oscillating used for sale

Oscilloscope, constant, oscilloscope -Dimensions: 150/350/H215 mm -Quantity: 3 pieces available Price: per piece -Weight: 10 kg

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Oscillator Model: ED-WS -Year of construction: 2017 -Voltage: 220 V -Dimensions: 210/210/H130 mm -Weight: 2.6 kg

Oscilloscope -110-240 V 50-400 Hz -Dimensions: 335/475/H145 mm -Weight: 7 kg

Oscilloscope -Dimensions: 315/450/H185 mm -Weight: 9 kg

Oscilloscope -100-240 V 50-400 Hz -Dimensions: 390/430/H135 mm -Weight: 7 kg

Oscilloscope -Dimensions: 165/450/H250 mm -Weight: 8 kg

SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES - volt. 380/50 - sn AF657 Y11 - year 1998

Oscillating buffing unit HOMAG

1.425 litre, Stock number: T3495, Litre: 1.425, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Agitator: Yes , Agitator type: Frame agitator with scrape from the top, 3 washing wings, Motor: 7/17/22 kW - 740/1480/2955 rpm., Working pressure: 5.0 Bar, Inner diameter: Ø 1180 mm., Outer diameter: D 1350 mm., Total height: 3750 mm., Manufacturer: Oscar Krieger, Model/type: WO 2215, Year: 1974, Other: Homogenizer in the bottom

CNC lathe Angelini Oscar Year of Make: 2003 Control: GE Fanuc Series 21i-T Technical data Permissible diameter on the slide: 320 mm Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Travel Z-axis: 720 mm C-axis: available Tool turret: 12-speed VD30 Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 32 m/min Spindle nose: ASA 5\" Spindle bore: 61 mm Bar Passage: 52 mm Power spindle motor: 15 kW Maximum spindle speed: 4,500 rpm Diameter hydraulic chuck: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck: available Dimensions (L x W x H): 402 x 130 x 199 cm Weight: 4,500 kg Auction-ID: A1-46872-34

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and acc ...

Auction-ID: A7-46410-53

Without BATTERY Auction-ID: A7-47030-67

FREWITT GRANULATOR, MODEL OSCILLO WITT-3 Year of construction: 2017 Mobile oscillating and rotating sieve mill, for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Particle size range: 5 cm - 250 µm Throughput: up to 600 kg/h Product density: up to 2 kg/dm³ Temperature range of product: from -20°C to +60°C Thanks to the continuously variable oscillatory or rotary motion, the constant uniform speed and force application, the product is milled with a very uniform grain-size and a low fraction of fines. DIMENSIONS Length: 1299 mm Width: 860 mm Height: 1417 mm ACCESSORIES INCLUDED 1 mobile HOVMAND drum lifting system (with battery) Sieves 1.00 x 0.63 mm 0.80 x 0.50 mm 2.00 x 1.00 mm 1.00 x 0.63 mm 0.315 x 0.20 mm 1.50 x 1.00 mm 6.00 x 1.50 mm 3.15 x 1.50 mm 0.80 x 0.50 mm ...

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

General SKU255X232 LocationBarneveld CEcheck MakeCos.mec TypeG30 Main Features MaterialStainless steel Motor1.1 KW Width100 mm Specified Features - Sieve granulator Granulating sievecheck oscillating Rotor sizesDia. 100x330 mm Sieve sizesDia. 110x330 mm Sieve perforation0,5x0,5 mm InletDia. 200 mm, with pneumatic valve OutletDia. 200 mm, with pneumatic valve Motor1,10 kW (400 V, 1400 rpm) With variable speed drivecheck Speed324,6 rpm MaterialStainless steel 1.4306 (304L) Information No.017/01 Year of construction2000 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,10x0,95 m Total height1,90 m Weight380 kgSieve granulatorsNew arrivalsCosmecSieves > Sieve granulatorsNew arrivalsBrand > Cosmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

Oil/Condensate Separator

SPECIFICATIONS: Conveyor belt width: 300 mm Shaft: Ø 70 mm Saw blade: Ø 300 mm Working height: max. 110 mm Electronic height adjustment Adjustable feed speed (1.5 kW) Installed power: 46 hp

SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)

We have more than one separators in our stock. Pls feel free to contact with us and check our stocks any time you want.

