overhead used for sale

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

3. Second-hand overhead crane For loading the slabs! Spam: 25 m Capacity: 5 tons Total weight: 32 500 kg

Load capacity: 250 kg Bridge length: approx. 5000 mm Bridge width: approx. 4000 mm Auction-ID: A7-49089-533

Type: P625H26 Kind of: hoist Capacity: 10 ton Drop: 13 meter Tackle speed: 0,6 & 6 m/min

A total of 7 ABUS single-girder overhead travelling cranes with a lifting capacity of 2,000 kg each are for sale. The cranes date from different years of construction and are equipped with ABUS electric wire rope hoists from the GM 820 series. Manufacturer: ABUS Crane Type: Single Girder Overhead Crane Load capacity: 2,000 kg Hoist: Electric wire rope hoist Wire rope hoist series: ABUS GM 820 Quantity: 7 pieces Years of manufacture: 1990, 1999 and 2000 Crane 1 Year of Make: 1990 Number: 851706-1 Cable: GM820F6 Crane 2 Year of Make: 1999 Number: 19/436098 Cable: GM820L06 Crane 3 Year of Make: 2000 Number: 19/447572 Cable: GM820L06 Crane 4 Year of Make: 1990 Ident Number: 851707-1 Cable: GM820F6 Crane 5 Year of Make: 1990 Ident Number: 851707-1 Cable: GM820F6 Crane 6 Year of Make: 1999 Number: 19/436099 Cable: GM820L06 Crane 7 Year of Make:  ...

TECHNICAL SPECIFICATIONS Manufacturer: HANS FEHR Kranbau Designation: Overhead crane, single-girder overhead travelling crane Type: 5.0 t Year of construction: 1979 Payload: 5,000 kg Hook path: 7.0 m Lifting speed: approx. 8 m/min Stroke speed. at fine stroke: approx. 0.8 m/min Total crane length: 11,300 mm

Specifications will follow asap

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

For sale are a total of 6 ABUS double-girder overhead travelling cranes, each with a lifting capacity of 16,000 kg and a span of 16,155 mm. The cranes date from 1990, 1999 and 2000 and are equipped with ABUS electric wire rope hoists from the GM 6160 series. Manufacturer: ABUS Crane Type: Double Girder Overhead Crane Load capacity: 16,000 kg Wingspan: 16,155 mm Hoist: Electric wire rope hoist Wire rope hoist series: ABUS GM 6160 Wire rope hoist types: GM6160F6 and GM6160L06 Years of manufacture: 1990, 1999 and 2000 Location: Heilbronn Number of units available: 6 pieces The cranes were freshly serviced in 2026, and we are happy to offer help with the expansion.

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Lifting capacity: 12,500 kg Crane track average: 13,600 mm Track average cat: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min Stroke: 5 / 0.8 m/min hook path: approx. 5.8 m with test book and documentation ! dismantled ! used, tested ! Dimensions: mm

Auction-ID: A7-49596-45

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Group: 2M Kind of: hoist Capacity: 16 ton Drop: 8 meter

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

2 KEER OP VOORRAAD Capacity: 250 kg

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Demag hoist DCS PRO 10-1000 1 TON

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

Manufacturer: GZTU Type: LNE Year of Make: 2004 Lifting capacity: 8 t Wingspan (conical vertex spacing): 10.4 m Overall width: 10.6 m Travel speed: 20 m/min 400 V / 50 Hz Net weight: 3.1 t Noise level: Lm(A) ≤ 85 dB(A) With radio remote control and documentation. More information and exact dimensions can be found in the pictures.

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

TECHNICAL DATA: Single beam system Track width: 12.9 ml Lifting height: 6 m Lifting speed: 5.00/0.83 m/min Lifting force: 2 t Installed power: 2.7 kW Voltage: 380 V COMPLETE WITH: 06 masts: 5 m each 04 Crossbars/Travel Paths: 10.35 m each

SWF-hijsinstallatie Kind of: overhead travelling crane Capacity: 10 ton Span: 17 000 mm

Cluma 10 ton x 18 600 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 18 600 mm

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

- With digital display - Two speed ranges for universal use from 60 - 2000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 I (H20) - currency: MYR PIC: - Dr Wong Sze Ting (013-939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013-628 7197/ fatimah_asmadtopglove.com.my) - Ms. Farha (011 1193 6236/ nurfarha_atopglove.com.my)

