otto sick used for sale

Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked

Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Otto Hänsel GmbH Type: HWR Contents: 330 l Net capacity 200kg Output: from 300 kg/h up to 800kg/h, in depend of product Enginepower: 3,8/3,1 kW Agitator speed: 90 / 45 n/min. steampressure: 10 atü steamconsumption: bis 120 kg/h Steam: Sattdampf, bis 10 bar dimensions: ca. 1500 x 1325 x 1950 mm weight: ca. 1280 kg different: Copper inner shell refurbished from the last owner, this mean checked, cleaned, defect parts changed, paints I offer this machine in checked/cleaned/painted” condition

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Otto Hänsel GmbH Type: HVK 305 Volume: up to 250kg engine: 1,5 / 1,2 HP Speed: 46 / 23 n/min. steam pressure: 10 atü steam consumption:max. 135 kg/h dimensions: 1650 x 1650 x 2000 mm (lxwxh) We offer this machine in checked, cleaned, painted” with new bears and seals' condition, without warranty

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Coffeeroaster Otto Benz 2-3 kg kilos by roast Swiss Made Run very well easy to install all parts with cyclone 230v or 380v Electric

Piston diameter: 200 mm; stroke: 24 mm

Formats: 0.25/ 0.35/ 1l, conneced load: 2.5kW.

Max. test load range: 750kg, with documentation and accessories.

REF-2085 HARD CANDY COOKER WITH VACUUM SYSTEM Manufacturer: Otto Haensel Hannover Model: Sucromat 4T. Serial no.: 17040057. Date of manufacture: 09/1977. 380V, 50Hz, three-phase, 7.0kVA, 24VAC. Dimensions: 1,400mm width, 1,850mm length, 2,200mm height.

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Otto Hänsel Model : Strada 1200 - candy embossing line for solid candies without filling, composed of: 1x Ruffinatti Flavour Mixer 1x strand former type HKR 2304 1x extrusion machine type HZU 2606 1x Embossing machine type UP 2905 with 4x embossing inserts 1x Euromec cooling channel with new belt 1x compressor and evaporator for cooling channel We offer this machine for sale "as is" to the exclusion of any warranty/warranty claims or representations. from the location Northern Europe; Unpacked

Clamping Force: 1000

Furniture trolleys, furniture and plastic rollers, furniture trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trucks, table trolleys, assembly trolleys -Manufacturer: Otto, Transportroller -Interior dimensions: 560 x 360 mm -Version: 4x swivel castors -Load capacity: 250 kg -Number: 1 piece -Dimensions: 600/400/H170 mm -Weight: 3.8 kg

Electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Construction: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

Description: Sliding Table Saw Serial Number V 412044 Speeds: 2800 / 4000 / 5500 r.p.m. Saw blade Ø: min 200 / max 450 mm Power 15A serial number: V 412044, Approx. Onsite Dimension. (l x w x h): 4,100 x 3,700 x 1,450 mm, weight approx.: 1,500 kg

16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...

Used bread slicer HERLITZIUS, type: A90 Compact - incl. 2 sickle knives - Incl. new hoses for greasing - Cutting width: 3 - 13 mm - for long loaves up to 65 cm -El. Connection: 230 / 380 V, 50 Hz, 1.1 kW - Machine has been maintained and is ready for immediate use Viewing and test run are possible by arrangement.

Bending tool, die, lower knife, lower tool, prismatic tool, beading tool -Tool: for press brake -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250 kg

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

2 x Mectec UNUSED labellers: Type: PCU IV-ACC-B4 Year of production: 2012 The labelling dispensers are both fitted with nice printing devices for batch numbers and date etc. The Labelling dispensers are fitted on really nice Danish quality conveyors from CH SYSTEMS and are also UNUSED. Their are to each station installed an UNUSED wireless scanner from SICK. Each station is installed with an UNUSED Siemens Simatic control panel to manage the stations. All parts made by high quality brands. Label height: 120mm Conveyor width: 300mm Condition: good – UNUSED Dimensions: 1.700mm x 1.850mm & 1.900mm (LxW&H) Price per machine: 3.800 EUR Price combined: 7.000 EUR

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . . Control repair needed! Details on sale!

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

Bread cutting machine Wabäma Type Economy Plus 380.220 Electronics Cutting width adjustable with sickle knife 400 volts Weight 210 kg with digital control Built in 2005

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

Wiedenmann front sickle mower working width 2100 mm, rear discharge. Air-filled tires, dome triangle Kat. 0., external nipples for blade bearings. For PTO 2,000 1/min in clockwise direction. Other mowers for various brands in stock! - Jodau environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

Manufacturer: Sick Stegmann Motor feedback Hiperface Sin / Cos periods 4096 Umd - New Type: SCM70-HYA0-K01, Attention! We have the best prices on the market and many other parts from Sick Stegmann. Buy more than 1 piece, there is still a great discount. New! The part was bought from a spare parts warehouse of a company and is completely new. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

-with barrel clip for grabbing standing 200-litre steel sicken barrels and 110 to 220-litre plastic L ring barrels and lid barrels -Brace with attachment to adapt to different barrel sizes -with a wide chassis to cross euro pallets or to line reception tubs for 1 to 2 barrels -Hand hydraulics for slightly lifting the barrel -Built in 2008 -Load: 300 kg -Lift range: 120-700 mm -Mass BxHxT: 830 x 1550 x 1100 mm

Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

various light barriers of the brands Leuze, Lehner, Sick, Jay, Guardscan Hvmo9r9 more information can be found in the PDF file

Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:        25mm Max. cutting length:            3.070mm Strokes on full length:         7mm Strokes in short 1000 length:   12 Cutting angle:                  0,5 - 2,5 ° Length backgauge:               1.000mm Number of down holders:         15 Control:                        Siemens  Safety guides:                  Sick  Operated mechanical or hydraulic:hydraulic  Power:                          45kW Length:&nb ...

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

pressure: 80 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 380 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 5.227 kg range L-W-H: 3750x1950x2400 mm Furnishing: - DELEM - CNC control model DA-53T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg

pressure: 80 t chamfer lenght: 2550 mm distance between columns: 2050 mm Control: keine stroke: 250 mm light barrier: SICK The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical connected load: 16.5 kW / 400 V / 50 Hz / 3 Ph Condition: well-kept, in working order Availability: as of now fully automatic loading trolley washing system Steam heated - 70 kg/h at 4 bar steam pressure Pump: HP centrifugal pump stainless steel - 17 bar Items to be cleaned: - Bigboxes 1000 x 700 x 700 - Bigboxes 1200 x 1000 x 800 mm Lid for small boxes Loading trolley 200 l Pump stainless steel pressure 17 bar incl. washing rack for lids of the paloxes 1000 x 700 x 700 mm incl. chemical dosing pump incl. extractor extraction length 8 m incl. steam mixing valve incl. additional nozzles for floor cleaning of the big boxes Sick sensors and Festo are used for the printing technology Motors over 0.75 kW IE3 standard

Bread cutting machine Treif Pegasus 2616 -Bread cutting machine without oiling -for long loaves -complete in stainless steel -with sickle knife -Cutting width adjustable from 4 to 14mm -mobile on wheels -Year of construction 2000

W&H Block bottom heat seal machine for air sickness bags

SICK S30B-3011BA Safety Laser Scanner Characteristics Sensor version without system connector Indoor application Protective field range 3 m Warning field range 8 m (at 15% remission) Distance measuring range 30 m Type of Field Theorem Triple Field Theorem Number of Field Sets 1 Number of fields 3 Number of monitoring cases 1 Scan angle 270° Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution 0.5° Response time 80 ms 1) Protective field surcharge 100 mm Number of multiple evaluations 2 ... 16, Configurable Automatic reset delay 2 s... 60 s, configurable Safety-related parameters Type Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (Mean Probability of Hazardous Failure per Hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function  ...

SICK S30B-3011BA Safety Laser Scanner Characteristics Sensor version without system connector Indoor application Protective field range 3 m Warning field range 8 m (at 15% remission) Distance measuring range 30 m Type of Field Theorem Triple Field Theorem Number of Field Sets 1 Number of fields 3 Number of monitoring cases 1 Scan angle 270° Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution 0.5° Response time 80 ms 1) Protective field surcharge 100 mm Number of multiple evaluations 2 ... 16, Configurable Automatic reset delay 2 s... 60 s, configurable Safety-related parameters Type Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (Mean Probability of Hazardous Failure per Hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function  ...