orma hot presse used for sale

TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading ...

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wehmoner Membrane Press

Working Sizes: 1300 x 3500 mm

Working Sizes: 1300 x 3500 mm

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make SCHÖN type UTE-BCFabr. -No: 1619 built in 1977Max. Press force: 50 tStroke length: 150 mmTable size: 550 x 750 mmDiarrhea opening: 80 mmBear size: 500 x 300 mmOutreach: 280 mmInstallation height: 350 mmPassage width to the rear: 150 mmDrive power: 7.5 hpDimensions L x W x H: 1300 x 1400 x 2400 mmWeight approx. 2000 kgWith- adjustable stoppage time- Blower- Jogging mode- Photocellused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bread rolls Stüpfler stainless steel 380 volts -30 in part

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1800 Downholders: 5

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

Four-column screw press make AGEO type SP 40/650Technical specifications:Pressure force: 40 tAchievable maximum pressure: 50 tSpindle diameter: 95 mmNumber of guide columns: 4Clear width between the columns: 650 mmInstallation height: 440 mmRam stroke: 345 mmTable surface: 650 x 550 mmPlunger surface: 580 x 250 mmPusher bore: 50 mmTable height: 690 mmDimensions L x W x H: 1800 x 1200 x 1800 mmWeight approx. 2210 kgWith- hydr. Rear lifting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Electro.-Pneum. Hot stamping press Gierlich PE600 with round table, 6 stations manufacturer: Gierlich type: PE600 mach.-nr.: 05437 year of construction: ? comm.-nr.: 0101/100/230/0431 stock-nr.: 1864 + Regular Price: 4.850,- € > Reduced Price: 2.425,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: 600 kg, adjustable height adjustment: 210 mm stamping table size: 300 x 110 mm temperature up to: 400° C, adjustable air pressure up to: 10 bar, adjustable time setting for lifting/lowering: 0 – 6 Sec./Min. voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm  ...

Freshly revised Koller to CPM Press 3022 or 7022 Punched, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available

Hydraulic toggle quick spindle striking press make HILU HILLER & LUTZType KNP 100 C machine -No: 1712 built in 1988Press force: 100 tWork distance from UT: 8 mmStrokes per minute: 70Ram stroke max.:0 - 120 mmRam adjustment: 80 mmInstallation height: 480 mmDischarge: 450 mmTable surface: 800 x 810 mmPlunger surface: 700 x 400 mmDiarrhea opening in the table: 200 mmAnvil plate: 200 x 50 mmDrive power: 18.5 kWDimensions L x W x H approx: 1200 x 1800 x 3000 mmWith- UV for manual inlay work- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Freshly Revised Koller to CPM Press 3022 or 7022 , Fshbone, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available

Table size 2700x1600 mm Number of Table 2

Pressure force 30 t, with feeder, see pictures

Two-column screw press make AGEO type SP 28/510Machine -No: 1596 built in 1966Technical specifications:normal pressing force: 28 tachievable compressive force: 32 tSpindle Diameter: 80mmSpindle pitch per revolution: 48 mmClear width between the columns: 510 mmMax. clear installation height between table and ram: 380 mmStroke of the ram: 260 mmRam clamping surface: 470 x 210 mmPlunger Bore:40mmTable surface: 510 x 400 mmHole diameter: 150mmProtection and grip ring diameter: 1550 mmHeight of the top of the table above the floor: 700 mmMachine height: 2200 mmApprox. weight: 840 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Ricy press with foot release

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foot pendulum press

Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S

Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

various dosing pumps, see pictures

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany

horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Hercules metal press Machine Package size: 20 x 35 x material quantity Drive: 7.5 KW Weight: 2100 kg

Capacity: 200 t Stroke: 900 mm Distance column/center (Throat): 680 mm Table length: 1450 mm Table width: 850 mm Eccentric press SANGIACOMO - T 200 FPR 7055 = Mach4metal Capacity Kg:  200000 Table Length: 1450mm Table Width:  850mm Hole in table:240mm Working height:960mm Ram size:     900 x 680mm Throat:       435mm Stroke:       19 - 230mm Ram adjustment:110mm Strokes:      45Min. Length:       2360mm Width:        1780mm Height:       3865mm Weight:       19000kg

Glue stand hydraulic, double-sided Format L x W: 3000 x 2000 mm L x W x H: 3200 x 2200 x 1100 mm Weight approx. 600 kg Built in 2003 Pressure per cylinder 2500 kg 8 clamping elements 2 Holders The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12