Demag hoist 10 ton Kind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

ZM coil clamp 5 ton

ZM coil clamp 15 ton

Hijshaak voor spoelen Armlengte: 930 mm

Hijshaak voor spoelen Armlengte: 800 mm

Hijshaak voor spoelen Armlengte: 1000 mm

Hijshaak voor spoelen Armlengte: 1220 mm Gewicht: 1050 kg

Demag Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm Drop: 2000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm

Abus Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 5000 mm Drop: 3500 mm

Overhead crane construction / rails / double T beam HEB - IPE Construction for bolting together from supports and crane runway rails Supports : 10 x HEB 160 at a height of 3.86 m 4 x IPE 300 at a height of 3.86 m AND Crane runway rails (welded on it with square solid material 30 x 40 mm) for screwing to the supports : 2 x IPE 300 in 13 m length 1 x IPE 300 in 11 m length 1 x IPE 300 in 7 m length For Sale Complete, total weight is about 5 tons. Price 6000 Euro net + 1140 Euro ( 19 % VAT) = 7.140,00 Euro gross VAT can be declared Price includes loaded onto truck. Viewing by appointment Shipping available for an extra charge

Abus Jib crane 250 kg Kind of: jib crane Capacity: 250 kg Span: 7000 mm

Crane Serial Number: 111-005468 Load Capacity Main Hoist: 50,000 kg Auxiliary Hoist: 25,000 kg Crane Design: Double-girder bridge crane Hoist Class: HC3 Control: Radio remote control Overload protection available Load Indicator System LIS-SV Integrated load collective memory Hoist 1 Load Capacity: 50 t Type: GM6000.50000L Lifting Speed: 0.7 / 4 m/min Hook Path: 10,000 mm Hoist 2 Load Capacity: 25 t Type: GM6000.25000L Lifting Speed: 0.7 / 4 m/min Hook Path: 10,000 mm Trolleys Trolley Travel Speed: 5 / 20 m/min Trolley Track: 3,500 mm Electrical Data Operating Voltage: 400 V / 50 Hz Equipment Radio remote control Load display Overload cut-off Load collective memory Upper/lower limit switches Trolley travel limit switches Disc brakes Electric drive Fully documented Condition Regularly maintained Recurring safety inspection available I ...

Serial Number: 111-005455 Load Capacity Main Hoist: 32,000 kg Auxiliary Hoist: 16,000 kg Dimensions From the original ABUS drawing: Span: 17,270 mm Crane Runway Length: 20 m Lifting Height Main Trolley: 8,000 mm Lifting Height Auxiliary Trolley: 6,000 mm Trolley Track: 3,000 mm Equipment Double-girder bridge crane, radio remote control, load indicator system LIS-SV, load collective memory, overload protection, electric drives, hoist limit switches, trolley travel limit switches, disc brakes, IP55, 400 V / 50 Hz Hoist 1 Type GM7000.32000H Load Capacity 32 t Drive Group 2m / M5 - Hook Path 8,000 mm Hoist 2 Type GM5000.16000L Load Capacity 16 t Lifting Speed Drive Group 2m / M5 Hook Path 6,000 mm Condition Carl Stahl Safety Inspection available Inspection Result: In Order

Serial Number Crane 26376/99 Load Capacity Main Hoist: 40,000 kg Auxiliary Hoist: 10,000 kg Dimensions Span: 23,410 mm Main Hoist Hook Path: 12,000 mm Auxiliary Hoist Hook Path: 10,000 mm Crane Dead Weight: approx. 22,500 kg Crane Design: Double-Girder Bridge Crane Hoist Class: HC3 Classification: H2 / B3 according to DIN 15018 Drive Group: 1Am (FEM) Control: Control switch on the trolley (floor operation) Overload Protection Available Electric Crane Travel Drive Electric Trolley Travel Drive Hoist 1 (Main Hoist) Type: AS 7100-16 4/1 L2 Serial Number: 5700916 Load Capacity: 40,000 kg Lifting Speed: 4.0 / 0.40 m/min Motor Power: 30.0 kW Hook Path: 12,000 mm Rope Length: 57.7 m Drive Group: 1Am Hoist 2 (Auxiliary Hoist) Type: SH 5025-20 4/1 L3 Serial Number: 3201603 Load Capacity: 10,000 kg Lifting Speed: 5.0 / 0.80 m/min Motor Power: 9.5 kW Hook Path: 10, ...

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger