on used for sale

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Maximum distance between head and table: 525 mm Longitudinal stroke: 300 mm (X) Cross stroke: 150 mm (Z) Container dimensions: 600 x 400 x 225 mm C-axis Spanning system Hirschmann Table dimensions: 400 x 275 mm Max table weight 450 kg disk filter

faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120

Remote control ON3 5" scm 20m worked off Delivery in exchange, exchange price! The return delivery of an economical remote control of the same type is mandatory!

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Wire EDM machine 1 Faulty electronic board The machine is located in France.

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Type: Engine, Type number: ONAN 0665T GENERATOR 125 KVA

Tank dimensions: 1000x600x375 mm Working table: 650x400 mm Permissible weight on the table: 1100 kgs Travels (X,Y,Z): 500x300x200 mm Electrode weight: 250 kgs Generator: S2000-60 Power: 9 Kw Equipped with: POLY-SPARK

Wire EDM machine Ona Prima E250 The machine is located in Spain.

Wire EDM machine Ona AE 300 Semi-new in perfect working condition.

This ONA QX8 B1 L erosion machine was made in the year 2016 in Spain. The machine has a weight allowed on the table of 20000 kg.

Description Water thermoregulator Max temperature: above 85 ° Heating Power: 6-12 Kw Pump Power: 0.75

Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine.

Sinking machine ONA BN-180 Electrode holder stroke 150mm Table stroke H 525mm x long 300 x width 150 Tray 600 x 400 x 225 Permissible table mass 450kg S2000 / 30A generator Filter + instructions and manuals + 4 drums of 200 l of dielectric.

Wire EDM ONA ARION K500 (2001) In production X axis (longitudinal) 700 mm Y axis (transverse) 500 mm Z axis (vertical) 400 mm Max piece length 1500 mm Max piece width 1500 mm Max piece weight 5000 kg Max piece height 400 mm Length x width x height: 4150 × 3320 × 3150 mm. Weight: 8200kg Generator weight: 400 kg.

General SKU300U1400 LocationBarneveld MakeMet One TypeA2408-1-115-1 No.2081008-01 Mach.No.940141372C Year of construction01-1994 Extra SpecificationsParticle Sizes: 0.5, 1.0, 5.0, 10.0 μm Sample Flow Rate: 1.0 cfm Printer Input Voltage: 115VAC. MiscellaneousMet OneMiscellaneous > MiscellaneousBrand > Met One What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

X axis: 900 mm Y axis: 400 mm U axis: 80 mm V axis: 80 mm Z-axis: 400 mm Max workpiece size: 1300x800x400 mm Max workpiece weight: 1000 Kgs Max table speed: 900 mm/min Max conical cutting angle: ±30º/45 mm Wire Ø: 0.1-0.3 mm Type of wire spool: DIN 125 - DIN 160 (6 kg max) Min hole Ø: 2 mm Year: 2000 Equipped with: Control: ONA

X axis: 550 mm Y axis: 300 mm Z axis: 400 mm U-axis: 140 mm V-axis: 140 mm Max workpiece size: 1050x800x400 mm Max workpiece weight: 3000 Kgs Max table speed: 2000 mm/min Max conical cutting angle: ±30º/95 mm Wire diameter: 0.1-0.35 mm Type of wire spool: DIN 100-125-160-200-DIN 355 (45 kg max) Min hole Ø: 1.5 mm Max. power: 14 KVA Year: 2005 Equipped with: Control: ONA

CNC Wire EDM CNC type X axis: 350mm Y axis: 250mm Z axis: 200MM Max. workpiece length: 910mm Max. workpiece width: 680mm Max. workpiece height: 200mm

Used ONA ARICUT 250 Wire cutting edm machine Visible in Italy

Inv. Num. : 7039 Type:- Producer: ONI Created: 2010 Parameters: Cooling capacity: 250 kW Equipment: Outdoor Cooling Tower

Key data: 1200 t, 4000 mm, 700 mm

Manufacturer | Manufacturer: ONA - Pres Description | Name: PYZT 1200 Year of construction | Year of manufacture: 1990 Adjustable pressing force | Adjustable pressing force: 1200 - 12000 kN (1200 t) max. lifting height | max. Lifting height: 700 mm Table / Plunger Size | Table / ram size: 1600 x 4000 mm

Description: SERIAL: E22 90 85 Constructed according to ROHS regulations. Approx. Onsite Dimension. (l x w x h): 400 x 600 x 150 mm, weight approx.: 10 kg

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Jäger self cleaning filter

-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.

M. Number: 92238053

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>

Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, single sided, 4, 16 m high, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.450.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 720 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

Technical specifications: Maximum hourly output: 500 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/0,18 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1090 x 1465 mm Weight: 460 kg

One belt press EW 1050 Capacity: 900 kg/h Technical specifications: Maximum hourly output: 900 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1490 x 1465 mm Weight: 600 kg

One belt press press EBS 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 850 kg

One belt press EBK 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 790 kg

One belt press EB 804 Capacity: 1850 kg/h Technical specifications: Maximum hourly output: 1850 kg/h Belt width: 800 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1470x 1680 mm Weight: 1270 kg

1-channel rinser with 40 rinsing stations with safety housing running direction: right - left pitch: 127 mm

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars