128,255 used machines on RESALE, but how to find them? Machine Search
Servo motor, gear motor, electric motor, three-phase motor -Manufacturer motor: Bautz type M256D-ON101-7000-0-EC -Voltage: 330 V. -Torque: 0.53 Nm -Speed: 5800 rpm -Gearbox manufacturer: Neugart PLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14 -Price: per piece -Number: 3 pieces -Dimensions: 260/55/H80 mm -Weight: 2.4 kg
This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information.
Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...
PerkinElmer Spectrum One FT-IR Spectrometer Without a computer Without software Untested equipment
This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details.
This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details.
Overview This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)
Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)
Machine encore visible en fonctionnement chez utilisateur.
Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue
Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
ECKERT ONYX CNC plasma cutting machine with Kjellberg Q1500 and Dual Flex 3D For sale is a high-quality CNC plasma cutting machine ECKERT ONYX with a working range of 2,500 × 2,000 mm and additional raceway extension. The system is equipped with a powerful Kjellberg Q1500 plasma source, automatic gas console, Dual Flex 3D bevel head, Donaldson extraction and Finest Cut V7.1 CAD/CAM software. The machine enables precise plasma cutting as well as automatic 3D bevel cutting for weld preparation. Thanks to automatic gas management, modern control technology and extensive safety equipment, the plant is ideal for steel construction, mechanical engineering, container construction and contract manufacturing. Highlights: Working range 2,500 × 2,000 mm Kjellberg Q1500 Plasma System Dual Flex 3D Bevel Cutting Head Donaldson Suction DFPRE 6 Cyclopeel 6300 Automatic gas console Fin ...
Komptech Multistar One Sternsieb w. electr. Drive # 7322 Equipment: EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge conveyor Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Uchida Aero Cut One Creaser, Slitter, and Cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Uchida Aero Cut One Creaser, Slitter, and Cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Uchida Aero Cut One Creaser, Slitter, and Cutter Price: 7300 EUR Download PDF Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The dev ...
die-sinking EDM machine, year 1997. Used machine in good condition. More info & price on IndustrialBuyer.
Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data Line type: Complete can filling line Capacity: approx. 6,000 cans/hour Main year of manufacture: 2007 Application: Beer, CSD and ca ...
Impressions=0 m, Condition= New , Availability= 2026-07-07, ? Can mount different boxes on two strips at the same time ? German servo motor system ? German Siemens and Schneider electrical system ? PLC touch screen ? Glueing system with motor control ? Capability to work in different ways with plate ? Gathering system at delivery unit can be adjusted and connected according to job ? Voltage: 380V/50Hz ? Covering area: 4.0 1.4M ? The total power: 8Kw ? Maximum production speed: 400pcs/min ? Air pressure: 0.6Mpa (Dry and clean compressed air) ? Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm ? Blank length(L): 100mm – 450mm ? Blank length(B): 100mm – 450mm ? Height of side flaps(H): 15mm – 260mm ? Height of side flaps+lid(HI): 50mm – 260mm ? Conicity: 5°-40°
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servohydraulic frame design: H-frame, tie rod quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 1100 to stroke: 130 mm stroke rate (max.): 60 /min COUNTER RAM nominal force: 330 to stroke: 40 mm V-RING nominal force: 500 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 960 mm lower table (front-back): 960 mm upper table (left-right): 960 mm upper table (front-back): 960 mm shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 16 mm coil weight max.: 8 to feedstock transport direction: left to right COIL CHAIR coil weight max.: 8 to stroke: 700 mm DECOILER coil weight max.: 8 to max. diameter of coil: 1800 mm m ...
This 3-axis HAGE 3D Precision One was manufactured in 2023. It features a generous build volume of 500 × 700 × 800 mm and a maximum printing temperature of up to 450 °C. The printer is equipped with a heated build chamber and print bed, ensuring optimal conditions for high-temperature plastics. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Precision One industrial FDM/FFF 3D printer we have for sale. Contact us for further details.
TECHNICAL DATA: Fixed portal 5-axis milling head with interpolation Tool magazine with 9 places + 2 additional places with chain unit Tools with HSK-F63 holder Pneumatic loading and unloading Installed power: 40 kW
Iron Removal Container – The Efficient Solution for Iron-Free Water!, Are you looking for a reliable and efficient solution to remove iron from your water?, Discover the Straw / Iron Removal Container – a mobile and flexible solution specially designed to improve your water quality, wherever and whenever you need it!, , Why choose our iron removal container?, ✅ Plug & Play system, Easy installation saves time and effort with a user-friendly design., ✅ Durable and robust, Made from high-quality materials that can withstand harsh conditions, ideal for your iron removal projects., ✅ Flexible deployment, Suitable for temporary or permanent solutions – perfect for locations without fixed infrastructure., ✅ Cost-saving, Reusable systems and low maintenance costs make this a smart long-term investment., How does it work?, By allowing the water to seep into the container from above ...
: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • Feeding rolls • 7 Straightening rolls • Encoder • Shear • Variable speed of 0 to 20 mts/min OPTIONS • Film plastic device • Motorised entry guide • Hydraulic entry table • Hydraulic dauble entry table • Stackers 2, 3, 4, 6 meters. MATERIAL TO BE PROCESSED: WIDTH TO PROCESS: THICKNESS (R=450NW/MM2) PRODUCTION SPEED: CUTTING ACCURACY: COIL LOADING CAPACITY: Steel 420 Nw/mm2 Steel 700 Nw/mm2 Aluminium 200 Nw/mm2 750, 1000, 1250, 1500 mm from0`5 to 1`5 - 2`0 - 3`0 - 4`0 mm up to 20 m/min +/? 0`5 mm 4,6,10,15 to If you are interested, please send us your enquiry with the following details: - Coil weight - Coil width - Coil inner and outer diameter - type of material - Material thickness - Number of slitting lines (only for slitting and cut-to-length lines) - Material to be processed in tonne ...
faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by ...
The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2 ...
Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New
Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...
Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New
One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...
Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
One-way light barrier, optosensor -Item no.: 50081336 -10-30 V DC -Price: per piece -Number: 8x available -Weight: 0.1 kg
Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>
Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Collar shelving, single sided, 4, 16 m high, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.450.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 720 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
One-way light barrier, optosensor -Item no.: 50081336 -10-30 V DC -Price: per piece -Number: 4x available -Weight: 0.1 kg
Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Technical specifications: Maximum hourly output: 500 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/0,18 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1090 x 1465 mm Weight: 460 kg
One belt press EW 1050 Capacity: 900 kg/h Technical specifications: Maximum hourly output: 900 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1490 x 1465 mm Weight: 600 kg
One belt press press EBS 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 850 kg
One belt press EBK 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 790 kg
One belt press EB 804 Capacity: 1850 kg/h Technical specifications: Maximum hourly output: 1850 kg/h Belt width: 800 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1470x 1680 mm Weight: 1270 kg
Reflective light barrier, light barrier, reflective light switch, reflective switch, light switch, reflective light barrier, reflective light switch, one-way light barrier -Manufacturer: ifm, efector200 photoelectric sensor one-way light barrier transmitter, unused -Type: OG5116 -Cardboard dimensions: 95/65/H30 mm -Weight: 0.1 kg
Guided tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Guided tour: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm
One Skive 5-50 Snake Peeler Hydraulic Hose Shelling Auction-ID: A1-47356-19
maximum number of results exceeded
please refine your search
25 € 
