p k used for sale

Directional Control Valve , Pneumatic Valve PARKER, TELEPNEUMATIC PRSA121M 080172 New ! Dimensions (packaging): 110 x 65 x 45 mm

Directional Control Valve Base ORSTA Dn25 - TGL 20705 Pn 1 MPa ED 100 TGL 43334 220 V AC New ! Dimensions: 310 x 1110 x 65 mm

Pneumatic valve ORSTA, REGLERWERK DRESDEN Type: 1.110 142 TGL 201/87 New ! Dimensions: 100 x 115 x 100 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER PWR-A1483 80956 1 - 10 bar Control line connection: 8 mm push-in connection threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! New !' Dimensions(Single Throttle Check Valve): 65 x 65 x 30 mm Dimensions: 120 x 70 x 30 mm

Logic Elements Set, AND Valve PARKER, TELEPNEUMATIC PLL-B12 080052, 80052 Set consists of 2 valves ! New ! Dimensions(single AND valve): 66 x 26 x 30 mm Dimensions(Packing): 75 x 70 x 35 mm

Pressure Control Valve, Swivel Differential Pressure Control Valve PARKER, LEGRIS 74712121 1 - 8 bar threaded connections: G 1/2 New ! Dimensions: 100 x 80 x 35 mm

Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER, TELEPNEUMATIC PWRA1458 080950 1 - 10 bar Control line connection: 4 mm plug-in connection threaded connection: G 1/8 Throttle check valve set consists of 3 valves ! New !' Dimensions(Single Throttle Check Valve): 45 x 45 x 20 mm Dimensions: 60 x 60 x 80 mm

Pressure Control Valve Set, Differential Pressure Control Valve PARKER PWP-B1289 9944 1 - 8 bar Control line connection: 8 mm plug-in connection threaded connection: G 1/4 Pressure control valve set consists of 2 valves ! New !' Dimensions(Single Pressure Regulating Valve): 65 x 50 x 25 mm Dimensions: 130 x 60 x 65 mm

Large amount of APV Polimers plastic crates, dimensions each crate: 600 mm x 400 mm x 150 mm.

Offer 26088 Technical data: - Flat steel shears - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 15 mm - E. Contact stop - various punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

In the pipeline 6 x HSM V-Press 860 plus vertical baler, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

Painting line Dimensions: painting line with conveyor and PLC. inlet and ionization: 2300mm long x 1500mm wide x 1200mm high paint booth: 2000mm long x 4300mm wide x 3200mm high evaporation zone: 1600mm long x 1600mm wide x 1400mm high Oven: 4200mm long x 1600mm wide x 2300mm high supply air/exhaust air pipes: construction height approx. 1200mm Find more here - /

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...

The Combi-Pack CW 500 – S is a packaging machine used for combining and packaging products in various industries. Here´s a general description and specifications for the Combi-Pack CW 500 – S: Machine Description: The Combi-Pack CW 500 – S is a versatile and efficient packaging machine designed for high-speed packaging applications. It incorporates advanced automation and control systems to streamline the packaging process and increase productivity. The machine is built with robust construction and precision engineering to ensure reliable and consistent performance. Specifications: 1. Packaging Speed: The CW 500 – S offers a high packaging speed, typically capable of packaging up to X products per minute (specific speed may vary based on product size and characteristics). 2. Product Compatibility: The machine is suitable for packaging various types of products, including bu ...

They were used to package bicycle accessories Find more here - / Contact us at -

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - / Contact us at -

Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -

Power plant (Lambion-Howden-Scheuch-Hamworthy) History - Commissioning: 2009 - Power plant built for the heat supply Manufacturer: Lambion Siemens (turbine, measurement and control technology) Imtech (electrics and performance data: 950 kW rated electrical power 2.00 MW rated thermal output HT(128 128°C) 1.50 MW thermal output NT (85 85°C) 6.74 MW thermal firing capacity Steam output: 7.5 t/h approx. 11,000 tonnes of fuel required per year LPM and WHS Boiler Manufacturer Lambion Year of construction 2008 Maximum steam production [t/h] 7.5 Max. permissible pressure [bar] 32 Max. permissible vapour temperature [ [°C] 440 Turbine / Generator manufacturer Howden Machine TWIN CA 34 Year of construction: 2008 Generator manufacturer: AvK Generator Generator type: DSG 74 M2 System data: Flue gas cleaning Manufacturer Scheuch Condenser / recooling manufa ...

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

Industrial continuous press, including the discharge table. The machine will be in full use until December 20, 2024. From December 21, 2024, the system can and must be dismantled. The glue application machine and the table in front of the press remain and are not for sale. The facility is still fully operational and can be visited at any time. System data: Press brand: Friz Pass Press 1973. Pressplatte: 5300 x 2250 mm Opening: 125mm Heating: hot water / steam Pressing temperatures: Cold approx. 30° to Max temperature 130° (adjustable) Cylinders: 3 rows of 5 cylinders each Diameter of cylinder: 160mm Pressure: 160 Baar (Adjustable) Glue: White glue D4 or modified with hardener. Find more here - / Contact us at -

SFC. Isolator SFC 10 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

2017 TLM Prime 400 Welding machines flow packer Product filling from above, stable steel construction[1] powder-coated; guides and components thatcome into contact with the product made ofstainless steel; color RAL 7035 light gray and RAL1021 rapeseed yellow; stable, transparent protective cover made ofpolycarbonate Safety cover overwelding system and control panel; manual filling intopre-tensioned bags on the forming shoulder; automaticoperation via photocell control; motor drivevia stepper motors (2 pieces); adjustable (standard)or fixed shaping shoulder adapted to the product; Product is pulled and welded via a roller system (take-off roller/welding roller); adjustableheadroom height; Product infeed belt/ welding system adjustable at an angle of 45° - 80°; max. product thickness100mm; Latest Mitsubishi system for optimizing the rolling movement of the axles; control panel typeMits ...

