Manufacturer:
(Category: 1300)
Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.
Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.
Sweeping width: 1250mm, Sweeping brush: Roller brush, drive: hydrostatic, oil capacity: 25l, power: 6.7kW, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1400mm, weight: approx. 1000kg, operating hours: 1063h. On-site inspection is possible.
A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible.
Two almost identical rotary indexing tables are available, 1x TT315-04-270-RH-20-3 KA57 DRN100L4-M2A and 1x TT315-04-270-RH-20-1 KA57 DRN100L4-M5B, diameter output flange: 360mm, overall height (screw-on surface output flange) 243.5, center diameter: 90mm, max. recommended mounting plate size Ø: 2800mm, weight of output flange: 193kg, load on output flange axial force: 32kN, radial force: 17kNm, tilting moment: 5kNm. mounting plate size Ø: 2800mm, rotary table weight: 193kg, load output flange axial force: 32kN, radial force: 17kN, tilting moment: 5kNm, load center column axial force: 28kN, tilting moment: 4kNm, accuracies partial accuracy: ±22mm, axial runout at output flange: ±0.01mm, radial runout at output flange: ±0.01mm. With documentation, on-site inspection is possible.
Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible.
A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.
An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.
A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.
A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.
A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.
A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.
Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible.
A high-precision, modular Zoller V420DZ presetting and measuring machine for rotating tools is available. Measuring range X/Z: 220mm/500mm, max. tool diameter: 420mm, max. tool weight: 45kg, machine dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 1150kg. Including base frame, PC, monitor, printer and measuring software. Documentation available. On-site inspection is possible.
A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.
: 150000 kglength: 12000 mmwidth: 5000 mmheight: 1400 mm: lenkbar : lenkbar size of tyres: 645 x 250 mmdimensions: 14,4 x 5,0 x 1,4 mHeavy duty trailer with- Double steering- small turning circle- very robust, therefore low maintenance- Reversible drawbar- 50mm impregnated wooden support. (Picture is with steel pad)- Standard paint changes. On request in their Ral color.Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockersWould you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel-Length: 900 mm-Width: 40 mm-Hexagon socket-Dimensions: 900/40/35 mm-Weight: 3 kg
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 525 mm-Dimensions: Ø 42 x 525 mm-Weight: 2 kg
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 450 mm-Price: complete-Number: 4 pieces-Dimensions: 450/17/H17 mm-Weight: 0.8 kg/piece
balancer, machine balancer, spring balancer, cable extension, weight compensator-Manufacturer: Fein, Balancer spring balancer-Load capacity: 1-3 kg-Number: 2x spring balancer available-Price: per piece-Dimensions: 260/200/135 mm-Dependent weight: 3 kg/piece
: 15000 kglength: 10000 mmwidth: 2450 mmheight: 625 mm: lenkbar : lenkbar size of tyres: 425 x 260 mmweight of the machine ca.: 2,9 tdimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mmHeavy duty trailer with- Double turntable steering- small turning circle- Tilt-proof due to steering lock limitation- very robust, therefore low maintenance- Reversible drawbar, Length 1320mm- impregnated wooden support.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology-Display: 0-16 bar-Standard: EN 837-1-Number: 3x manometers available-Price: per piece-Dimension box: 200/200/H60 mm-Weight: 2.1 kg
: . : . : . dismantled: . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap-Closure cover: with spring clamp-Price: per piece-Quantity: 11 pieces-Minimum order: 4 pieces-Dimension: Ø 180 x 45 mm-Weight: 0.4 kg/piece
: 10000 kglength: 6000 mmwidth: 2450 mmheight: 587 mm: lenkbar : lenkbar size of tyres: 406,4 x 254 mmweight of the machine ca.: 2,1 tdimensions of the machine ca.: 7,2 x 2,5 x 0,6 mmHeavy load trailer with- double steering- small turning circle- Tilt-safe as steering angle limit- robust, low maintenance- reversible drawbar, Length 1320mm- 50mm impregnated wood overlay.Would you like other loads and dimensions? Please contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 265 mm-Price: per piece-Number: 2 pieces-Dimensions: Ø 28 x 265 mm-Weight: 0.8 kg/piece
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 370 mm-Price: per piece-Number: 3 pieces-Dimensions: 370/21/H21 mm-Weight: 0.8 kg/piece
Innovac GmbH
