british flag
Resale Logo

ope used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Asset Management Services (UK) Ltd  http://www.amsauctions.co.uk 
banner logo
start page > keywords ope > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125484144 1501

LINDE E20P-02 for sale
Electric forklift trucks


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2006
2,700 €  
  DE   request
125497094 1010

Falck schmidt TS18 Self-Propelled, Electric, 18m W for sale
Telescopic handlers


; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2500; Rear tyres remaining: 30; Front tyres remaining: 30; Maximum lift capacity [kg]: 200
1990
5,900 €  
  NL   request
125484142 209

BRANDT O KDF 660C for sale
Edge banding machines


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2005
12,000 €  
  DE   request
125497096 1010

Falck schmidt TS24 Self-Propelled, Electric, 23.8m for sale
Telescopic handlers


; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 3200; Rear tyres remaining: 40; Front tyres remaining: 40; Maximum lift capacity [kg]: 200
1990
6,900 €  
  NL   request
125484138 209

WEEKE Optimat BHC VENTURE 3 for sale
CNC machining center


Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474) Online auction Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST) Closing time: 05 June 2018 ...
used machine
 
Auction name: Partner auction BVA Auctions & Dechow | Insolvenzauktion | Rapp Zimmerei GmbH (53474)



Online auction

Start of auction: 14 May 2018 11:00 GMT +0200 (Western Europe (DST)
Closing time: 05 June 2018 11:50 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information contact: support@dechow
2005
10,000 €  
  DE   request
125497100 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX3DK12231; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX3DK12231; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
2003
14,900 €  
  NL   request
125480021 305

MADE IN ITALY mm.300 for sale
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER


SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER for extruders 130 to 160 mm diam. sliding plate made in special steel alloy hydraulic piston movement 3 heating areas n.2 removable filtering sections diam. 298 mm. sliding ...

 
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER

for extruders 130 to 160 mm diam.
sliding plate made in special steel alloy
hydraulic piston movement
3 heating areas
n.2 removable filtering sections diam. 298 mm.
sliding between 2 bronze rings
operated by 2 push buttons
termoregulated by control panel
 
15,000   
  IT   request
125497102 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX7DK13277; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX7DK13277; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
2007
21,900 €  
  NL   request
125480017 101

SMTCL VMC 1051 for sale
Numerically Controlled Machining Centres


Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delive ...
used machine
 
Machining center - vertical SMTCL VMC 1051 bearing no 1105-02409 category machining center - vertical make SMTCL type VMC 1051 year 2007 State second-hand machine control CNC storage France country of origin CHINA delivery immediately cargo Base EX WORK technical details x way 1020 mm y way 510 mm z trail 650 mm CNC CNC FANUC 0I MC FANUC table size 1120 X 510 mm ISO 40 spindle adaptor bt spindle speeds 8000 1/min spindle drive motor (30 min) kW tool changer 15 for 24 tools
maximum table load of 1000 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 30 m / min feed range 20000 mm / min weight 7 tons of space approximately 3.0 x 2.60 x 2,90 m description - control: FANUC OI MC.
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2007
28,000 €  
    request
125497104 1010

DENKA-LIFT DL22N Self-Propelled, Electric, 21.9m Working Heig for sale
Telescopic handlers


; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX4DK12449; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX4DK12449; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
2004
15,900 €  
  NL   request
125480011 101

YCM SUPERMAX MV 106 A for sale
Numerically Controlled Machining Centres


Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of o ...
used machine
 
Machining center - vertical SUPERMAX YCM MV 106 A bearing no 1105-02408 category machining center - vertical make SUPERMAX YCM type MV 106 A year 2006 condition second-hand machine control CNC storage France country of origin Taiwan delivery time immediately cargo base EX WORK technical specifications x way 1020 mm y-way 600 mm z-way 600 mm FANUC CNC control 20 I FANUC table size 1120 X 650 mm spindle retainer ISO 40 spindle speeds 8000 bt 1/min spindle drive motor (30 min) kW tool changer 18 for 24 tools of Max table load 1200 kg projection 630 mm coolant system chip conveyor operating voltage 380 V rapid traverse speed 12 m / min feed range 1-5000 mm / min weight 7 tons of space approx. 2.90 x 2.60 x 2.50 m description - St FANUC euerung 20 IN the
-Conveyors - coolant system
MAGAZINE 24 COMPARTMENT DOUBLE ARM
8000 RPM
2006
27,500 €  
    request
125494851 102

RAVENSBURG KH 100-M- CNC for sale
Facing and Centering Lathe


turning diameter over bed: 2400 mmturning diameter over slide rest: 2000 mmturning length: 1800 mmpower capacity: 95 kWmax. torque on faceplate: 80000 Nmmain spindle speeds:: 1-200 U/min main spindle bore: 150 mmmax. wor ...
used machine
 
turning diameter over bed: 2400 mm
turning diameter over slide rest: 2000 mm
turning length: 1800 mm
power capacity: 95 kW
max. torque on faceplate: 80000 Nm
main spindle speeds:: 1-200 U/min
main spindle bore: 150 mm
max. workpiece weight at 540 mm: 8000 kg
faceplate diameter: 2400 mm
total power requirement: 125 kW
weight of the machine ca.: 40 t
dimensions of the machine ca.: 10,4x7x4,3 m
Modernized and equipped with Siemens 840 D SL in 2014!

Machine has following options:
- Linear measuring system
- oil cooling unit
- oil-dust-exhaust
- traveling splash guard
- traveling operator platform
- ATC with 40 stations
- tool measuring device
- cooling unit
- chip conveyor



This ad was created with MODUL MWS - the software solution of LogoTech.
1993
Price  
    request
125479962 1800

VITA CUBE Vita Cube for sale
Ultrasonoscopes


Ultrasonic device Vita cube year 2010
used machine
 
Ultrasonic device Vita cube year 2010
2010
Price  
    request
125494845 102

GILDEMEISTER CTX 200 S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 290 mmturning length: 365 mmcontrol: Heidenhain MANUEL GUIDEgreates pass round over bed: 440 mmx-travel: 160 mmz-travel: 350 mmspindle head: 120 H 5 mmspindle bore: 56 mmbar material dia.: 42 mmspindle  ...
used machine
 
turning diameter: 290 mm
turning length: 365 mm
control: Heidenhain MANUEL GUIDE
greates pass round over bed: 440 mm
x-travel: 160 mm
z-travel: 350 mm
spindle head: 120 H 5 mm
spindle bore: 56 mm
bar material dia.: 42 mm
spindle diameter in front bearing: 90 mm
turning speed range: 20 - 5000 U/min
spindle drive: 9 kW
no. of tools in turret 1: 12 x VDI 30
total power requirement: 22 kW
weight of the machine ca.: 4,2 t
dimensions of the machine ca.: 2,8 x 1,7 x 1,8 m
0114002271

Machine with CE

Heidenhain CNC Pilot 3190
Tool pickup device
Bar loader LNS Super Hydro BAR

C-axis (main spindle)
- speed min / 1 28
- Holding torque Nm 70
- Graduation accuracy degree <0.03

Universal disc turret with driven tools
Number of tool stations 12
   of which max. powered tools 12
   Max. Clamping diameter of the angetr. Tools 13 mm
   Drive line 40% ED kW 5.7

movable tailstock
Chip conveyor
19 hornbin collets with keys
35 x various VDI tools
Hornbuch SPANNTOP
6 x VDI 30 tools driven
Operating instructions, operating instructions, planning documents,
Transport documents and wiring diagram available

Operating hours approx. 23,300 h



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125479915 107

AMADA EUROPE 255 for sale
CNC Punching Machines


OVERVIEW: Brand: AMADA Model: EUROPE 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 31646 Location: Spain Origin country: ...
used machine
 
OVERVIEW:
Brand: AMADA
Model: EUROPE 255
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 2005
Production hours: 31646
Location: Spain
Origin country: France

CONTROL UNIT:
Brand: GE FANUC
Model: Series 18i-PB

MOVEMENT:
X-AXIS:
Movement: 1250 mm
Y-AXIS:
Movement: 1250 mm
2005
Price  
  ES   request
125494837 107

HAEUSLER HPR 12 mech. asym. - V+H for sale
Section Bender


I-beam section - flat steel: 220 bei Dm 1200 mmI-beam section - upend: - mmangular steel - leg outwards: 110x110x14 bei Dm 1000 mmangular steel - leg inwards: 80x80x10 bei Dm 1000 mmflat steel flat: 100 x 20 bei Dm 1000  ...
used machine
 
I-beam section - flat steel: 220 bei Dm 1200 mm
I-beam section - upend: - mm
angular steel - leg outwards: 110x110x14 bei Dm 1000 mm
angular steel - leg inwards: 80x80x10 bei Dm 1000 mm
flat steel flat: 100 x 20 bei Dm 1000 mm
T-steel / side out: 120x120x13 bei Dm 1200 mm
U-iron on the x-axis: 22 bei Dm 1200 mm
pipes: 102 x 6 bei Dm 900 mm
round material: 75 bei Dm 700 mm
square material: 60 x 60 bei Dm 600 mm
bending speed: 3,5 m/min
No. - Rolls: 3
Drive: 7,5 kW
weight: 6,4 t
dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m
Condition: ready for operation:
Electric 380 Volt:
Set of standard rolls: I + H
Motorized adjustable rollers:
Control panel:
Central lubrication: autom.
Rolls for round material: 100 mm
Machine dealer with own stock of 2500 m² and certification of the database
Machineseeker.



This ad was created with MODUL MWS - the software solution of LogoTech.
1976
Price  
    request
125479866 1402

DUAL LIFT EN1808//P509//CE18 for sale
Wire rope hoist, winch, winch pass


Dual lift winch AS GOOD AS NEW 14 working hours also to passenger transport Manufacturer: Dual lift Year of construction: 2012 Type of winch: EN 1808/P509 / / CE18 Load capacity: 600 kg Line speed: 18 m / min  ...
used machine
 
Dual lift winch
AS GOOD AS NEW
14 working hours
also to passenger transport
Manufacturer: Dual lift
Year of construction: 2012
Type of winch: EN 1808/P509 / / CE18
Load capacity: 600 kg
Line speed: 18 m / min

For further details see nameplate or on request.

Pick up possible. Delivery possible. Loading possible.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
2012
Price  
    request
125494824 202

CASOLIN F45 EVO KL +/-45° HSK -Video- for sale
Spindle moulders with tiltable spindle


Table dimensions: 2700,900 mmMotor output: 7,5 kWSpindle diameter: HSK 63F Wahlweisereus: 1000 - 10000 U/minDimensions (L/W/H): 2650x1800x1850 mmWeight: 1360 kgDemonstration machine from exhibition room in Oberkochen.New ...

 
Table dimensions: 2700,900 mm
Motor output: 7,5 kW
Spindle diameter: HSK 63F Wahlweise
reus: 1000 - 10000 U/min
Dimensions (L/W/H): 2650x1800x1850 mm
Weight: 1360 kg
Demonstration machine from exhibition room in Oberkochen.
New machine price 39.800,00 Euro
SPECIAL PRICE SHOWROOM MACHINE 27.000,00 Euro

Demonstrations possible at any time after cancellation!

CASOLIN Type F 45 EVO KL +/- 45 ° with HSK recording and CNC axes
--------------------------------------------------

Table dimensions 2700x900 mm

HSK 63 F-recording (selectable E or F for new machine ordering)

2 pcs spindles for HSK 63 E-mount (1 x 40 mm diameter, 1 x 50 mm
Diameter)

Angled position of the spindle from -45 ° to + 45 °

Spindle length 160 mm

Clockwise and anti-clockwise rotation of the spindle

4-roller feeder with motorized height / width adjustment and
Pneumatic clamping

7.5 KW brake motor with electronic inverter

5 axes with CNC adjustment. Positioning of the stops. Feed
Swing away.

Electronically infinitely variable speed control (1,000 - 10,000 rpm)

Aigner milling stop

Touchscreen 10`` with graphic function. Windows Operating System.

Camera for importing tool and profile images

Stop can be completely swung away (for example, for round arch machining)

Automatic star-delta start-up

Central lubrication

Net weight 1360 kg

With CE standard

OTHER OPTIONS ON REQUEST!

(Technical data according to manufacturer - without guarantee!)

Detailed technical description with pictures see the following
PDF document!

Subject to error and prior sale.



This ad was created with MODUL MWS - the software solution of LogoTech.
 
25,000 €  
    request
125479850 1104

LOOS U-HD 2000 for sale
Steamboiler Loos 2000 kg/h x 11.6 bar


Steam boiler Loos 2000 kg / h x 11.6 bar Manufacturer: LOOS Type: U-HD Capacity: 2,000 kg / h höchstzul. Operating pressure: 11.4 bar Year of construction: 2000 equipped with Dr.reddys gas burner mounted Cab ...

 
Steam boiler Loos 2000 kg / h x 11.6 bar

Manufacturer: LOOS
Type: U-HD
Capacity: 2,000 kg / h
höchstzul. Operating pressure: 11.4 bar

Year of construction: 2000

equipped with Dr.reddys gas burner mounted Cabinet, on the body of the boiler feed water pump, water level sight glass, steam - and safety valve and the existing coarse and fine fittings.

The plant will be out of operation beginning of July.

Location: Hamburg

Condition: Very good

Price with dismantling and loading
 
Price  
    request
125493773 1900

JUNGHEINRICH EJD 20 for sale
Low-Platform Truck


Weight approx.: 1800 kgDimensions (l x w x h) approx.: 2200 x 800 x 1600 mmDescription: Fork length 1400 mm, probably not ready for operation, see photos
used machine
 
Weight approx.: 1800 kg
Dimensions (l x w x h) approx.: 2200 x 800 x 1600 mm
Description: Fork length 1400 mm, probably not ready for operation, see photos
2001
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CNC Punching Machines AMADA EUROPE 255


OVERVIEW: Brand: AMADA Model: EUROPE 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 31646 Location: Spain Origin country: France CONTROL UNIT: Brand: GE FANUC Model: Series 18i-PB MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Movement: 1250 mm

Wire EDM Machine AGIE AGIECUT EVOLUTION 3


X-travel: 500mm, y-travel: 350mm, z-travel: 256mm, max. workpiece dimensions: 1050x550x250mm, max. workpiece weight with/without bath: 400/800kg, control: AGIEVISION, operational hours: ca. 130000h, including handling robot EROWA EASYHAND ROBOSET RS UNO-L.

Generators Atlas Copco QAS 200 VD


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious power: 200 kVA Hours of operation: Approx. 5500/6400/6600/7100 - April 2018

Generators Atlas Copco QAS 150


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Alternator: Mecc-Alte Hours of operation: Approx. 5900 and 6900 / April 2018

Belt Filter Press Rompf KRF 1700


Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor 2 Eccentric screw pumps The belt filter press is dismantled and immediately available.

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Profile rollers SAF SE 101 HP


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses Compac HP 60


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Band Saws Imet / Tuwi BS 280 plus


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Punching Machines Peddinghaus 502


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Convential milling machines Deckel FP2


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Press Brakes Haco PPH 2560


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Center lathes Weiler Commodor


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Center lathes Bulmak CU 587


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Guillotine shears Darley GS 3110


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Compressor KAESER SK 21


Power: 11kW, motor rotational speed: 2950/min, max. operational overpressure: 11bar, ambient temperature: 3-45°C, operational hours: ca. 48000h.

Grit blasting cabin diverse


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic press brakes Safan CNCS 110-3100


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Guillotine shears Safan HVS310-13 / 16


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Welding Robots diverse


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

Spare parts book Heidelberg Quickmaster 46


Original spare parts book for Heidelberg Quickmaster 46- multiligual and operators manual in the German language. We can send worldwide.

CNC Laser Cutting Machines TRUMPF TRUMATIC 260 ROTATION


Notching machine TRUMPF TRUMATIC 260 ROTATION was produced in 1987. Included with the machine set of tools. The data characteristic of CNC TRUMPF TRUMATIC 260 ROTATION: -punching: 25 T -the scope of the work area: 1300 x 2500 mm + reposition -maximum sheet thickness: 6.4 mm -maximum weight of workpiece: 150 kg -the maximum diameter: 76.2 mm -the maximum working speed, the X and Y axes at the same time: 108 m/min. -the maximum working speed, the X axis: 90 m/min. -maximum speed, Y axis: 60 m/min. -the maximum speed of the tool rotation, C-axis: 3600/sec. -the maximum number of strokes: 500/min. -the number of tools in magazine: 10 PCs. -tool changing time: 6.5 seconds.

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

PRESSA PER PRESSOFUSIONE MAICO


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

CNC Milling Machines Elumatec 2009


Profile machining centre SBZ 130 eluCam Description 3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces The on-board turret head ensures that tool changing times are kept very short, thereby optimising machining cycles The turret head can be equipped with eight tools or angle routing heads Automatic clamping adjustment enables the machine to position the material clamps 3-axis controller The tool spindle is designed as an additional axis Network connection Technical specifications Traverse path X-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm (additional lengths on request) Vmax. 60 m/min. Traverse path Y-axis, 485 mm, Vmax. 30 m/min. Traverse path Z-axis, 340 mm, Vmax. 30 m/min. Max. spindle speed 6,000 rpm, 18,000 rpm with high-speed spindle Spindle power output 5.5 kW Tool changer for eight tools on a turret head Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 35 A Air consumption per minute 100 l with spraying Machining length SBZ 130 – 7.2 m Max. machining length with profile end machining, 7,080 mm Max. machining length without profile end machining, 7,200 mm

Rolling mills ZGODA 550L


Rolling machines for rubber CONSENT 550L built in 1967 by the Polish Factories of technical equipment CONSENT in ?wi?toch?owice. The machine has undergone complete renovation in the year 2016 for a total of $118000 NET. The scope of the renovation include gears, bearings, lubrication and a wardrobe. Technical data of rolling mills, rubber CONSENT 550 L: -roll length: 1500 mm -diameter of the rolls: 550 mm -engine power: 100 kW

Pallet transport line EUROPA SYSTEM 20.101122.01


Line for pallet transport EUROPE 20.101122.01 SYSTEM was built in the year 2011. The line is intended for the transport of EURO pallets with details that may protrude beyond the skid up to 200 mm, the performance line-to 74 pallets for a change. The line is used for the transport of EURO pallets of goods with the indirect their handling by the operators. Transport takes place on a conveyor line [1.1]-[1.7]. The system consists of: -pallet roller conveyor loading zone [1.1] -a team of two chain conveyors [1.2, 1.3] -non-driven medium roller roller conveyor [1.6] -chain conveyor accumulation of nep?dem [1.7] -gravity roller conveyor [3] -pallet storage built onto conveyor roller [5] -roller conveyor driven [5] -gravity roller conveyor [6] -non-driven medium roller roller conveyor [1.6] -ball tables, used for the transport of EURO pallets conveyor conveyor [7.1, 7.2] Pallet storage lines are used to transport items on pallets. Pallet magazine can fulfill two functions to retrieve the pallets from the line and collected a heap or stack download pallets and then issuing a pallet lines one at a time. Pallet magazine EUROPA 20.101122.01 SYSTEM-technical data: -the maximum stack weight: 600-1000 kg -maximum number of pallets collected by the magazine: 10-25 -operating pressure: 6-8 bar

Elumatec 2011


Profile machining centre SBZ 140 Description 4-axis profile machining centre Designed for economical and efficient machining of aluminium and thin-walled steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces Machining with all tools at angles continuously adjustable from 0° - 180° The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles The magazine can be equipped with eight tools A rotating angle head with two different tools is available for double-bar and end machining (0°?-?90°?-?180°?-?270°) (option) Two separate working zones enable machining in shuttle operation (option) 4-axis controller 15" colour display, USB ports and network connection Windows operating system Technical specifications Traverse path X-axis, 4,200 mm, 6,400 mm, 7,600 mm, 9,700 mm (additional lengths on request) Vmax. 65 m/min. Traverse path Y-axis, 850 mm, Vmax. 60 m/min. Traverse path Z-axis, 650 mm, Vmax. 60 m/min. Pivoting angle A-axis, 0° - 180°; freely programmable in 1/10° steps Max. spindle speed 24,000 rpm Spindle power output 11 kW, S1 Tool changer for eight tools, additional tool positions on request Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 63 A Air consumption per minute 180 l with spraying Machining length SBZ 140 - 9.7 m Max. machining length with profile end machining, 9,580 mm Max. machining length without profile end machining, 9,700 mm MACHINE IS PERFECT CONDITION. SET UP TIME IS END OF 2012. NOT USED SO MUCH AND FULL FUNTIONALITY.

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Universal Milling Machines LAGUN FU 1600


Universal milling machine LAGUN FU 1600 was produced in 1990 year. Milling machine-specific data LAGOONS FU 1600: -table dimensions: 1600 x 340 mm -the scope of the work the longitudinal: 1150 mm -operating range: 330 mm -operating range vertical: 465 mm -speed range: 28/1400 RPM. -vertical feed: 12/800 mm/min. -feed: 6/240 mm/min. -tilting table: up to 45 degrees -Tools: ISO 50 -accelerators feeds

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Gas generators Caterpillar 3520


2055 KW Caterpillar 3520 Gas Generator in Super Insulated Enclosures Eight (8) 2055 KW Caterpillar G3520 Natural Gas Generators in Super Insulated Arctic Enclosures, 2055 KW Caterpillar 3520 natural gas engines with KATO Generators, 2671hp, 60 Hz, 13.8 KV, 1800 rpm, 60 HZ, 0.7PF. year 2009, Hours range 1300 to 2600 since new. Each generator package has its own Super Insulated Arctic Enclosure and designed to operate in severe cold conditions. Mufflers, Batteries, Battery Chargers, Oil Heaters, Prelube System, Water Pumps, Woodward Governor, panels, ABB Medium Voltage Switch Gear and Allan Bradley Motor Control Center and much more. Lots of equipment included with this package. Fast set up to generate immediate power. Excellent Condition, Great Buy on this Complete Package.

PRESSA PER PRESSOFUSIONE MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from hours 8:30 at 13:00 and 14:00 at 19:00

Veneering presses ORMAMACCHINE P.F/1


Code: 0362 Brand: ORMAMACCHINE Model: P.F/1 Cold press Platens dimension mm 2500 x 1300 Opening mm 500 Electric platen lifting Thrust tonn 15 Overall dimensions: mm 2850 x 1450 x 1950 h Weight kg 1000

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Welding Machines ECKERT CNC JANTAR 2


Plasma cutter CNC ECKERT JANTAR 2 was produced in 2010 year. The parameters characteristic of the cutter ECKERT JANTAR 2: -CNC: CNC ECS 872 -Source: Hypertherm HPR130A XD -the number of operating hours: ok. rbh 3590 and 326701m -table surface: 2000 x 3000 mm -range of track (length x width): 4200 x 3000 mm (2 x 3 rectangle designates the torch – this is exactly the movement) -the thickness of the cutting quality: 20 mm for the current 130 and -the thickness of the cutting quality: 12 mm for the current 80 and

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions
Get the latest machine offers by email: order newsletter