omnical used for sale

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

Equipped with: fully equipped LMC 560 P1 touring caravan from 2006 with first admission on March 13, 2007, the caravan has a spacious double French bed at the front and a spacious round seat at the rear that can also be converted into an extra sleeping place, thanks to the complete kitchen, sanitary facilities and extensive equipment, this caravan is suitable for comfortable holidays, equipped with a mover including remote control, Thule Omnistor cassette awning, Walker Esprit awning, Winterhoff WS3000 stabilizer coupling, bicycle carrier on the drawbar, Truma S3002 gas heater with Trumavent ring heating, Thetford absorption fridge with freezer compartment and a Thetford cassette toilet, several manuals, documentation and three keys are also available, the interior is in neat condition and is equipped with a kitchen equipped with gas comfort, sink and refrigerator, a laundry room with si ...

2x New tires Michelin Omnibib 620/70r42 160D Auction-ID: A3-46167-11006

Auction-ID: A7-48173-9

Operation unknown Auction-ID: A1-48502-67

This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information.

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

01 sets Picanol Air-Jet Weaving Loom, type OmniPlus 6-P - 340 YOC 2001, working width 340 cm, 6 weft colors Stäubli cam motion 1661 (of 2006) – 6 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

01 sets Picanol Air-Jet TERRY Weaving Loom, type OmniPlus SUMMUM- 340 YOC 2015, working width 340 cm, 6 weft colors Stäubli DOBBY STAUBLI – electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Used impact mill made by Alpine, type: OMNT200. New: 1962.

Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2006, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :2006

Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2007, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, Thread heating: yes, Total power kW: yes, Wight approx. kg: ca.10, Required space L x W x H mm: 1500, Year :2007

CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of Make: 2005 CNC Control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L weld seam preparations (chamfers) 1 x Skew Rotator with Power Source Kjellberg FineFocus 800 3 x oxy-fuel burner ALFA 1 x FineMarker marking unit Without table, filter and running track

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Te Coop: Endress & Hauser rack 5 x power supply NT470 and 20 x Omnigrad 2173 TMT type power supply: NT 470 (5 x) Type Omnigrad: TMT 2173 (x 20)

We offer a used sorter OS-6-2700-STS of the manufacturer EQUINOX for sale. Description of the product Manufacturer: EQUINOX Type: OS-6-2700-STS Year of construction: 2009 Serial number: P.DWA.119 Overall dimension L: 33000 mm Overall dimension W: 4200 mm Overall dimension H: 1850 mm Sorter capacity: 6000 pieces/hour Characteristics: 2 induction zones consisting of 3 induction positions and omnidirectional barcode scanning; 90 discharge stations + 4 no-read stations Output approx. 6000 pieces per hour; Format sizes for sorted items; weight 0.02-6 kg; Length 70-450 mm; width 70-300 mm; height 5-250 mm The goods must not protrude beyond the contours of the package. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406  ...

mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

German vehicle with 1 previous owner Continental 4-season tires with only 100km mileage, week 36/25 2x keys, all papers (German papers, ZBI and ZBII and COC available), service data sheets, charging cable, truck van entry N1 in the letter (tax-efficient company registration) 3 litre engine with 180 hp. Plenty of storage space at the rear and front PV system with powerful batteries for self-sufficient standing Powerful TRUMA diesel/shore power heater Combi D6(E) incl. hot water and iNet box for remote control. Shore power connection incl. charger for the batteries. Kitchen with 50 liters of fresh water Ceramic hob for cooking with shore power wide 180cm bed, swivel seats Manufactory car! The camper was converted by a professional vehicle builder/carpenter. Non-smoking car 2 seats with expert opinion for Schnierle additional seat (installed by the expert with floor plate). PV s ...

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

Manufacturer: ABB Model: IRB 1200-7/0.9 Omicore Warranty until 23.09.2026 Reach 901 mm Load capacity 7 kg Additional arm load 0.5 kg Axles 6 Robot controller: Omicore C30 Position repeatability: 0.013 mm Cycle time 7 kg version 1 kg pick & place cycle 25 x 300 x 25 mm: 0.4 s Maximum TCP speed: 7.3 m/s Max. TCP acceleration: 35 m/s² Acceleration time: 0 –1 m/s 0.06 s Robot footprint: 210 x 210 mm Weight: 54 kg MANIPULATOR - Manipulator variant: IRB 1200-7/0.9 - Manipulator color: ABB Graphite White std - Manipulator protection: Base 40 - Robot cabling: From the base side STEERING - Control variant: OmniCore C30 - Control Housing: Base - inch rack mounting kit: Yes - Operating temperature: max. 45 °C - Mains voltage: 220–230 V AC +10%/-15% - Connected Services: Wired LAN - Ethernet Switch: 5-port Ethernet switch - Additional logic 24 V power supply: 24 V, 8 A - Fle ...

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, its ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine.

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

Manufacturer: KUKA Roboter GmbH Country of origin: Germany Type: KoM-18000-UTV-D575 Serial number (Werk-Nr): 161 015 Year of manufacture: 2008 Total weight: 6000kg Load capacity: 18 t The KUKA omniMove is a transport platform for heavy loads. Specially designed wheels allow the platform to move in all directions, including from a resting position. The platform is controlled by a remote control

Equipped with: Deutz-Fahr 6185 Agrotron TTV Warrior agricultural tractor, approx. 6,432 operating hours, main specifications, brand: Deutz-Fahr, type: 6185 Agrotron TTV Warrior, engine: Deutz TCD 6.1 L06, 6-cylinder common-rail turbodiesel, displacement: 6,057 cm³, emissions: Stage IV / Tier 4F, rated power: 176 hp (129 kW), maximum power: 183 hp (134.3 kW), maximum power with boost: 188 hp (138.5 kW), stepless TTV transmission, 4 automatic travel ranges, 60 km/h version (limited to 40 km/h), operating hours: approx. 6,432 hours, fuel tanks: 2 × 300 litres, AdBlue tank: 35 litres, load Sensing hydraulic system, variable flow 120 l/min, Power Beyond connection, 8 rear electro-hydraulic valves, 2 front electro-hydraulic valves, depressurised return, electronic lift control, rear linkage lift capacity 9,240 kg, front linkage equipment, front PTO 1000 rpm, MaxiVisionPro cab, cab suspension ...