orma hot presse used for sale

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

various hand spindle presses small More: Foot pendulum press Jantsch

Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . . Control repair needed! Details on sale!

AYEL-TECH WORKSHOP PRESS TYPE WPM 10 -Capaciteit 10 ton -Werkbreedte 500 mm -Hand mat-bedienbaar -Pressure gauge PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

Press Erfurt Model: PKZZ-III-250-1FS YOM: 1980 Press capacity: 250 ton Table size: 2500 x 1250 mm – slidding table Slide size: 2500 x 1250 mm Slide stroke: 400 mm Max. height of the tool. Position slider SDAU: 954 mm Min. height of the tool. Position slider SDAD: 715 mm Slide adjustment: 250 mm SPM 25 Cushion drawing: operates

HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm

Mechanical Press KAISER 250 TON. Model: V 250 WR/2340 Condition: good, complete Technical details: Force: 250 T Dimensioni piano: 2000x1200 mm Dimensioni slitta: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 495 mm Number of strokes: 15-60 per mimute

Mechanical Press KAISER 315 TON. Model: V 315 WR/2340 Condition: good, complete Technical details: Force: 315 T Dimensioni piano: 2280x1250 mm Slide size: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 500 mm Number of strokes: 20-60 per mimute

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

AYEL-TECH WORKSHOP PRESS TYPE WPS 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -StöÃ?elboaufnahme DIN 810 50 mm -Work speed max.bis 226kN 39 mm / s -Min. working speed 21 mm / s -Eilabsenkgeschwindigkeit 428 mm / s -Rear hub speed min. / max. 100 / 420 mm / s -Table height above floor 820 mm -Oil quantity approx. 400 ltr -Drive 400 V / 15 kW -Space requirement approx. B 1400 x H 3200 X 2200 mm -Weight approx. 7000 kg -with: - hydr. PIN voltage -Control CNC 50 - separate control panel

AYEL-TECH WORKSHOP PRESS TYPE WPS 60 -Capaciteit 60 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY MAK WORKSHOP PRESS TYPE SHP 250 -Cilinderslag 400 mm -Werkbreedte 1200 x 450 mm -Verplaatsbaar cilinder is -Pressure gauge -Met V-Blokken -Noodstop -Weight 2250 kg -Power 7.5 kVA -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

AYEL-TECH WORKSHOP PRESS TYPE WP 30 -Capaciteit 30 ton -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Description Brand ESMACH Model FOR 3C ID 7256 Status Active Year of manufacture 2006 Location Oradea (RO) Moulder for rolled bread ESMACH FOR 3C manufactured in 2006, with 3 cylinders pre-arranged for manual loading with chute for pieces return. Double anti-waste device, adjustable through micro-metric steering, enabling two pieces to be processed simultaneously, stop device for the upper belt, output performance: 20 to 1200 g. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Spindle press Reissmann AG Saalfeld-Saale for stone production of alumina Built in 1951 Weight 4000 kg L x W x H: 220 x 150 x 300 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Automatic feed: number: 1 Execution: rolls Electro-pneumatic clutch Security/savety device

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850

AYEL-TECH WORKSHOP PRESS TYPE WP 15 -Capaciteit 15 ton -Cilinderslag 260 mm -Werkbreedte 500 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

We have for sale 4 pcs of Hydraulic Press 750 T single action table 3000 x 1900 mm Very good condition Under power

Kieserling Press, mechanic press, 500t, table 2900 x 1550mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Slide pressure: 80 to Total capacity: 800 kN Tool clamping surface: superior: length: 420 mm Width: 420 mm inferior: length: 420 mm Width: 420 mm Die stroke from: 0 mm up to: 90 mm Number of strokes: stepless from: 30 s/min up to: 120 s/min Tool height: from: 150 mm up to: 250 mm Band width: 90 mm Maximum thickness of material: 3 mm Voltage 50 Hz 3x: 380 Volt Main motor: 5.5 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 2970 mm Width: 1665 mm Height: 2420 mm Various accessories: Forward feed device Workpiece counter

Muller Press, hydraulic press force 1000 T, double action, table 2600 x 2250 mm 2 pcs available

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 16 to Execution: number of columns Machine frame: fixed Fixed table: length: 500 mm Width: 300 mm Die from the middle of the slide to the support: 150 mm diameter: 105 mm Distance working table to slide: max: 250 mm Number of strokes: up to: 140 s/min Tool-holder: bore: 40 mm Adjustable stroke: from: 6 mm up to: 80 mm Voltage 50 Hz 3x: 380 Volt Power: 1.50 HP Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1900 mm Various accessories: Foot pedal Lamp Déclanchement à deux mains

Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany

Pneumatic pin press for printed circuit boards

Pneumatic pin press for printed circuit boards

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

MECHANICAL PRESS KRUPP 1000 TONS Model: PDqV 4-1000 Condition: Very good, complete, dismantled Technical details: Force: 1000T Strokes per min. 8-30 The stroke 400 mm Shut height (SDAU) 1300 mm Slide the adjustment 300 mm Slide the dimensions 4200 x 2000 mm Bed size dimensions 4200 x 2000 mm Frontal opening 4300mm Lateral window 2600 x 1400 mm

Hand lever press to push pins in printed circuit boards

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL