127,517 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg
Old building materials, various tile remnants, floor coverings, insulation materials, building material, etc., here remnants on gallery
Old crane concrete bombs 3 pcs., nameplates no longer available
Stacking box older model for long material, stackable, 1,000 kg, with contents
Old EDP approx. 25 various monitors SAMSUNG TERRA, without further accessories, completeness and function not checked
Old EDP approx. 12 monitors, plus rack module, box well filled, keyboard, loudspeakers, etc.
OLD EDP consisting of approx. 7 towers, 8 monitors, various cables, keyboards, etc.
OLD EDP consisting of various monitors, towers, various cables, keyboards, accessories, etc. Volume EDP, no check for completeness and function
IFA Wartburg 353W Tourist Oldtimer. First registration 28.12.1983. 900 cc three-cylinder two-stroke engine. 50 hp (37 kW). H license plate. HU/TÜV valid until 07/2027. Mileage read: 21,364 km. Actual mileage not verifiable. Vehicle is ready to drive and complete. 1 vehicle key available. Registration papers available. Bodywork with signs of wear due to age. Several visible filler and repair points on the right side of the vehicle. Partial dents and repainting available. Interior complete. Driver's seat with signs of wear. Radio and additional rev counter retrofitted. Underbody provided with underbody protection. No obvious rust penetration visible in the available photos. trailer hitch. Tyres 175/70 R13 entered. Auction-ID: A1-48285-90002
\" General Description Classic Mercedes-Benz 170 S (W136 IV) four-door saloon with left-hand drive. Powered by a petrol engine with manual transmission. The vehicle is registered in Greece and is presented as a historic collector's vehicle with largely original interior and restored or older black exterior finish. Technical Details Manufacturer: Mercedes-Benz Model: 170 S (W136 IV) Vehicle type: Classic passenger car Registration year: 1957 (production year not confirmed) Chassis/Serial No.: 136922076473 (registration document) Fuel: Petrol Transmission: Manual Seats: 5 Registration: Greece (Historic Plate No. 5959) Condition Good driver-quality classic. Body appears straight with complete chrome trim, original-style wheels and hubcaps, and largely original dashboard and interior. Steering wheel shows age-related cracks and interior wear consistent with normal use. Mecha ...
Steyr 188 Tractor Speed Version (1963) Specifications: Brand: Steyr Model: 188 Year of construction: 1963 Version: Original high-speed version Top speed: approx. 35 km/h Features: New link Completely renewed braking system Four new tyres Completely renewed electrical installation Original speed gearbox Particularities: Fully restored Engine completely overhauled After restoration, it was only used for shows and old-timer rides Chassis and sheet metal completely sandblasted Professionally sprayed in high-quality two-component paint (2K paint) Technically and optically in exceptionally good condition Sought-after original high-speed model Rare example that only appears sporadically on the market Suitable for collection, events and hobby use Auction-ID: A1-47381-15
FIAT TRATTORI 1380 DT | 135 hp | H-Kennzeichen | Restored Powerful all-wheel drive classic car with BAAS front loader, extensive restoration and valid technical inspection until 12/2026. Highlights ✔ 99 kW (135 hp) / 5,461 cc 6-cylinder turbodiesel ✔ Year of manufacture 1981 | H license plate ✔ Technical inspection until 12/2026 without recognizable defects ✔ BAAS Prima 380 F/40 Front Loader with Joystick ✔ Air Brake System (WABCO) ✔ 2 double-acting hydraulic control units (4 connections) ✔ Front and rear wheel weights ✔ 2 additional tanks of approx. 60 litres each ✔ Mitas tyres 420/85 R28 front & 520/85 R38 rear Restoration / Investments ✔ Completely primed and repainted ✔ Cabin fully restored inside ✔ Electrics partially renewed ✔ Front axle revised ✔ Right lifting cylinder renewed ✔ New battery (approx. 3 ...
