other machines and plants used for sale (14,160)

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...

Used VACUUM CHAMBER. Device designed for structural impregnation of mushrooms with water or preservative solutions to specific technological parameters. Dutch production FTNON. Capacity - Pallet 1200X1000 mm (approx. 500 kg of mushrooms in 3 kg boxes). Fully automatic. Additional tank with a mixer and automatic additive dosing pump. Fully automatic cycle. Very good condition. Full documentation. Stainless steel.

We have MIWE roll-in stoves for sale Price 2 000euro

Complete low caloric gasifier with CHP (New technology!) Input; 800-1500kg/h - Chicken manure, ricehusk, reed, hay. roadside grass. Output; 750kWe, 1400kWt en 300-500kg/h biochar. +280kg/h amporpheus SiO2 Output; 300-400m3 Syngas Scope of supply; -Complete Guascor CHP System & syn gas engine -Gas analyse lab -SynvaTor Reactor -Elevator -Redler -Ash disposal screws -Syngas filters -Syngas cleaners -Heat exchangers -Rotary valves -Screws -Oxiburner -Control cabinets -Operator room -Gasbuffers -Heat buffers -All fans -All compensators The site is currently open for visits and inspection!

We offer trolleys in various sizes 60x80 = 23 pcs 100x60 = 40 pcs 65x48 = 2 pcs 90x75 = 2 pcs 39x59 = 1 pc 83x61 = 1 pc 40x60 = 1 pc 64x64 = 1 pc TRANSPORT: 60x80 = 5 pcs 78x56 = 1 pc 60x82 = 1 pc For the furnace: 100x60 = 50 pcs 60x80 = 14 pcs FOR COOLING BREAD 1pcs - 120x40 1pc - 100x40

Storg BvbA The Storg BvbA plant has the following scope of supply 2x demountable mesophilic digisters 1x thermophilic digester consisting of concrete. However, only the roof can be dismantled 3x Buschmann mixers incl stainless steel piping, control cabinet and frequency controllers 1x Active carbonfilters 1x Guascor HGM560 (1,300kWe) 1x Waukesha APG1000 (1,000kWe) 1x Cummins Diesel (1,000kWe) 1x Gas pretreatment line + gas analyses stations 2x Transmorfators (1250KVa + 2500KVa) 4x Emergency coolers 2x Hygienysation line (15.000L Incl mixers and HEX inside tanks 1x Scales 1x Hydro unit 1x Stainless steel mixing tank 10,000L incl mixers 3x Silo (150T) 1x Command block compressed air system + Spare parts Walking floors, piping, grinders, gas analyzer, Vogelsang pumps, flowmeters, shredders, HDPE Urea tank, waterlocks and control boxes, screws are included in this price  ...

Extraction table Italmarmi Meccanica AIR 3 (Ref. No. 523-2718) Specifications: Stainless Steel / Inox Removable table extension 1,000 x 600 mm 2 side work rails 4 230 V sockets Dimensions: LxWxH 3,500 x 1,580 x 2,450 mm Support surface table 2,000 x 950 mm Year of Make: 1995 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor

D+L Welding Inverter AC DC TIG 200 P AC/DC, TIG-TIG 200 A 230 V Weight approx. 25 kg

Electric stair climber Payload 200 kg Work safely and effortlessly Suitable for step heights up to 210 mm Robust aluminium housing foldable / fold-out incl. charger one battery charge is sufficient for approx. 1600 steps suitable for indoor and outdoor use Weight incl. batteries approx. 30 kg

PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg

MITROPOWER Diesel Generator PM 7500 TD Max. power 6.5 kVA Diesel engine 500 cc, 4-stroke, 1-cyl., direct injection Mains voltage 230 V Fuel tank capacity 14.5 L Electr. Constant voltage regulation Dimensions (LxWxH) 955 x 525 x 680 mm Weight 170 kg

MITROPOWER Diesel Generator PM13TA1-3 Rated power 11 kVA Max. power 12 kVA Mains voltage 400/230 V Rated current 15.8 A / 27.6 A Fuel tank capacity 25 L Water-cooled Noise level 72 dB (A) Weight approx. 331 kg LxWxH 1240x700x950 mm

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds

MACC Iron Bender "Piegaferri" Steel construction with hardened jaws 100 x 7 mm Vise with eccentric clamping Footprint 330 x 330 x 300 mm Weight approx. 35 kg

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.

MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased

MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg

JET Thickness Planer JWP-12 Max. planing width 318 mm Thickness Clearance 6-153 mm Power 230 V, 1.8 kW Dimensions LxWxH 70 x 60 x 50 cm Weight approx. 33 kg WE share possible !

Trowalization system 2-fold Connection 400V (Opening see sketch)

1 Karlsruhe cooling tower system with 2 fans Type: KD 2/12 - 34-3 Fabr. No. 7522, power 2,232 KV with complete frame with complete rust removal Shut down End3e 2023, completely on site on the production roof,