ope used for sale

Operator Panel with Compact Control Cabinet SIEMENS Operator Panel OP15-C2 used, tested ! Dimensions (CABINET): 500 x 500 x 230 mm

Hand-operated handset, machine control, control panel BOSCH PG 100 ( PG100 ) 048547-104 with 2.0 m cable used, tested ! Dimensions: 280 x 105 x 90 mm

Combination wrench, open-end wrench WALTER NW 115 DIN 894 used ! Dimensions: 1000 x 220 x 30 mm

Repacking station for big bags or open bags. Including feed hopper with vibrating function, folding box and screw conveyor Availability: immediately Condition: in working order, well-maintained

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 t, 400 mm, 112 mm

Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26,0 kN stroke: 60 mm throat: 110 mm Working height from to: 70 - 250 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 46 Kg dimensions: 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control in the control panel / machine operating terminalCNC path control FANUCTtype A14B - 0048 - 0002Year of construction: 1990- Machine control panel- electronic handwheel- Flexible silicone PC keyboardDimensions WxHxD: 600 x 260 x 350 mmWeight: approx. 40 kgComes from a GILDEMEISTER CNC lathe.From stock, function not tested, ideal as a spare parts carrier.; used

pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 310 mm stroke: 30-120 mm no. of strokes: 20-60 Hub/min ram - range of adjustment: 90 mm table surface area: 820x600 mm ram surface: 550x430 mm hole in the table: 330x200 mm table height: 750 mm tool hole in ram: Ø50 mm weight of the machine ca.: 9,5 t dimensions of the machine ca.: BxTxH 2500x2500x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

Key data: 100 t, 330 mm, 10 mm

Press Type P 100 RE Pressure 100 ton Free passage between the two uprights 420 mm Slab dimensions 610 x 410 mm Table dimensions 950 x 650 mm Installation height plunger lower 400mm Plunger position 90 mm Stroke rate 55 min Motor power 7.5 KW Weight 7000 kg Press is equipped : - Air coupling - Hydraulic overload protection

Key data: 60 t, 370 mm, 10 mm

Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection

pressure: 30 t throat: 250 mm table-size: 650 x 500 mm stroke: 400 mm dayligth: min. 120 / max. 500 mm Control: Simatic HMI Touch Siemens total power requirement: 13 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700

pressure: 15 t throat: - mm stroke: - mm Dimensions (L/W/H): 1200 x 1200 x 1700 mm total power requirement: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deep Drilling Machine brand Buck Year of construction 2000

WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE