british flag
Resale Logo

oss used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords oss > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465357 103  

DECKEL FP 1 for sale
Tool room milling machine


No. R 56716-08, with digital display for lateral axis. Clamping surface of the solid table 195 x 605 mm Table movement along autom. and hand 290/300 mm Table motion vertical machine. and hand 330/340 mm Spindle stock ...
used machine
 
No. R 56716-08, with digital display for lateral axis.
Clamping surface of the solid table 195 x 605 mm
Table movement along autom. and hand 290/300 mm
Table motion vertical machine. and hand 330/340 mm
Spindle stock Cross movement by hand 150 mm
Spindle carrier ISA 40
Spindle speeds from 40 to 2000 RPM.
Spindle drive 1/1.4 kW
Weight approx. 660 kg

Accessories: separate control cabinet.
 
Price  
    request
125464762 1101

DETROIT Diesel 16VF003550 - 730 kVA Generator - DPX-11134 for sale
Diesel Generators


; Gross weight [kg]: 8750; Engine: Detroit Diesel 16VF003550; Accessories: Control Panel
used machine
 
; Gross weight [kg]: 8750; Engine: Detroit Diesel 16VF003550; Accessories: Control Panel
1989
14,500 €  
  NL   request
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125463344 1513

IVECO MTD.CNM.350 Generator 500kVA With Hot Water Boiler for sale
Scissor lifts


; Power [PS]: 475; Gross weight [kg]: 18000; Engine: Iveco; Accessories: Generator 500kVA With Hot Water Boiler, , MHKW Systems., , Manufacturer Engine: Iveco, Typ Engine: MTD, CNM, 350, Manufacturer Generator: AVK, Typ  ...
used machine
 
; Power [PS]: 475; Gross weight [kg]: 18000; Engine: Iveco; Accessories: Generator 500kVA With Hot Water Boiler, , MHKW Systems., , Manufacturer Engine: Iveco, Typ Engine: MTD, CNM, 350, Manufacturer Generator: AVK, Typ Generator: DSG52M1.4, Year: 1994, Fuel: Diesel, Serial Number Engine: 000173, Serial Number Generator: 66162
1994
13,000 €  
  NL   request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125463356 1513

CTE CS170E Bi-Energy, 17 m Working Height, Fits Throug for sale
Scissor lifts


; Gross weight [kg]: 2000; Rear tyres remaining: 90; Front tyres remaining: 90; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2000; Rear tyres remaining: 90; Front tyres remaining: 90; Maximum lift capacity [kg]: 200
2008
17,500 €  
  NL   request
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125463358 1513

GENIE IWP 20S Electric, 8.2m Working Height. for sale
Scissor lifts


; Gross weight [kg]: 802; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 160
used machine
 
; Gross weight [kg]: 802; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 160
2013
5,900 €  
  NL   request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125463360 1513

GENIE Z34/22N Electric, 12.5m Working Height. for sale
Scissor lifts


; Gross weight [kg]: 5216; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 5216; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
2003
8,900 €  
  NL   request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125463362 1513

GENIE Z34/22N Electric, Jib, 12.5m Working Height, Non m for sale
Scissor lifts


; Gross weight [kg]: 5229; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 5229; Maximum lift capacity [kg]: 227
1998
6,900 €  
  NL   request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125463364 1513

GENIE Z45/25 4WD Diesel, 4x4 Drive, 16m Working Height, for sale
Scissor lifts


; Gross weight [kg]: 6300; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 6300; Maximum lift capacity [kg]: 227
1999
9,800 €  
  NL   request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125463366 1513

GENIE Z45/25J Electric, 16m Working Height, Jib. for sale
Scissor lifts


; Gross weight [kg]: 7323; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 7323; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 227
2004
12,900 €  
  NL   request
125465317 2486

PKW M1) VW Golf for sale


last off Code: BH-67262 Matriculation year: 15.12.2008 elapsed. Mileage: 264.010 km Power: 77 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-67262
Matriculation year: 15.12.2008
elapsed. Mileage: 264.010 km
Power: 77 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1KM / ACBLSX0/FM5FM5A4009N7GGN1
FIN: WVWZZZ1KZ9M289084
Equity / total weight: 1.361/1,990 kg
Color: Blue
Body: hatchback
Equipment: material facilities, 5-speed manual transmission, Electr. Power Windows front and rear, trip computer, air conditioning, roof rails colour: black
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: scratches and rust spots at hood, paint damage on front bumper right front, abrasions wheel box left rear;
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-12-384-6284 and 2310-41-000-8564
 
Price  
    request
125463368 1513

GENIE Z60/34 4WD Diesel, 4x4 Drive, 20.4 m working Heigh for sale
Scissor lifts


; Gross weight [kg]: 10144; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 10144; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 227
2015
47,500 €  
  NL   request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125463370 1513

GENIE Z62/40 4WD Diesel, 4x4 drive, 20.9m Working Height for sale
Scissor lifts


; Gross weight [kg]: 10366; Rear tyres remaining: 80; Front tyres remaining: 80; Maximum lift capacity [kg]: 227
used machine
 
; Gross weight [kg]: 10366; Rear tyres remaining: 80; Front tyres remaining: 80; Maximum lift capacity [kg]: 227
2015
49,800 €  
  NL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Surface Grinding Machine BLOHM HFS 512


Grinding length: 800mm, grinding width: 400mm, workpiece height: 300mm, magnetic clamping plate dimensions: 1200x500mm, table adjustment longitudinal/ cross: 1200/ 260mm, table speed: 2-300m/min, length: 4200mm, width: 2000mm, height: 2400mm, weight: 6.3t.

CNC Lathe MONFORTS RNC 500 MultiTurn


Clamping surface diameter: 356mm, turning length: 1000mm, swing over bed/ cross slide: 600/ 425mm, internal draw tube diameter: 86mm, number of tool stations: 12, max. rotational speed: 4000/min.

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Concrete block making machines Prometal RHP 500


With RHP 500 concrete products machines we provide excellent medium level entry solution, and also long term solution for many customers. These machines combine durable, heavy duty construction with possibility for assembly various concrete product lines - from simple to fully automatized. Production of high quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks etc... RHP 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Zirkon Supra 660


Zirkon Model Supra 660 4 color Year: 1990 Cutoff: 452mm Max speed: 42.000 p/h 1 Enkel reel stand with reel travers 1 Infeed with web guide control 4 Zirkon printing-units with Baldwin alcohol damping and Baldwin blanketwashing 1 Dryer MEG Sigma plus year: 1997 1 Chillstand with webguide and silicon 1 JIMEK Perforater unit 1 superstructure with turnerbars and slitting knives 2 Zirkon folders with one chopper folder and one double chopper 1 Planatol gluing system even crossgluing Bcdjekyxh3 1 Quadtech RGS 4 register controll 1 Quadtech cutoff control 2 Gämmerler trimming RS 92 2 Gämmerler bumpturn 1 IVT tempcontrol ink vibrator, chill roller, alcohol mixer 1 IVT ink distrubition with 4 pumps for ink container connection 2 Color Control pults remote ink 1 Machine Controll pult 1 plate bench and punch Full documention: electrical,mechanical and other manuals! Perfect for 8 page A4 or 16 page A5! Single production or double production 4 page A4 or 8 page A5. We ship worldwide.

Heidelberg SORMZ


ref. 217 Heidelberg SORMZ format 52x74 cm, year 1998, 87 mio. imp., alcohol dampening, 10 000 s/h, stock range 0,03-0,8 mm, print test possible, price: 34 000 EUR FCA

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Circular Sawing Automatics Abcd Machinery AUTOCUT550


AUTOCUT 550 Automatic sawing machine with automatic feeding for cutting at 90°. Equipped with automatic feeding system fitted with Brushless moter driven by numerical control “touch screen”. Bar-end detection device. Clamping of the bar by “bridge” system. Possibility to load and save cutting lists in CSV format with USB and ETHERNET connectivity. Spray mist lubrication (Venturi). Threephase motor 5,5KW.

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Man Roland 202 TOB


Man Roland 202 T0B Two Color Offset Machine Year: 1996 Size: 52x74 cm. Impression: 21 Million Rolandmatic Dampening 4 Gripper Plate puncher is included Under Power – Test Possible Located in Turkey Available immediately

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Bread and biscuit cutting machines REGO-HERLITZIUS ROTO-SHOP


Bread slicing machine-mounted ROTO-SHOP manufacturer REGO-HERLITZIUS. The device the smooth technically, after review, housing stainless steel, on wheels, shelf for sliced bread. EU VAT invoices (%). Possible shipping forwarding company at a price of around 150-200 Euro.

Lathe GRAZIANO SAG 210


Center height: 225mm, center distance: 1000mm, swing over bed: 268mm, rotational speed: 45-2400/min, bore: 57mm, cross slide travel: 240mm, top slide travel: 130mm, feed rate: 0.019-0.3mm/U, quill stroke: 200mm, quill diameter: 68mm, length: 2700mm, width: 1400mm, height: 1400mm, weight: 2.3t, when overheated the machine shuts itself down.

Folding machines HORIZON AFC A43


2 pocket vacuum suction fed folder with electric cross knife MIN SIZE 150x210 MAX SIZE 430x650 PAPER mm/40-240 gr/m2 Min. fold: 65 mm

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs

Fermenting Tanks Vertical CCT 4 x 2650 hl Hinke kft, Hungary 2650 hl / 2500 hl - insulated


Fermenting Tanks Vertical CCT Hinke 4 x 2650 hl Tanks are made by Hungarian Hinke kft in. They are made on normal steel and special coated for this purpose, self-standing PU foam insulated and cooled with glycol-water solution cooling and they have 4 + 1 (cone) cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 4 identical tanks, all equipment with CIP bowl, legs, service platform, vacuum and overpressure safety valves. Technical data: Volume Gross 2650 hl, net 2500 hl Made by Hinke kft, Number of tanks 4 Pressure 1.0 bar Insulation PUR foam 150 mm Cooling media Direct NH3 Number of cooling zones 4 + 1 (cooled cone) Diameter 4500 mm (4800 with insulation) Height 22480 (without legs) Weight 24400 kg

Fermenting Tanks Vertical CCT 20 x 1150 hl Hinke kft / Alfa Laval 1150 hl / 1000 hl


Fermenting Tanks Vertical CCT Hinke 20 x 1150 hl Glycol Tanks are made by Hungarian Hinke kft in year 1984. They are made of stainless steel, skirt supported, PU foam insulated and cooled with glycol-water solution and they have 4 cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 20 identical tanks, all equipment with CIP bowl, service platform, vacuum and overpressure safety valves. Tanks have recently installed valve panels made by Alfa Laval. Technical data: Volume Gross 1150 hl, net 1000 hl Made by Hinke kft, / Alfa Laval Manufacturing year 1984 Number of tanks 20 Pressure 1.0 bar Insulation PU foam 150 mm Cooling media Glycol-Water Solution Number of cooling zones 4 Diameter 3500 mm (3800 with insulation) Height 14750 Weight 13250 kg

Fermenting Tanks Vertical CCT 10 x 2650 hl Hinke kft, Hungary 2650 hl / 2500 hl - NH3


Fermenting Tanks Vertical CCT Hinke 10 x 2650 hl - NH3 Tanks are made by Hungarian Hinke kft in year 1995-2000. They are made of stainless steel, self-standing (with legs) PU foam insulated and cooled with direct ammonia evaporation and they have 4 + 1 (cone) cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 10 identical tanks, all equipment with CIP bowl, legs, service platform, vacuum and overpressure safety valves. Tanks are in good condition. Technical data: Volume Gross 2650 hl, net 2500 hl Made by Hinke kft, Manufacturing year 1995 Number of tanks 10 Pressure 1.0 bar Insulation PUR foam 150 mm Cooling media Direct NH3 Number of cooling zones 4 + 1 (cooled cone) Diameter 4500 mm (4800 with insulation) Height 22480 (without legs) Weight 24400 kg

PET Bottle Filling Line 36000 bph KHS Innofill, GEA, SIG cabonated and non-carbonated


PET Bottle Filling Line for carbonated or non-carbonated beverages 36000 bph This is a complete blow molding, filling and packaging line for carbonated or non-carbonated beverages having a capacity of 3 500ml with 28mm caps featuring KHS Rinser-Filler-Capper and Paramix Carbonating Blending Skid The heart of this line, the KHS Innofill PET Rinser-Filler-Capper relies on computer-controlled precision technology for careful and accurate filling of your carbonated and still beverages in PET bottles. Using volumetric filling, you can fill bottles to exact fill levels at high speeds with both lightweight and premium PET bottles. This Innofill PET DRV operates as a triblock machine, with a bottle rinser and capping turret. Short times for product and bottle changeovers reduce product losses and improve efficiencies. The KHS Paramix CMX Blending Carbonating System Is suitable for preparing fruit juices, juice beverages, carbonating mineral water and soft drinks allowing for clean, foam-free filling and excellent water deaeration

Laser Cutting Machines BLM ADIGE GROUP LT823D


Laser 3D BLM ADIGE GROUP LT823D for tubes and profiles was built in the year 2010. Technical data laser 3D BLM ADIGE GROUP LT823D: -CNC control: SIEMENS Sinumerik -head: 3D -crystal resonator: Rofin -worked hours: 36979 h Operating data: -the minimum length of the workpieces: 3200 mm -maximum length of details: 6500 mm -maximum weight of workpiece line: 15 kg/m -maximum weight of workpiece total: 100 kg The dimensions of the parts: -round: 12-140 mm -round (optional): 12-152.5 mm -square section side: 12-120 mm -rectangular cross-section and flat oval: maximum described: 170 mm -minimum size: 10 mm -the maximum dimension: 140 mm -the maximum dimension of the side (optional): 150 mm -the maximum difference between the sides: 110 mm -the minimum difference between the sides: 5 mm -maximum load capacity of the loading table: 4000 kg -maximum length of unloading table: 4500 mm Overall dimensions (l x p x h): -the whole installation without content 4500DC K 20/25:15556 x 4600 x 2237 mm -machine: 10514 x 4600 x 2237 mm -the weight of the machine: 9000 kg Hydraulic system: -tank capacity: 25 l -flow rate: 25 l/min -pressure: 70 bar Pneumatic: -pressure: 6 bar -flow rate: > 500 Nl/min

Universal Tool-Milling Machines DECKEL FP1 AKTIV DIGITAL


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm], -Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°, -Horizontal spindle ISO 40, -Tilting swiveling table type 2114, -Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm] -Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm], -16 different spindle speeds from 40 to 2000 [tr/min], -Variable power feeding from 5 to 500 [mm/min] in all 3 axis, -Rapid feeding in all 3 axis - 1200 [mm/min], -« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis, Bcblv9kxbw -Coolant pump + LOC LINE coolant hose, -Centralised automatic lubrication, -Spindle electro-brake, -Electrical cabinet seperated from the machine, -Main motor power 2.0 kW, -Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm], -Weight : 695 Kg approx. Original DECKEL operators manual, service manual and electric plans included. Machine in very good condition, visible under power. Loading included, shipping possible Worldwide. Price VAT Excl. on request. SARL Kraffter Lieu dit Le Sourd 73520 Saint Béron, FRANCE Tel: +33(0)6-73-30-03-87 VAT N°: FR 17 819 707 167

CNC Long Turning Machines NILES 7000 CNC


Height of centres mm 500 Distance between centres mm 7400 Swing over bed mm 1000 Swing over cross slide mm 700 Swing in gap mm 1100 Effective lenght in gap mm 500 Wide of bed mm 740 Spindle nose 11" Spindle speed: 560RPM Spindle bore mm 87 N.2 Plataform diam. mm 1000 Weight Kg.19000 CNC MITSUBISHI 700 M70 N.2 Self centering chuck diam.600 N.1 Self centering chuck diam.420 N.1 Plateau diam.1000 N.1 flange diam.600 N.2 Steady rests diam. 600 N.2 Steady rests diam.370 N.2 Open rests diam.280 N.1 Roller bezel Coolant system with tank

Measuring Machines POLI SPA


TYPE precision jig boring machine CROSS TRAVEL 1400 mm. AXIS X 3000 mm. 1600 mm VERTICAL STROKE. NOTES Plan 3000 x 1500 mm. -# 6 support columns and leveling

CNC Milling Machines DECKEL MAHO DMU 50M


DECKEL MAHO DMU 50 m 5 axis cnc milling machine The DECKEL MAHO DMU 50 m 5-axis cnc milling machine is a small-scale 5-axis milling machine; the strokes X 500, Y 400, with 400 mm, year of construction 1999, CE standards, with CNC HEIDENHAIN TNC 310 m, iso 40 spindle with 4.500 revolutions and optical lines. It has 3 axes controlled and interpolated to CNC while the 2 rotary axis of the table are manually operated by means of special mechanical handwheels and the relative dimensions are shown on the control display; reconditioned exercise machine. The DECKEL DMU 50 m 5-axis cnc milling machine is a CNC machine particularly suitable for general machining of medium/small dimensions, such as in the tooling sector, molds, a motorcycle parts; especially for the milling of light alloys and is particularly known in the industry for its build quality, precision and versatility thanks to the possibility of being used also in manual thanks to the presence of the special leaflets, both for the 2 rotary axes ( mechanical) and for the 3 linear (electronic).

Crosscut Saws Kaltenbach


Auction name: Machine trade in Diepenheim Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 24 May 2018 18:30 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Tray sealing machines Turbo systems Heat sealer


Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Bright Beert Tank BBT Holvrieka 400 hl Holvrieka, Denmark Vertical, insulated


Bright Beer Tank BBT Holvrieka 400 hl vertical insulated This BBT is made by Holvrieka in 2003. The tank has a special supporting skirt, normal vacuum and overpressure valves on the top and a CIP bowl inside. Tank is insulated (150 mm PU foam), and cover is gladded. Manufacturer Holvrieka Manufacturing year 2003 Vertical, insulated BBT Volume 400 hl (net), 410 hl (gross) Number of tanks available 2 Insulation 150 mm PU Cooling No cooling jacket Tank dimension Diameter 2.7 m, Height 11.8 m Weight 8700 kg

Cylindrical Grinding Machine KELLENBERGER 1000 U


Center distance: 1000mm, center height: 175mm, max. workpiece diameter: 349mm, max. table travel: 1300mm, table speed: 0.02-2,5m/min, swivelling range: 9°, max. cross slide travel: 285mm, grinding wheel dimensions: 400x50x127mm, rotational speed: 1500-2200mm, workpiece headstock swivelling range: 360°, length: 4000mm, width: 2000mm, weight: 3.1t.

Automatic CIP Line Simonazzi Autosan R4 SIG Simonazzi refurbished in 2018


Automatic CIP Line Simonazzi Autosan R4 – refurbished 2018 This fully automatic CIP line was made by Simonazzi in year 2005 and it was totally refurbished in March 2018. All pumps, valves and instruments are thoroughly maintained, PLC controls was build totally new with Siemens Simatic S7 and touch screen operation. Equipment is today close to new condition. It has 4 x 6 m3 vertical tanks, two washing circuits, both with tube type steam heat exchangers and pumps frequency controlled. In addition, the system has tree additive dozing systems with special acid and alkaline proof dosing pumps and dosing tanks. Manufacturer. SIG Simonazzi Manufacturing year 2005 Model Autosan R4 Main tanks 4 x 6 m3 Serial number SAS 478 Number of circuits 2 Inverters made by Danfoss Touch screen Siemens HMI (new screen) Control PLC Simantic S 7-300 (new PLC) Video: abcs://youtu.be/-QscdXxHI24

Vertical Fermenting Tanks CCT 1300 hl Holvrieka, Denmark Insulated, 1.0 bar


Vertical Fermenting Tanks CCT Holvrieka 1300 hl Gross Tanks are made by Holvrieka in year 1998. They are self standing insulated and glycol cooled with 4 cooling zones. We have four identical tanks, both equipped with CIP bowl and in good condition. Techncial data: • Volume brutto 1300 hl, netto 1100 hl • Made by Holvrieka, Denmark, 1998 • Pressure 1.0 bar • Insulated, insulation PUR foam 150 mm • Glycol cooling 3 cooling zones on the body and cooled cone • Diameter 3550 mm, Total height 18100 mm, Weight 8 200 kg • Equipped with valves, sensors, sample valve, pipes, panels and service platforms • Two lifting hooks on top of CCTs for installation/dismantling

Interfolder HOBEMA 10A-1


Working width: 480mm, cut off length: 210mm, including two embossing roller and two unwinder.

Cut-off saws BOTTENE PUSH 100


Code: 0357 Brand: BOTTENE Model: PUSH 100 - CE Standard Crosscutting line for wooden panels - CE Standard - Year 2008 Loading surface 5000 mm with disappearing pusher with max stroke up to 5100 mm - Movement by tempered steel guide and ball  ...

Wrapping machines ULMA ATLANTA


Cantilever construction that provides for easy cleaning and maintenance, with easy access to mechanical and electrical components. Left to right operating direction. Rotary cross sealing jaws with an electronic overload safety switch. Self-centring fil ...

CNC Universal Milling Machines Goratu Lagun GBM 26


LAGUN GBM 26 Goratu Group milling machine HEIDENHAIN cnc 430 Manual head X longitudinal: 2500 mm Y-cross: 1200 mm With vertical: 1000 mm Quick movements: 15 Mt./min. Spindle connection: 50 ISO Rotation speed: 3000 rpm Spindle connection ...

Double Column Slideway Grinding Machines Sunny machinery SGS-2448 AH / AHD


SGS-2448 AH/AHD Working surface of Table WxL: 600x1200mm Max. Grinding Surface WxL: 600x1200mm Max. Horizontal Travel of Table: 1350mm Max. Cross Travel of Table: 620mm Distance between travel of table: 850mm Spindle speed 60/50HZ: 1150 RPM/60HZ 960 ...

Surface Grinding Machine GERH 10


Grinding area: 450x200x275mm, table surface: 450x180mm, table speed: 1-28m/min, cross travel: 190mm, feed rate: 1-40mm/stroke, vertical rapid traverse: 150mm/min, grinding wheel dimensions: 250x25x51mm, connected load: 4.5kW, weight: 1.3t.

Universal Milling Machines CORREA F2UE


Universal milling machine with automatic movement ram. Table size: 1200mmx440mm. Longitudinal travel: 1000mm. Cross travel: 250mm. Vertical travel: 420mm. Ram travel: 620mm. ISO40. Vertical head. DRO Fagor.

Universal Milling Machines CORREA BC5000UE


Universal milling machine. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

CNC Plasma Cutter CR ELECTRONIC ADVANCED PLASMA HD 9-30


Working area: 3000x9000mm, with Plasma Cutting System HYPERTHERM HT2000, including gas console, high frequency aggregate, control panel and extraction HIROSS PGB 006HA1110100.

CCT Fermenting Tank 4 x 1920 hl Holvrieka, Landaluce outdoor, vertical, cooled


CCT Fermenting Tank 4 x 1920 HL Holvrieka / Landaluce Conical cone fermenting tanks (CCT) with gross capacity 1920 HL and net 1536 HL. All tanks are identical, two of them made by Hovrieka and two of them by Spanish Landaluia - all made in year 1998. T ...

Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce Holvrieka, Landaluce outdoor, vertical, cooled


Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce Conical cone bright beer / fermenting tanks with gross capacity 2500 HL and net 2380 HL. All tanks were supplied by Steinecker two of them made by Hovrieka in year 1998 and two of them by Spanish Landa ...
Find used machinery dealers in your country