Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!
The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine ...
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
Busch two-stage pump level: Data Pump status: Type: BNV 1000 AVacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/hEnd pressure: 0.05mbar (abs.) Data Booster:Type: WV1000BSuction power: 1000m3/hEnd pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition)Including: vacuum pre-filter, oil fillingPerformance: 3 months; ready for use
Leybold pump level Data on pump level:RUTA - Pump system RUTA 1001 (20900895586) (02209=Pre-pump:Leybold Sogevac SV300Cat: 109 31booster pump: Leybold Ruvac WAU1001Kat: 11741Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leakPerformance: 3 months22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use
Washing machine Pero3/u (2 tank) with odolejaczem
Raw steel DN 1000 wall thicknesses from 11.9-15.7 mm PE coated inside coated length: 1-3 m in short pieces 5-18 m long pieces Inside length 18 m coated steel pipes DN 1200 PE-jacketed
High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology
QUASAR 1200 kN tractor / universal testing machine This is the replacement for an outdated, uneconomical hydraulic tractor testing machine / universal testing machine. Concerns when purchasing a used (hydraulic) universal test machine that will almost certainly be modernized with new electronics for WIN 7 or 10. In addition, used machines often have other (hidden) defects, such as a knocked-out central spindle of the lower clamping head. Quasar 1200 kN with the latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine designed by finite elements FEM for tests on steel, reinforced steel, screws, wire ropes and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, fut ...
Element welding Turntable werkstueck drehvorrichtung
Do not buy a used tractor tester 100 kN or smaller: In almost all cases, the electronics for WIN 7 or 10 need to be completely modernized. For the purchase of the used universal testing machines, pick-up, refurbishment and their retrofit, you will receive a new machine (!) from GALDABINI from us Quasar 10 kN latest technology (BECKHOFF electronics) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable 2-acid universal test machine constructed using finite elements FEM Available load cells: 10 N | 20 N | 50 N | 100 N | 250 N | 500 N | 1 kN | 2.5 kN | 5 kN | 10 kN for tests on plastics, rubber, foils, textiles, components, assemblies and much more Very well Made in Italy | Europe, e.g. with German + European quality components + assemblies ergonomic design, flexible, future-oriented design Extreme signal resol ...
Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special priceThe machine state is as new.Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements.Price includes:- Machine 100 % functional- incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N)- warranty 24 month- software Graphwork 6 (actual)- without clamping heads (as option)- without costs for delivery (depending on distance)- incl. setup, trainingOptional:- clamping heads- bending support- compression plates- extensometer- climatic chamberEven everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for ...
Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...
Universal Haertepruef machine with high-quality general recovery Vickers / Brinell / Rockwell with performance optional also with modernization for Vickers / Brinell / Rockwell with PC connection general ueberholt with warranty for standard compliance
FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser ...
Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special priceThe machine state is as new.Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements.Price includes:- Machine 100 % functional- incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N)- warranty 24 month- software Graphwork 6 (actual)- without clamping heads (as option)- without costs for delivery (depending on distance)- incl. setup, trainingOptional:- clamping heads- bending support- compression plates- extensometer- climatic chamberEven everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non ...
Impact tester with motoric hammer lifting and protection housing- ready equipet for testing according CHARPY ISO148 (EN10045)- Demo-Machine (as new)- potential energy: 300 Joule- alternate models: 150 / 300 / 450 / 600 / 750 J.- warrenty period 24 month- see also the photos of optinonal items; new
Claw vacuum pumpdryManufacturer: BuschType: Mink MM 1322 AVMotor: DS 400VSuction power: 300 m3/hEnd pressure: approx. 150 mbar (abs.) Performance: 12 monthsCondition: Newashoer: suction filter; Operating instructionsDelivery time: short-term; ready for use
Claw vacuum pumpdrymanufacturer: BuschType: Mink MM 1252 AVMotor: DS 400VSuction power: 250/300 m3/hfinal pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructionsDelivery time: short-term; ready for use
Rotary vane vacuum pumpManufacturer: LeyboldType: Sogevac SV280Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Waelz piston pump (rootsblowesis)Manufacturer: PfeifferType: WKP 2000 ASuction suction systems: approx. 2065 m3/hengine: 5.5 KWCat. Nr.: PP W61 000Status: GeneralueberholtGewaehrleitung: 12 monthsIncluding: oil filling, user manual; ready to use
Rotary vane vane vacuum pump- packaging Manufacturer: BuschType: 251-512Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use
Rotary vane vacuum pump- packaging-Manufacturer: BuschType: 220-80Vacuum: 0.5 mbarStatus: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Rotary vane vane vacuum pump- packaging Manufacturer: BuschType: CB0251BVacuum: 0.5 mbarStatus: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.
Waelz piston pump (roots blow-Manufacturer: PfeifferType: WKP 500 ASuction moulds: approx. 500 m3/hCat. Nr.: PP W31 001Status: GeneralueberholtGewaehrleitung: 12 monthsIncluding: oil filling, operating instructions; ready to use
Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use
Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use
Rau GmbH
