other machines and plants used for sale (14,190)

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Incubator with control up to approx. 80°C with approx. internal masses 400 x 500 x 350

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

OFFFER OF THE FOLGENDEN ARTIKEL Number: SD001 Number: 1 apiece Shoe repair centre (cleaning machine, etc.) Factory: Hardo Type: unknown/no type recognizable Accessories: various accessories (see pictures) Dimensions above all: Width 1540 mm x height: 1790 mm x Tife: 790 mm State Note! See also the Foto/photos about the condition. Note! Only the described item is sold. Nothing else that can be seen in the pictures.

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

Pneumatic cylinder Manufacturer: TOX Type: K08. 81.200.12 Force 70 kN at 6 bar air pressure Total stroke: 200 mm, of which power stroke 12 mm max. with total stroke adjustment via hand-adjustable stop screw to the exact x-mass adjustment All information without guarantee

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Our Sogevac SV300 rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Our Leybold Sogevac SV300 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Our Ruvac RA7001 roller piston vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold RUVAC RA7001 Roots-blower pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Leybold E250 locking valve vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Leybold E250 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

The OPTIV REFERENCE 763 DUAL Z combines a tactile and optical measurement. The Data acquisition via a switching/measuring switch laser as well as white light sensor (chromatic white light sensor/CWS). Measuring range: 600 x 600 x 300mm. Maximum workpiece weight: 150 kg, when using the Glass plate / transmitted light measurement: 50 kg. Accuracy depending on the measuring procedure: 0.5 -. 1, 3μm. machine weight: 3 000 kg. Dimensions (Lxwxh) machine: 1.805 x 1,918 1,890 mm. service area of min. 600 mm. The machine is active and can by arrangement rootstyle are. If you are interested we can provide the entire machine data to the Available.

Qty. 1 Second-hand vertical band saw Mfc.: Ermas Type: 8090 Built: 2003 Block before sawing Height: max. 500 mm Width: 340 – extendable to 500 mm Length: 340 – extendable to 500 mm Finished block dimensions: 380-500 x 150-160 x 150-160 mm – H x L x W Sawing band wheels (2) dia.: 1250 mm Band speed: 900 – 3500 m/min. Diamond coated sawing band: 41 x 1.3 x 8430 mm Blade motor power: 22 kW Blade tension: Hydraulic Lubrication: Water (closed circuit) Clamping: Hydraulic Cabin: Closed with automatic door Crops evacuation with manipulator: Hydraulic

Qty. 1 Second-hand vertical saw Mfc.: COSEN Type: SVT-6070H Built: 2015 Capacity Height 600 mm (23.6") Capacity Throat 700 mm (27.69") Cutting Length 1250 mm (49.2")) Blade Speed: 20-80 m/min (65-262 ft/min) Blade Size (LxWxT): 6040x54x1.6 (237.8"x2"x0.06")

Qty. 1 Second-hand plate saw Mfc.: Mayer Model: PS3 E Built: 1989 – new electrical panel in 2010 Plate dimensions: Length: 3100 mm Thickness: 70 mm Saw Motor power: 11 kW, 2890 RPM Blade dia.: 350 mm Blade tension: Hydraulic Footprint: 5700 x 7500 mm –W x L Lubrication: Micro-spray ACCU-LUBE

The Pester machine is a two-station palletizer fitted with KUKA (KR16) robot technology. The cartons are palletized by the Pewo PAL 6 form on pallets according to a product-specific palletizing scheme.

Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation

FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystall ...