage: 24V, 380-500V condition: Ausstellungsstück Conveyin ...

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...

Batch of clamping material for machine bench, consisting of: clamping blocks, clamping jaws, T-slot clamps, sets and bolts in various sizes. Includes: (1x) shelf trolley.

Lathe cuting tools from KEMMER in deferent size and type

Length approximately 8 meters.

Consisting of: various BT40 / ISO40 holders, including Haimer, Seco, EPB.

Tool holder Weldon VDI 80 50100 Pieces: 1 60120 pieces: 6 Manufacturer: EWS Type: VDI 80 Country of origin: Germany Price without VAT Piece:

Tool holder Weldon VDI 60 50100 pieces: 5 1090 pieces: 2 4087 pieces: 2 24100 Pieces:1 3090 pieces: 10 2570 pieces: 1 32100 Pieces:1 Manufacturer: EWS Type: VDI 60 Price without VAT Country of origin: Germany

19 pieces, various manufacturers such as EWS and WNT 3 pieces of driven holders, suitable e.g. for EMCO lathes 16 pcs rigid holders, tool interface hpts. Square transverse and drill rod, mostly with tools Transport dimensions: 800 x 600 x 400 mm, approx. 50 kg

Including various paper and soap dispensers, fluorescent lamps, air casing reel, grommets, various tubes, and so on

Tool holder Weldon VDI 50 3296 Pieces: 1 25160 pcs: 1 12170 Pieces: 1 40130 Pieces: 1 Manufacturer: EWS Type: VDI 50 Price without VAT Country of origin: Germany

FAG, Ringfeder, SKF, Tollok - Batch of industrial bearings & clamping elements

Consisting of: various ISO 20 holders, Depo, precision holders

Toprol - Batch of industrial bearings and bearing blocks 187KG Condition: unused

Rotational speed: up to 6000 rpm Reference: Beeper - Lot 122

Tool holder Weldon VDI 40 10×80 Pieces: 12 3075 pieces: 2 4190 pieces: 3 4080 Pieces:2 3273 Pieces: 2 1375 Pieces: 12 1875 Pieces: 2 1668 pieces: 4 40120 pieces: 5 3095 pieces: 3 2475 pieces: 2 28/2775 Pieces: 2 1980 pieces: 10 3280 pieces: 5 667 pieces: 10 25150 pieces: 4 1865 pieces: 4 2580 pieces: 1 896 pieces: 1 Manufacturer: EWS Price without VAT Country of origin: Germany Condition: new

Consisting of two pieces Serial number: 9117-08 and 9117-07 Speed: 4000 rpm Reference: Pieper - Lot 18

A total of 29 pieces , most of them equipped with tools incl. storage system Reference: Wittner - Lot 12 Weight: approx. 50kg

Mixed lot of ISO-standard lathe tool holders, including turning, grooving, and threading types. Shank size predominantly 25 × 25 mm

Consisting of: various HSK A80 holders, including Depo

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Universal tool milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 123 Year of Make: 1994 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer 1 pc. machine vise 1 pc. counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm , 0 16 mm , 0 27 mm Various tool holders S 22 x 2 Bellows Z axis 1 chip protection Machine Light Automatic central lubrication pump Coolant Setup Operating instructions THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Lots of cutting tools consisting of inserts, milling cutters and drills Various manufacturers Transport dimensions: 800 x 600 x 400 mm, approx. 20 kg

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Lapping machine manufactured in 1983. This MYLÄP 400 features a lapping plate diameter of 400 mm, suitable for precision lapping applications. If you are looking to get high-quality lapping capabilities, consider the MYLÄP 400 machine we have for sale. Contact us for further details.

Lapping machine manufactured in 1990. This MYLAP 700 features a power of 7.5 kW and operates at a voltage of 380 V. If you are looking to get high-quality lapping capabilities, consider the MYLAP 700 machine we have for sale. Contact us for further details.

Graver grinding machine PARPAS type AUFabr. No. 854/36 Year of construction 1971Grinding wheel diameter 100 mmGrinding spindle speed approx. 3500 rpm. Motor power approx. 0.55 kWNetz connection 380 volts, 50 Hz- Socket for collets (system DECKEL with S20x2)- Collet 15.0 mm- Diamond grinding wheel dresser for the grinding wheel endSpace: L x W x H 700 x 350 x 450 mmWeight approx. 80 kgGood condition; used

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Steel grinding block, steel grinding machine ULRICH KLINGEL type HSM 4Year of construction approx. 1976with 4 workstationsGrinding wheel diameter: 1x 100; 1x 150; 2x 200 mmGrinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kWNet connection: 380 volts, 50 Hz- 3x swinging grinding table- all 3 workstations with swivelling tables, feeding movement via handwheel- one workstation (the 4th) with swivelling and tilting table, feeding movement via handwheel- 1 piece diamond grinding wheel 100 mm is mounted (heavily worn)- 2 pieces

This 4-axis SCHÜCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÜCO Profilbearbeitungscenter. Contact us for more information about this machine.

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.