Manufacturer:
(Category: 1300)
Properties Volume 2160 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 1200 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet
An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.
Dressing MARTIN T51 -used-noise-insulated table lips, joining bar, motor brake---------- Technical data ----------planing width: 51 mm, table length: 2,520 mm, max. chip removal: 16 mm, diameter planing shaft: 120 mm, number of blades: 2 pieces, swivel range dressing stop: 0-45 Â, suction nozzle: 140 mm, motor power: 4.8 kW
Thick SCM S 63 -used-link pressure beam, under-table roller, separate feed motor---------- Technical data ----------planing width: 630 mm, number of knives: 4 pieces, passage height: 235 mm, feed speed: 6 /9/12/18 m/min., suction nozzle Ã: 180 mm, weight: 1035 kg
Manufacturer: Siemens Model: Avanto Year of Manufacture: 2011 Year of Installation : 2012 Type of Machine : Whole Body Magnet Resonance Imaging (MRI) System Magnet strength: 1.5 Tesla Helium level : between 65-69% MAGNETOM® Avanto, A Tim+Dot System is the landmark in 1.5T imaging due to Tim technology® in combination with a dramatic reduction in acoustic noise, and a comprehensive application range up to 205 cm whole-body imaging. With the integration of Dot®, the power of Tim is multiplied resulting in greater image consistency and diagnostic confidence, greater ease-of-use, and a day that´s more productive than ever before. Find more here - / Contact us at -
Properties: Volume 1500 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1500 mm Cylinder height 1800 mm Diameter width 800 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description: Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 forward-drawn residual drain pipe with disc valve DN 32 4 feet
Subject to prior sale - errors possible! Internal reference number: D-1143-5
Thickened SAC RS/530 -used-link pressure beam, electric height adjustment, under-table roller, separate feed motor---------- Technical data ----------planing width: 530 mm, number of blades: 4 pieces, passage height: 240 mm, feed speed: 7 / 14 m/min., suction nozzle Ã: 140 mm, motor: 4 kW, weight: 840 kg
Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg
Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications
bale press, which had been used for cardboards. serial numbers: PES354653, PES354654 pressing force 50 tons Bale Size: 1200 x 800 x 1100 mm Bale Weight Paper: 350 - 450 kg
BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
Combination machine FELDER BF6-26 -used-circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, self-adjusting knife shaft---------- Technical data ----------planing width: 260 mm, number of knives: 2 pieces, planing shaft Ã: 86 mm, passage height: 220 mm, dressing table length: 1300 mm, cutting width: 780 mm, swivel range circular saw: 0- 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 0-45 Â, useful length milling spindle: 120 mm, max. cutter diameter: 220 mm, max.
Ceiling laser LAP LASER CAD-PRO -used retrofit set suitable for:, e.g. HOLZ-HER ProMaster, Dynestic, Epicon, incl. Ethernet gateway LAP, 4 targets, swivel, with bracket---------- Technical data ----------Projection color: green, Supply voltage: 24 V DC, LAP connection cable: 25 m
Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg
Eurolux GmbH & Co.KG
