Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-44997-12
Resolution: 203 dpi/8 dots per mm or 300 dpi/12 dots per mm; Maximum print width: 4.1 in./104 mm; Maximum print speed: 12 in./305 mm per second (203 and 300 dpi). Serial: 67J211800180Estimated weight: 16 Kg Approximate dimensions: 400x300x300 mm Auction-ID: A7-44996-65
Capacity 30 Kg, division: 10 gr, plate: 400x400mm.Serial: 1594Estimated weight: 10 kg Approximate dimensions: 600x600x900h mm Auction-ID: A7-44996-99
Equipped with: PTO speed 540/1000, Knegt 304G2 (2022, VIN DFAM1320VR0000998) is a T1a two-wheel drive compact agricultural tractor with a 3-cylinder diesel engine of 18 kW (±25 hp), maximum total weight 1,899 kg, max. Axle load 799 kg at the front and 1,100 kg at the rear, an unbraked towing weight of 600 kg, overrun braked towing weight of 1,500 kg and is intended for light agricultural and off-road work. 4 valves at the rear, 120 kg weight at the front, Auction-ID: A1-40131-76
Print speed: 100 - 300 mm/s for 203/300 dpi100 - 250 mm/s for (406 dpi); max. print width: 112 (DT)/110 (TT) mm; max. length: 4,095 mm at 203 dpi, 2,775 mm at 300 dpi, 1,016 mm at 406 dpi.Serial: 8421921569Estimated weight: 12 kg Approximate dimensions: 400x300x300 mm Auction-ID: A7-44996-76
3 Bosch condensing boilers 2000 W GC2300W Balcony box - stock of 3 pieces Auction-ID: A7-45157-1
Max. print width: 167.4 mm; max. length: 4,095 mm at 203 dpi, 2,775 mm at 300 dpi, 1,016 mm at 406 dpi; Print speed: 100 - 225 mm/s for 203/300 dpiSerial: 36121962032Estimated weight: 15 kg Approximate dimensions: 500x300x400 mm Auction-ID: A7-44996-69
Including: N°1 Needle scale with a capacity: 200 kg N° 2 bench needle scales with a capacity: 5kg and 3kg.Mixed manufacturers: BERCKEL/OMEGASerial: 1539804Estimated weight: 200 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-44996-104
B-Grading - 184.55 lm- 0.41 m3 Auction-ID: A3-44857-210306
Including shims, adjustable wedges and insulation pads. Auction-ID: A1-44065-74
Print speed: 100 - 300 mm/s for 203/300 dpi100 - 250 mm/s for (406 dpi); max. print width: 112 (DT)/110 (TT) mm; max. length: 4,095 mm at 203 dpi, 2,775 mm at 300 dpi, 1,016 mm at 406 dpi.Serial: 20921721614Estimated weight: 12 kg Approximate dimensions: 400x300x300 mm Auction-ID: A7-44996-78
Print speed: 100 - 300 mm/s for 203/300 dpi100 - 250 mm/s for (406 dpi); max. print width: 112 (DT)/110 (TT) mm; max. length: 4,095 mm at 203 dpi, 2,775 mm at 300 dpi, 1,016 mm at 406 dpi.Serial: 1421621565Estimated weight: 12 kg Approximate dimensions: 400x300x300 mm Auction-ID: A7-44996-71
Max. print width: 167.4 mm; max. length: 4,095 mm at 203 dpi, 2,775 mm at 300 dpi, 1,016 mm at 406 dpi; Print speed: 100 - 225 mm/s for 203/300 dpiSerial: 19021022052Estimated weight: 15 kg Approximate dimensions: 500x300x400 mm Auction-ID: A7-44996-87
Including lag bolts, hex studs, chip board screws, nails, nuts, washers, self-drilling screws, connecting nuts, wing nuts,... stainless steel and metal Auction-ID: A1-44065-84
Type: Hydrostatic (HST), Gears: 2-range (Low / High), Operation: foot pedal forward/reverse, Hydraulics, Pump capacity total: ±23 l/min, 3-point linkage: Cat. I, Rear lift capacity: ±650 kg (with ball), PTO, Rear: 540 rpm Auction-ID: A1-40131-73
Lot electric motors (2 pieces) Make SIEMENS Type: 1AV3105B 1LE10031AB522FB4 400 V, 50 Hz, 3.0 Kw, 1450 rpm Make AC motors, type: FCA 100LC-4/PHE 400 V, 50 Hz, 4 Kw, 1440 rpm Condition: See photos, unused Auction-ID: A7-40841-220
Equipped with: CW10 connection. Auction-ID: A1-40131-302
990 € 