2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed ​​of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Press in very good condition, under power. Find more here - / Contact us at -

Production machine for making idefications bracelets e.g. for entry and access control made of PE or PE-LD roll goods. The machine was manufactured as a special machine by the company OKU. The system has not had many operating hours and is in very good condition. Function can be summarized as follows: unrolling – punching – inserting closure parts – separating into sheets – storing. Dimensions: approx. 8m length - approx. 6m width - approx. 2.5m height Machine in well-maintained condition with few running hours Processor: roll goods 350mm wide.. Stanze: for wide and narrow Versions: Feeding route: feed path to the vibration sensors for attaching the closure parts Delivery route: display of the sheets counted in boxes... Production Machine for Identification Bracelets see pictures This production machine is designed for manufacturing identification bracelets used ...

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons Technical details in picture Find more here - / Contact us at -

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

1) Twin Vitacount 12-2 The Vitacount 12-1 is the lower cost solution designed for vitamin applications, yet it combines proven product feed technology with electronic controls and infrared count heads as used on the higher specification machines. The 12-1 features 12 product feed tracks. The Vitacount features an integrated chip and dust extraction system. A touch screen control panel allows easy access to machine and product parameters, giving the operator good visibility of the complete filling process. The product library can store up to 1000 different set-ups and offers instant recall of both product and machine parameters. Vitacount is height adjustable by means of the manually adjusted telescopic funnel arrangement to allow differing heights of bottle to be filled and the system offers maximum versatility as product feed system requires no change parts and is capable of packagin ...

Manufacturer: Passavant Model: Roepress 22.5 Condition: used Year of Manufacture: 2002 Type of Machine: Belt Press Find more here - / Contact us at -

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...

:::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 0i MC - Tool holder: BT 40 - Spindle speed: 10000 - Number of tools: 24 X-axis travel: 800mm - Y-axis travel: 500mm - Z-axis travel: 500mm - Table dimensions: 900 x 460mm - Table capacity: 500Kg :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 2300mm Height: 2850mm Weight: 4600Kg

Key data: 500 mm, 2800 mm, 3 St.

SPECIFICATIONS: Working width: max. 500 mm 2 tables with a total length of: 2800 mm Installed power: 5 kW Roller with 3 knives

Manufacturer: Pitney Bowes Model: DI 425 Condition: used Find more here - / Contact us at -

-with mobile mixing tank MBF500 /RF and tilting device KV 1000 -Working volume: 100 to max. 500 litres -Gross volume: 550 liters -Max. pressure: pressureless -Weight: approx. 2.4 tons -Control voltage: 230V/50Hz

Planetary gearbox TRASMITAL BONFIGLIOLI 9 pieces planetary gearbox max. power 20 KW Max. input speed 3,000 rpm -unused- Weight approx. 357 kg -Unit price-

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 220 to CNC control: OPERATOR OPII graphic Color Screen Size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 420 mm Stroke: 180 mm Auto. Crowning Laser monitoring Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 16 tons Accessories: various tools

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

SNACH PL01 Type 15213 Print Card

POLAR 137 ED AT 2000 Autotrim Program Air tables Polar lift Jogger RA Transomat

POLAR 176EMC 1993 Autotrim Air tables Polar lift Jogger RA Transomat

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

Machine name: Polymer dosing system Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year of Make: 2003 Content: 1000 liters Conveying / Dosing of: Powder-shaped # Chamber: 2 Control: Yes Drive motor: 1: 0.55 kW, 12 0.55 kW Version: Horizontal Dimensions: Length 2000 x Width 900 x Height 1900 mm Curb weight: 1000 kg Tech. Documentation: Yes Accessories: Dry material doser type T09K0007 Condition: Used Price: On request

Specifications: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Stroke: 200 mm Projection : 420 mm Crowning Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1-set AMADA standard tool The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Layer palletizer with intermediate layer inserter Capacity up to 600 carton/h Empty pallet magazine and pallet transport

Low-maintenance BATES robot palletizing cell for bags: + Take-off belt with square rollers, new + FANUC robot incl. control cabinet and teach pendant, overhauled + Platform for robots, new + Gripper for bags, new + Security fence incl. light barrier, new + 1 or 2 full pallet spaces + Bag dimensions/sizes e.g. flour 10.0 kg - 50.0 kg + Standard pallet sizes + Turnkey from the workshop + CE + Warranty Options: o Bag transport o Empty pallet magazine o Pallet transport o Grippers for pallets, cartons, crates, packages, buckets, hobbocks, etc. o Assembly o Commissioning

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.