Manufacturer:
(Category: 1300)
Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology-Manufacturer: Wika, pressure gauge-Type: 0 to 160 bar-Screw connection: see photos-Dimension: 105/45/H145 mm-Weight: 0.8 kg
Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology-Manufacturer: Wika, pressure gauge-Type: 0 to 250 bar-Screw connection: see photos-Number: 2x manometer available-Price per piece-Dimension: 100/85/H100 mm-Weight: 0.9 kg/pcs
Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge-Manufacturer: Richter, manometer pressure gauge with limit signal transmitter-Type: 0 to 6 bar-Limit signaller: Type M1-Screw connection: see photos-Dimension: 170/135/H135 mm-Weight: 2.1 kg
Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology-Manufacturer: Afriso, capsule pressure gauge, unused OVP-Type: KP100 0/600 mbar-Art.-No.: 35123301-Screw connection: G1/2 B rad.-Number: 2x pressure gauges available-Price: per piece-Dimension box: 140/110/H55 mm-Weight: 0.4 kg/piece
Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank-Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized-Contents: 455 L-Operating pressure: -0.6 bar / max. 16 bar-Accessories: including attachments see photos-Number: 2x containers available-Price: per piece-Dimensions: 860/650/H1610 mm-Weight: 374 kg/piece
Connection line, connection cable, cable line, socket cable, socket line, sensor line-Manufacturer: Murr Elektronik, M8 female 0° free cable end unused OVP-Type: 7000-08041-2100500-Mat-No.: Code 47218-Dimension package: 220/220/H10 mm-Weight: 0.2 kg
Tire with rim-Tire size: 16.00 R20-Dimension: Ø 1320 mm-Weight: 246 kg
Slide valve, 4WEH32Q63/6EG24N9EK4/B10MH, R901402242, Rexroth, used Please note: This is an original Rexroth product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used The part was bought from a spare parts warehouse of a certified company and is in very good condition. The valve was removed from a Bühler die-casting machine and consists of: - Slide valve, 4WEH32Q63/6EG24N9EK4/B10MH, R901402242, Rexroth, max. 280 bar, used - Directional spool valve, 4WE6J62/EG24N9K4/B10MH, R901402267, Rexroth, max. 350 bar, used - Approx. 40 kg Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will ref ...
Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.
Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.
Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...
Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, ...
Galvanized steel hall, kits for screwing Dimensions approx. : 12 m long 2.5 m wide 2.27 m Height Front 2.57m height rear Completely clad including sheet metal and fire door Shipping surcharge available VAT can be declared Price : Net 3.361,34 + 638,65 ( 19 % VAT) = 3.999,99 Euro gross
A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible.
Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.
Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.
An ABB robot in its original packaging is available. Payload: 180kg, reach: 3150mm, weight: approx. 1750kg. Documentation available. An on-site inspection is possible.
A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January.
A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stainless steel container, refrigerant dryer and screw compressor. The conveying elements were integrated used and may need to be renewed if required. Documentation available. An on-site inspection is possible.
An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible.
Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible.
Pagus Maschinenhandel Online Shop
