Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg
Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions
Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes
Key data: 230 mm, 460 mm, 25 U/min
Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...
Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...
Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.
OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510
Inv. Num. : 7877 Type: TH 4010 Producer: OPTIMUM Created: 2018 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 410 mm Minimum spindle speed: 45 1/min Maximum spindle speed: 1800 1/min Cone: MK 3 Rotary spindle pass-through diameter: 52 mm Power consumption: 1.5/2.4 kW Length: 1920 mm Width: 740 mm Height: 1222 mm
Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg
This 3-axis Optimum Optimill F 105 was manufactured in 2023. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 800 x 320 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F 105 vertical machining centre we have for sale. Contact us for further details.
A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.
Motor power: 1.1kW / 230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Saw blade speed: 22 / 31 / 55 m/min; Saw blade dimension: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage designSeparate emergency stop impact switchLow-voltage electronics 24 VGerlow-running Mobile machine substructureBall-bearing saw blade guideThree speed levels for a wide-ranging
Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.
Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -
A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.
capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm table-size: 820 x 320 mm tool adaptor: BT 40 turning speed range: 10000 U/min power requirement: 11 kW Control: Sinumerik Steuerung 828D rapid traverse Z-axis: 1500 mm/min rapid traverse X- and Y-axis: 1500 mm/min workpiece weight: 300 kg no. of tools in the magazine: 12 Stück dimensions: 2164 x 1860 x 2200 mm weight of the machine ca.: 2800 kg immediately available - Siemens Sinumerik control 828D with 15.6 inch touch display - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high payloads - High-torque servo drives, directly connected to the ball screw in all three axes three axes - Precision-ground, preloaded high-performance recirculating ball screw (á 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopi ...
This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information.
cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drill Optimum B32, good condition, incl. MK4 mount, 225 mm stop, 125 mm quill strokePrices subject to change, errors, printing and typesetting errors excepted
turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 360 mm centre height: 180 mm turning speeds: 70-2400 U/min total power requirement: 2,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 2000x1500x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible.
