ort oberländer used for sale

Tribloc Procomac / Ortmann & Herbst / Zalkin with Procomac rinser with 55 rinsing stations, Ortmann & Herbst Hansa B filler with 70 filling valves and 10 head Zalkin plastic screw capper incl. pick-and-place system The rinser Procomac will be blocked to the monobloc filler/capper by cardan capacity: approx. 18. 000bph based on 0, 5ltr. PET-bottle

360C ORTHODYNE WIRE BONDER

360C ORTHODYNE Wire Bonder

Intermix Type: EIÜD 4-C with Bran + Lübbe fine dosing pump 4-component mixer Power: 30,000 ltr./h

Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

ORT RP18B overhauled

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector, SOLD - more available in stock, VENDUTA - altre disponibili in stock, Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 18, Number of rollers: 2, PLC: Siemens

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

mechanically switchable clutch, releaseable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling type 100110405 35-12 -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 405/212/H213 mm -Weight: 41 kg

mechanically switchable clutch, detachable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling without type designation -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 310/212/H213 mm -Weight: 32 kg

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

Pressure filler Ortmann + Herbst/Crown Simplimatic 100/15/15 with 100 filling valves, 15head crown corker and 15head Zalkin aluminium cap screw capper with Pick and Place System model: Hansa M year of construction: 1999 running direction: left - right pitch: 113 mm with double pre-evacuation capacity: up to 40,000 bph by 250 ml mineral water bottles up to 30,000 bph by 330 ml beer glass bottles electrics: Siemens S7 with touch panel with safety cladding

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

ORTMANN + HERBST 100 / 20 Type Hansa B with 100 filling valves and 20head aluminium screw capper Pitch: 115 mm Capacity: up to 30.000 bph by 750 ml glass bottles Original year of manufacturing: 1994 The machine was complete refurbished in 2013 by company Hormes / Germany, incl. new electric system with Siemens S 7 and touch panel incl. new main bearing incl. new safety housing around the machine incl. two change part sets for 250 ml bottle and 750 ml bottle

Running direction: left - right Frequency-controlled for 26 mm crown corks Also suitable for PET bottles with crown corks

ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools

ORT 3RP10 PLC thread rolling machine, inverter (RPM), scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die., Number of rollers: 3

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, Overhaul 2026, 2026 Electronic overhaul and electronic retrofit with Siemens PLC (2026) The machine is visible under power in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

Equipment: Overpressure,Manufacturer: W. Ortmann,Condition: used,Volume: 6,000,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,580,Cylindrical length: 2500,Total height: 1,900,Total length: 3,500,Wall thickness floors: 5,Wall thickness cylinder: 5,Technical documents: Drawing, Acceptance certificate,Type plate: Yes,Outlet: DN40 DIN 11851,Note: slight adhesions,Remarks: 1 oval manhole (approx. 420 x 320mm) in the front floor Information in the drawing different loose fittings in the tanks were not correct for the cylinder length (were not correctly installed when the

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper,  ...

Ultrasonic bonding system for semiconductor and electronics manufacturing, suitable for large-wire applications. Type: Model 360C, Serial number: 9701005, Power: 700 W, 95–264 V, 50–60 Hz, Year of construction: approx. 1997 Auction-ID: A7-49816-105

Ultrasonic bonder system for semiconductor and electronics production, suitable for large-wire applications. Type: Model 360C, Serial number: 9711536, Power: 700 W, 95–264 V, 50–60 Hz, Year of construction: approx. 1997 Auction-ID: A7-49816-106