Completely in order Starts and drives fine New tyres All papers available Auction-ID: A3-46192-19246
Please note; Water pump drips minimally. Featured; PTO; Linkage; 4- Cylinder. (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47380-236
International 724 4x4 – Concours condition | Fully restored | Rare version Only rarely is an International 724 4x4 of this level offered. This exceptionally beautiful tractor has been restored from top to bottom and completely overhauled, with no compromise on quality or finish. The tractor has been completely overhauled technically. Everything has been checked, overhauled or renewed where necessary. It starts immediately, drives perfectly, shifts as it should and brakes excellently. Ready for years of driving pleasure or a prominent place in every collection. For the restoration, the tractor was completely disassembled, sandblasted and professionally sprayed in high-quality 2-component paint. The result is a deep, beautiful shine with a finish that is right down to the smallest details. The technology and finish are also of the highest level: Completely renewed electrical installatio ...
Equipped with rear linkage, overhauled engine, agriomatic, handbrake cannot be tightened, lighting not working, Engine: IH D-155 diesel, Cylinders: 3, Cylinder capacity: 2.5 liters, Auction-ID: A1-47380-247
Eicher tractor fully restored air-cooled Specifications: Brand: Eicher Model: EM 235 Königstiger Engine: air-cooled diesel engine Features: Completely overhauled engine New gaskets, seals and bearings New piston rings Remanufactured cylinder head New front tyres Renewed wiring harness for lighting New headlights New battery (04-2025) Fully sandblasted and sprayed in 2K paint Particularities: Rare model with the world's first air-cooled engine among tractors Technically fully checked Engine runs well and smoke-free Drives, brakes and shifts well After restoration, it was used exclusively for collection and shows Professionally painted by an approved paint shop Auction-ID: A1-47380-22
Commer was a British manufacturer of commercial vehicles that existed from 1905 to 1979. The company produced vans, light and heavy trucks, military vehicles and buses, among others. The Commer brand was exported worldwide, so today examples are still in use outside the United Kingdom, albeit mainly as collector's items. During World War II, Commer produced a series of military vehicles that were still in use even in the 1980s. During the war, British humorist Frank Muir, who served in the army, radioed a broken down vehicle with the words: \"The Commer has come to a full stop\". This impressive Utility Lorry with a large 4.7-liter six-cylinder petrol engine is in attractive condition and is described as technically well. The truck was purchased by a film studio from South East England and driven to their studios for use during filming. The vehicle is finished in the colors and letteri ...
Inspection needed 8304 HOURS WORKING STATE Auction-ID: A3-46167-11061
Beautiful fully restored Eicher EM300 Königstiger. Technically completely overhauled. Engine fitted with new bearings, seals and gaskets. New clutch and pressure group. Completely sandblasted and newly painted. Complete with linkage and hydraulics. Get on and enjoy immediately! Equipped with German papers Auction-ID: A1-47381-7
Hanomag R19 (1956) Specifications: Brand: Hanomag Model: R19 Year of construction: 1956 License plate: Dutch license plate available Features: Completely overhauled engine New gaskets, seals and bearings Remanufactured fuel pump Completely renewed braking system Completely renewed electrical installation New cabling New lighting Professionally blasted and repainted New tyres Equipped with large tires Rare rear linkage PTO (PTO) rear Particularities: Completely restored by an enthusiast Technically overhauled and optically maintained Suitable for use, shows or as a collector's item Equipped with Dutch registration Auction-ID: A1-47381-9
BMW 330i of the G20 series with 2.0-litre TwinPower turbocharged petrol engine, 190 kW (258 hp) and 8-speed automatic transmission. The sporty sedan impresses with its high-quality workmanship, well-maintained overall condition and extensive comfort and safety equipment. The engine compartment, interior and trunk are in a decent state of care. According to the on-board computer, the next service is not due for about 13,000 km or April 2027. The summer tyres were replaced last year. Equipment: • 2.0-litre TwinPower Turbo petrol engine • 8-speed automatic transmission • Rear-wheel drive • Park Distance Control (PDC) front and rear • Rear view camera • Cruise control with speed limiter • Lane departure warning system • Blind Spot Assist • 18-inch BMW alloy wheels • Automatic climate control with separate temperature control in the rear • Multifunction ste ...
Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module -Type: 6ES5 375-OLD11 -Number: 5x module available -Price per piece -Dimensions: 60/90/H15 mm -Weight: 0.1kg/pc.
SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo
used
description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...
used
description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...
new
Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
Demo memory from 2025. The last available machine of the old series at the old price. If you have problems with fusions when recycling cables, this small machine could be the solution. Decouple the process between pre-shredding and granulation and simply let the pre-shredded cable cool down long enough. This allows the cable itself to cool your granulator from the inside out. In addition, you can perfectly dose the amount of cables for your system, so that your system can always run optimally. This small dosing bunker with screw conveyor is specially designed for smaller cable recycling plants up to approx. 250 kg/hour. However, the pumping capacity of this bunker is significantly greater if it "has to go fast". Content approx. 650 litres or 400 - 500 kg pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduct ...
MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €
Used, partially repaired, tested truck engine in exchange The old part deposit in the amount of 2,500.00 Euro will be credited again regardless of the condition of the old engine 6-month warranty Price plus VAT and shipping
Fuselage engine Actros OM 501 LA - Euro 2 - Type 541.922 - Truck engine in exchange The engine is completely overhauled with new pistons, cylinder bushings, new bearings and new oil pump. The cylinder heads are completely overhauled with new valves and valve guides. The compressor crankshaft and compressor connecting rods are pre-assembled. The old part deposit in the amount of 1,500.00 Euros will be credited, regardless of the condition of the old engine. Warranty: 1 year without KM limit Price plus VAT and shipping
Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.
IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...
blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.
Key data: 180 KW, 400 V
SEnergie Biogas CHP G926 TIE Biogas electricity and heat generators from 2010, 131,187 operating hours, with control cabinet. 180 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: mecc old ECO38 3L4, 350 KVA Manufacturer: SEnergie Model: G926 TIE Type: Biogas CHP Serial number: 09.7178-207 Power [KWel]: 170 Power [KVA]: 225 Voltage [V]: 400 Current [A]: 325 Frequency [Hz]: 50 Engine: Liebherr G926 TI Engine power [KW]: 180 Year of Make: 2010 Engine hours: 131,187 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.6 x 1.4 x 2.3 AC generator mecc old ECO38 3L4 Manufacturer: mecc alte Model No.: ECO38 3L4 Type: AC Synchronous Generator Serial Number: 0002001275 Power [KVA]: 350 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 505 Speed [1/min]: 1,500 Year of Make: 2017 Weight [kg]: 905
Chest of drawers approx. 75 years old Price: 360,-€ Cabinet approx. 50 years old Price approx. 290,-€
Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where th ...
Secure approximately 840 m² of Layher Blitz façade scaffolding with a 1.09 m system width 🚀 Packages of this size are rarely available and offer scaffolding contractors and construction companies an excellent opportunity to expand their inventory quickly and cost-effectively 🔥 This extensive Layher Blitz façade scaffolding package is ideal for façade work, renovation projects, large construction sites, and expanding existing scaffold inventories. The package includes frames, U-decks, access platforms, guardrails, diagonals, toe boards, and base jacks, all based on the proven Layher Blitz frame scaffolding system ⚡ The quality mix ranging from 0 Star to 3 Star condition provides a significant price advantage and makes this package especially attractive for companies looking for used scaffolding , large material volumes, and cost ...
Secure approximately 840 m² of Layher Blitz façade scaffolding for façade projects, renovations, large construction sites, and inventory expansion 🚀 Packages of this size are rarely available and offer scaffolding contractors and construction companies an excellent opportunity to expand their inventory quickly and cost-effectively. The material is available immediately and ready for short-term deployment 🔥 This extensive Layher Blitz façade scaffolding package with a 0.73 m system width includes frames, U-decks (partially with access openings), guardrails, diagonals, toe boards, and base jacks, all based on the proven Layher Blitz frame scaffolding system . All components are fully compatible with original Layher equipment and are ideally suited for professional jobsite use ⚡ The included quality mix ranging from 0 Star to 3 Sta ...
The tractor is 7 years old ISEKI SXG326H diesel riding mower, year 2017, equipped with a central cutting deck and a rear collector with hydraulic emptying at height. 15.4 kW (20.9 hp) diesel engine. Weight 530 kg. The mower is 2 years old, regular maintenance see photos Plan for 1700 hours of maintenance Auction-ID: A3-46167-35734
<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now
Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...
Basic-outdated 5 reihige Multimatik machine was dismantled and built up anew. all wearing parts renews. chamber completely reworks. measuring pistons anew new tapes chains etc. electrical system anew new plastic funnel machine can be pursued only or with fermenting cupboard. taking back old machine possibly more pictures on inquiry
maximum number of results exceeded
please refine your search
1 € 
