We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Specifications: - 2 recording stations with safety chain - Bottle diameter up to approx. 250 mm - straight + inclined bottle position - Load capacity approx. 200 kg - Wheel diameter 380 mm - Space requirement approx. W 800 x D 1000 x H 1250 mm - Weight approx. 40 kg
Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric ...
Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more ...
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mm SLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /min SLIDE (MECH ...
CONTROLS conventional PRESS FORCES total force (nominal): 60 to SLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 11 mm stroke max.: 60 mm variable speed: yes stroke rate (min.): 60 /min stroke rate (max.): 240 /min ATTACHMENTS (PRESSES) strip feeder: yes
Lifting capacity 1000 kg. With charger. ...
pressure: 25 t no. of strokes: 60-300 Hub/min sheet width: 150 mm ram - range of adjustment: 6-50 mm table surface area: 350x400 mm ram surface: 250x250 mm hole in the table: 130x150 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 t throat: 260 mm stroke: 16-80 mm table surface area: 800 x 520 mm distance table/ram: 350 mm strokes - infinitely variable: 50 - 250 Hub/min ram surface: 400 x 300 mm ram adjustment: 70 mm total power requirement: 7,5 kW dimensions of the machine ca.: 2,7 x 1,7 x 2,6 m weight of the machine ca.: 4 t hole in the table: 260 x 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t dayligth: 250 mm stroke: 8 - 50 mm table clamping surface LxW: 620 x 450 mm table height over floor: 980 mm no. of strokes: 85 - 500 Hub/min distance between columns: 680 mm ram - range of adjustment: 50 mm number of T-slots: 4 ram surface: mm total power requirement: 8 kW dimensions of the machine ca.: 2,3 x 2,2 x 2,8 m weight of the machine ca.: 5,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.