Height=1.1 m, Overall length= 0.5 m, Overall width= 0.62 m, Net weight= 140 kg,

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

cutting plotter dmsDIGITAL SINAJET DT0906-MT with delivery Specifications: • Machine is already dismantled and stored • Functions (possible in one operation) -Cut - Cutting/scoring -Grooves - Draw/mark • Integrated tools - Tungsten carbide tangential knife for material up to 6 mm, actively rotating - Cutting tool for thin material/slitting tool, rotating (drag knife) - Creasing tool or perforation tool, actively rotating -Pin Accessories: • dmsDIGITAL BAS 70 stand-alone storage system with sensor-controlled speed adjustment, automatic Height adjustment of the stacking table and PLC control • CCD camera for reading registration marks • Prepared as standard for the use of an oscillating knife • TCC automatic tool calibration for tangential knives and oscillating knives • Ehternet connection • Graphic Interface on PC interface (PC must be provide ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

spindle taper: MK 3 total power requirement: 4 kW weight of the machine ca.: 0,620 t Center bore grinding machine - 160 x 1000 LO - small/ large drilling/grinding length: 50/ 1000 mm - Spindle holder: MK 3 - small/ large workpiece diameter: 6/ 160 mm - Grinding head in spindle hole: 125 mm - Oscillation size: 0 to 5 mm - Oscillation double strokes: 125 / min - Speeds: 55/ 110 rpm - Connected load: 4 kW - Weight: 620 kg specification: motor. Material rotation oscillation Switch cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° unit : tilting oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 1,9 / 3,3 - automatic group entry - belt cleaning blower 2° unit : 45° oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 0,6 / 1,2 - autom ...

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400

OSS 100 Spindle Sander Working table length 370 mm Work table width 295 mm Speed 2000 min¯ ¹ Sanding caps diameter 13, 19, 26, 38, 51, 76 mm Spindle diameter 12.7 mm Oscillation stroke 16 mm Oscillation 58 min¯ ¹ Engine 450 W 230 V 50 Hz Dust nozzle diameter 38 mm Length 390 mm, width / depth 330 mm, height 450 mm Weight 14 kg G & pieces 5903500 Option: Subframe

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...

GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Various woodworking machines from different manufacturers are available. 1) Max Striffler type 2750 double mitre saw, year of manufacture: 1983. 2) Stegherr KSF-V universal cross rung miller, year of manufacture: 1991. 3) Stegherr SDB dowel drilling machine for frame constructions, year of manufacture: 1988. 4) Axel Wirth LW 100.5/300, year of manufacture: 2008. 5) Ruchser RU-EBL2.5-M fitting drilling machine, year of manufacture: 2001. 6) Max Mayer (MAKA) STV 170 oscillating chisel mortising machine, year of manufacture: 1994. 7) Max Mayer (MAKA) STV-71 oscillating chisel mortising machine, year of manufacture: 1987. On-site inspection is possible. The machines are only available as a package.

Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...

Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...

Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories:, Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Protection cover., Specifications: Wheel spindle taper: HSK50E (alternatives possibl ...

spindle bore: 40 mm Tools speed: 30...500 U/min oscillation frequency: 5001400 DH/min : 60 kp accuracy +/-: 0,001 mm total power requirement: 6,4 kW weight of the machine ca.: t dimensions of the machine ca.: m - max. diam of work: 350 mm - max. diam for centerless work: 70 … 150 mm - max. worksize: d = 155 mm - work.length: max. 1000 mm - work.length,centerless: 300 mm - hole in spindle: 40 mm - speed of spindle: 30 … 500/ U/min // rpm - oscíllation frequency: 500 .. 1400 DH/min // DS per min - pressure: 60 kp - precision: 0,001 mm - load: 6,4 kW, 380/400~ - Spezifikation: Stock finishing tools incl. - high precision surface micro finishing of pistons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - / Contact us at -

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...